Pushing the KIT 2 MW Coaxial-Cavity Short-Pulse Gyrotron Towards a DEMO Relevant Design


Book Description

Magnetic fusion is one approach to generate thermonuclear fusion power in an environmental friendly way. The Electron Cyclotron Resonance Heating is considered as the major concept for startup, heating and control of the fusion plasma. Megawatt-class gyrotrons generate the required microwave power. This work focuses on advanced key components and technologies for a DEMO relevant 2 MW gyrotron. One major focus is on the development of advanced Magnetron Injection Guns. Another focus is on the red




A First 2 MW-Class (136)/170/204 GHz Multi-Frequency Gyrotron Pre-Prototype for DEMO: Design, Construction and Key Components Verification


Book Description

Ein Gyrotron wird in magnetisch eingeschlossenen Plasmaexperimenten für Heizung, Stromtrieb, Plasmastabilisierung und Plasmadiagnostik verwendet. In dieser Arbeit wird der erste Entwurf und Bau eines Mehrfrequenz-/Mehrzweck Pre-Prototyp Gyrotrons in koaxialer Technologie vorgestellt, das bei (136)/170/204 GHz mit einer Ausgangsleistung von 2 MW arbeitet. Dies ist der erste Schritt zum Betrieb bei Frequenzen bis zu 240 GHz unter Verwendung der Koaxialhohlraum-Gyrotrontechnologie. - A gyrotron is used in magnetically confined plasma experiments for heating, current drive, plasma stabilization and plasma diagnostics. This work presents the first design and construction of a multi-frequency / multi-purpose coaxial-cavity pre-prototype gyrotron operating at (136)/170/204 GHz with an output power of 2 MW. It is the first step towards operating frequencies up to 240 GHz using the coaxial-cavity gyrotron technology.




MultPhysics Modelling towards the Stabilization of PAN Fibers with Microwaves Based on Experimental Data


Book Description

High energy demand is one reason for high costs of carbon fibers. One option to decrease them is to use microwave heating instead of conventional heating. In this work, steps towards a microwave assisted process during the stabilization phase are presented. In-situ dielectric measurements are performed and a reaction kinetics model is setup in connection to the dielectric loss. This allows to calculate a stabilization degree and fiber temperatures leading to a basic process understanding.




Automated Mode Recovery and Electronic Stability Control for Wendelstein 7-X Gyrotrons


Book Description

Magnetic confinement fusion relies on plasma heating and plasma control using gyrotron oscillators providing at megawatt power levels. The operational reliability decreases when operating at the performance limits due to increasing parasitic mode activity. This work demonstrates for the first time the automated, fast recovery of nominal gyrotron operation during a pulse by exploiting the hysteretic gyrotron behaviour after a mode switch being in use at the Wendelstein 7-X ECRH facility.




Energy-efficient, scalable and modular industrial microwave applicator for high temperature alkaline hydrolysis of PET


Book Description

Microwave-assisted alkaline hydrolysis of PET can be 20 times faster and at lower temperatures. This work presents a novel industrial microwave applicator at 2.45 GHz with homogeneous distribution to support this reaction, which allows an efficient and continuous operation. In addition, an innovative dielectric and calorimetric measurements setup is presented. Furthermore, the modelling of the reaction kinetics based on the measured dielectric parameters is presented.




New Type of sub-THz Oscillator and Amplifier Systems Based on Helical-Type Gyro-TWTs


Book Description

This work presents the development of a new sub-THz source for the generation of trains of coherent high-power ultra-short pulses at 263 GHz via passive mode-locking of two coupled helical gyro-TWTs. For the first time, it is shown that the operation of such passive mode-locked helical gyro-TWTs in the hard excitation regime is of particular importance to reach the optimal coherency of the generated pulses. This could be of particular interest for some new time-domain DNP-NMR methods.










Magnetic Fusion Technology


Book Description

Magnetic Fusion Technology describes the technologies that are required for successful development of nuclear fusion power plants using strong magnetic fields. These technologies include: • magnet systems, • plasma heating systems, • control systems, • energy conversion systems, • advanced materials development, • vacuum systems, • cryogenic systems, • plasma diagnostics, • safety systems, and • power plant design studies. Magnetic Fusion Technology will be useful to students and to specialists working in energy research.




Introduction to Terahertz Electronics


Book Description

This book provides a practical guide to terahertz electronics, especially for readers with an electronics background. The author guides readers through the all the key concepts of terahertz electronics, including terahertz sources, detectors, and waveguides, together with reviews on key terahertz applications on spectroscopy, imaging, communication, and radar. This book will serve as a handy reference for graduate students and engineers in the field of terahertz with a viewpoint from electronics. Presents the topic of terahertz from electronics viewpoint; Designed to be particularly helpful for the readers familiar with semiconductor devices and circuits; Enables optics-based terahertz researchers to understand terahertz electronics; Based on the author’s extensive experience from both industry and academia.