II-VI Semiconductor Materials and their Applications


Book Description

II-VI Semiconductor Materials and Their Applications deals with II-VI compound semiconductors and the status of the two areas of current optoelectronics applications: blue-green emitters and IR detectors. Specifically, the growth, charactrtization, materials and device issues for these two applications are described. Emphasis is placed on the wide bandgap emitters where much progress has occurred recently.The book also presents new directions that have potential, future applications in optoelectronics for II-VI materials. In particular, it discusses the status of dilute magnetic semiconductors for mango-optical and electromagnetic devices, nonlinear optical properties, photorefractive effects and new materials and physics phenomena, such as self-organized, low-dimensional structures.II_VI Semiconductor Materials and Their Applications is a valuable reference book for researchers in the field as well as a textbook for materials science and applied physics courses.




Growth and Optical Properties of Wide-Gap II–VI Low-Dimensional Semiconductors


Book Description

This volume contains the Proceedings of the NATO Advanced Research Workshop on "Growth and Optical Properties of Wide Gap II-VI Low Dimensional Semiconductors", held from 2 - 6 August 1988 in Regensburg, Federal Republic of Germany, under the auspices of the NATO International Scientific Exchange Programme. Semiconducting compounds formed by combining an element from column II of the periodic table with an element from column VI (so called II-VI Semiconductors) have long promised many optoelectronic devices operating in the visible region of the spectrum. However, these materials have encountered numerous problems including: large number of defects and difficulties in obtaining p- and n-type doping. Advances in new methods of material preparation may hold the key to unlocking the unfulfilled promises. During the workshop a full session was taken up covering the prospects for wide-gap II-VI Semiconductor devices, particularly light emitting ones. The growth of bulk materials was reviewed with the view of considering II-VI substrates for the novel epitaxial techniques such as MOCVD, MBE, ALE, MOMBE and ALE-MBE. The controlled introduction of impurities during non-equilibrium growth to provide control of the doping type and conductivity was emphasized.




Wide Bandgap Semiconductors


Book Description

This book offers a comprehensive overview of the development, current state, and future prospects of wide bandgap semiconductor materials and related optoelectronics devices. With 901 references, 333 figures and 21 tables, this book will serve as a one-stop source of knowledge on wide bandgap semiconductors and related optoelectronics devices.




Properties of Aluminium Gallium Arsenide


Book Description

The alloy system A1GaAs/GaAs is potentially of great importance for many high-speed electronics and optoelectronic devices, because the lattice parameter difference GaAs and A1GaAs is very small, which promises an insignificant concentration of undesirable interface states. Thanks to this prominent feature, a number of interesting properties and phenomena, such as high-mobility low-dimensional carrier gases, resonant tunnelling and fractional quantum Hall effect, have been found in the A1GaAs/GaAs heterostructure system. New devices, such as modulation-doped FETs, heterojunction bipolar transistors, resonant tunnelling transistors, quantum-well lasers, and other photonic and quantum-effect devices, have also been developed recently using this material system. These areas are recognized as not being the most interesting and active fields in semiconductor physics and device engineering.




Properties of Semiconductor Alloys


Book Description

The main purpose of this book is to provide a comprehensive treatment of the materials aspects of group-IV, III−V and II−VI semiconductor alloys used in various electronic and optoelectronic devices. The topics covered in this book include the structural, thermal, mechanical, lattice vibronic, electronic, optical and carrier transport properties of such semiconductor alloys. The book reviews not only commonly known alloys (SiGe, AlGaAs, GaInPAs, and ZnCdTe) but also new alloys, such as dilute-carbon alloys (CSiGe, CSiSn, etc.), III−N alloys, dilute-nitride alloys (GaNAs and GaInNAs) and Mg- or Be-based II−VI semiconductor alloys. Finally there is an extensive bibliography included for those who wish to find additional information as well as tabulated values and graphical information on the properties of semiconductor alloys.




Wide Bandgap Semiconductor Power Devices


Book Description

Wide Bandgap Semiconductor Power Devices: Materials, Physics, Design and Applications provides readers with a single resource on why these devices are superior to existing silicon devices. The book lays the groundwork for an understanding of an array of applications and anticipated benefits in energy savings. Authored by the Founder of the Power Semiconductor Research Center at North Carolina State University (and creator of the IGBT device), Dr. B. Jayant Baliga is one of the highest regarded experts in the field. He thus leads this team who comprehensively review the materials, device physics, design considerations and relevant applications discussed. - Comprehensively covers power electronic devices, including materials (both gallium nitride and silicon carbide), physics, design considerations, and the most promising applications - Addresses the key challenges towards the realization of wide bandgap power electronic devices, including materials defects, performance and reliability - Provides the benefits of wide bandgap semiconductors, including opportunities for cost reduction and social impact




Handbook of II-VI Semiconductor-Based Sensors and Radiation Detectors


Book Description

Three-volumes book “Handbook of II-VI Semiconductor-Based Sensors and Radiation Detectors” is the first to cover both chemical sensors and biosensors and all types of photodetectors and radiation detectors based on II-VI semiconductors. It contains a comprehensive and detailed analysis of all aspects of the application of II-VI semiconductors in these devices. The first volume "Materials and Technologies" of a three-volume set describes the physical, chemical and electronic properties of II-VI compounds, which give rise to an increased interest in these semiconductors. Technologies that are used in the development of various devices based on II-VI connections, such as material synthesis, deposition, characterization, processing, and device fabrication, are also discussed in detail in this volume. It covers also topics related to synthesis and application of II-VI-based nanoparticles and quantum dots, as well their toxicity, biocompatibility and biofunctionalization.




Handbook of Hydrothermal Technology


Book Description

Quartz, zeolites, gemstones, perovskite type oxides, ferrite, carbon allotropes, complex coordinated compounds and many more -- all products now being produced using hydrothermal technology. Handbook of Hydrothermal Technology brings together the latest techniques in this rapidly advancing field in one exceptionally useful, long-needed volume.The handbook provides a single source for understanding how aqueous solvents or mineralizers work under temperature and pressure to dissolve and recrystallize normally insoluble materials, and decompose or recycle any waste material. The result, as the authors show in the book, is technologically the most efficient method in crystal growth, materials processing, and waste treatment. The book gives scientists and technologists an overview of the entire subject including: À Evolution of the technology from geology to widespread industrial use. À Descriptions of equipment used in the process and how it works.À Problems involved with the growth of crystals, processing of technological materials, environmental and safety issues.À Analysis of the direction of today's technology. In addition, readers get a close look at the hydrothermal synthesis of zeolites, fluorides, sulfides, tungstates, and molybdates, as well as native elements and simple oxides. Delving into the commercial production of various types, the authors clarify the effects of temperature, pressure, solvents, and various other chemical components on the hydrothermal processes. - Gives an overview of the evolution of Hydrothermal Technology from geology to widespread industrial use - Describes the equipment used in the process and how it works - Discusses problems involved with the growth of crystals, processing of technological materials, and environmental and safety issues




Cumulative Subject and Author Index Including Tables of Contents, Volumes 1-50


Book Description

Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The "Willardson and Beer" Series, as it is widely known, has succeeded in publishing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise indeed that this tradition will be maintained and even expanded.Reflecting the truly interdisciplinary nature of the field that the series covers, the volumes in Semiconductors and Semimetals have been and will continue to be of great interest to physicists, chemists, materials scientists, and device engineers in modern industry.




Effect of Disorder and Defects in Ion-Implanted Semiconductors: Electrical and Physiochemical Characterization


Book Description

Defects in ion-implanted semiconductors are important and will likely gain increased importance in the future as annealing temperatures are reduced with successive IC generations. Novel implant approaches, such as MdV implantation, create new types of defects whose origin and annealing characteristics will need to be addressed. Publications in this field mainly focus on the effects of ion implantation on the material and the modification in the implanted layer afterhigh temperature annealing. Electrical and Physicochemical Characterization focuses on the physics of the annealing kinetics of the damaged layer. An overview of characterization tehniques and a critical comparison of the information on annealing kinetics is also presented. - Provides basic knowledge of ion implantation-induced defects - Focuses on physical mechanisms of defect annealing - Utilizes electrical and physico-chemical characterization tools for processed semiconductors - Provides the basis for understanding the problems caused by the defects generated by implantation and the means for their characterization and elimination