Roof Tiling and Slating


Book Description

If you have never fixed a roof tile or slate before but have wondered how to go about repairing or replacing them, then this is the book for you. Many of the technical books about roof tiling and slating are rather vague and conveniently ignore some of the trickier problems and how they can be resolved. In Roof Tiling and Slating, the author rejects this cautious approach. Kevin Taylor uses both his extensive knowledge of the trade and his ability to explain the subject in easily understandable terms, to demonstrate how to carry out the work safely to a high standard, using tried and tested methods. Topics covered: considers the various types of tiles, slates and roofing materials on the market and their uses, how to estimate the required quantities, and where to buy them; discusses how to check and assess a roof and how to identify and rectify problems; describes how to efficiently 'set out' roofs from small, simple jobs to larger and more complicated projects, thus making the work quicker, simpler and neater; examines the correct and the incorrect ways of installing background materials such as underlay, battens and valley liners; explains how to install interlocking tiles, plain tiles, and artificial and natural slates; covers both modern and traditional methods and skills, including cutting materials by hand without the assistance of power tools; provides invaluable guidance on repairs and maintenance issues, and highlights common mistakes and how they can be avoided.




Roof Slating and Tiling


Book Description

This facsimile edition of Bennett and Pinion's classic work, first published in 1935, provides an invaluable source of information on all aspects of the slating and tiling industry. It examines the various types of roof coverings that were traditionally used, such as slates, clay tiles and shingles, and includes basic aspects such as sorting and holding states, through to more complex aspects involved in sorting and setting out a diminishing course roof, and forming swept and laced valleys. The book also looks at special roofing techniques relating to curved roofs and cupolas. It considers the care of roofs, discussing the faults which can appear, and why they may have occurred, and then how best to repair them.




Slate Roofs 1926


Book Description

This 132-page book is a reproduction of the original 84-page classic "Slate Roofs," published in January 1926. We adapted the title to be more compatible with a 21st century readership, and made some corrections and stylistic changes. Almost all the information is presented exactly as in the original publication, even anachronistic references. Included at the end of the book are 47 additional pages including 21st century guidelines for slate roof installation, repair, and restoration, as well as excerpts from the 2016 Slate Roof Bible 3rd Edition.Published February 2020. 132 pages, 8.5"X11". Soft cover, black and white, eight pages are full color. Compiled, edited, and designed by Joseph Jenkins. Published by Joseph Jenkins Inc., Grove City, PA. ISBN: 978-1-7336035-0-8; Library of Congress Control Number: 2020901720. Printed in the USA.




The Slate Roof Bible 3rd Edition


Book Description

Joseph Jenkins climbed on his first slate roof in 1968, authored the first edition of The Slate Roof Bible in 1997, and published the second edition in 2003. Both editions received national awards. Now, a dozen years later, Jenkins is still very active in the slate roofing industry. The third edition of the book reflects more than a decade of additional experience being passed on to the reader by the man who is arguably the foremost expert on slate roofs in the United States today. The third edition, hardbound, completely updates and expands the material in the second edition, with more emphasis on the craft of slate roof installation. Expanded sections include slate siding, eyebrow dormers, turrets, soldering, flashings, international slate, American slate history, slating styles, installation and repair tips, and trade secrets. Dozens of new color photographs have been added, as well as step-by-step illustrations and line drawings. This book is sure to become a classic. It belongs on the shelf of every architect, roofer, slate roof owner, architectural consultant, history buff, and anyone in the roofing industry.




Roofing Handbook


Book Description

CD-ROM contains: Directory of Internet resources.




Roof Construction and Repair


Book Description

Written by a traditional roofer during the Second World War, this reprint of the 1945 edition presents useful step by step guidance on the right techniques for laying and repairing roofs. It highlights the options for repairing damage rather than stripping and relaying the roof. The first four chapters describe the timber construction of roofs covering everything from basic joints through to the differences in the design of traditional and trussed roofs. It also provides extensive practical information of the design of pitched and flat roofs, jointing around roof lanterns, fixing lay boards up the pitch of the roofs and the setting out of steps in horizontal gutters. The following chapters describe slates and slating, tiling, wood and asphalt shingles, diamond slating and fibre cement slating.




Goss's Roofing Ready Reckoner


Book Description

Goss’s Roofing Ready Reckoner provides cutting angle and lengths for traditional ‘cut’ roofs and design tables for timber sizing, based on BS5268 ‘Structural use of timber’ and now including a comparison of timber sizes using Eurocode 5 ‘Design of Timber Structures’. Additional information is provided on wall plate and gable strapping, wind bracing, truss clips and other roofing metalwork, plus information on tools, equipment and health and safety matters. Detailed drawings for tiling, slating and other roof coverings are included, with fixing requirements revised to BS 5534:2014. Information on lead substitutes and roofing putties is also provided. Design of warm and cold roofs is fully covered, including ventilation and insulation requirements. The fifth edition also includes new chapters on engineered timber roofing components, solar panel fixing and outbuilding roofs.




Roofs


Book Description




Goss's Roofing Ready Reckoner


Book Description

Goss's Roofing Ready Reckoner provides rafter dimensions for timberroofs of any span and pitch. Additional information is provided onwall plate and gable strapping, wind bracing, truss clips and otherroofing metalwork, and tools and equipment. This new edition includes roof timber member design tables,information on warm and cold roofs, their ventilation andinsulation, plus detailed drawings for tiling, slating and otherroof coverings. Also of interest Roof Construction and Loft Conversion Fourth Edition C. N. Mindham 978 14051 3963 2 Cover illustration by kind permission of David Wilson Homes Cover design by Andy Meaden




Roof Construction and Loft Conversion


Book Description

Full of detailed construction drawings, this book covers cut roofs,bolted truss roofs, trussed rafter roofs, trimmed openings andventilation. A major section deals with loft to attic room conversions, givingguidance on planning procedures, as well as dealing with structuralmatters and specifying conversion work. The Fourth Edition features a new chapter covering the growingnumber of engineered timber components available in the housebuilding industry. The use of I beams and roof cassettes isdetailed for roof and room-in-the-roof construction. The text hasbeen fully updated to current standards and features additionaldetailed construction drawings. The chapters on attic conversionand construction have been expanded and a new attic conversiondecision flow chart added. The book will prove invaluable to architects, house builders, roofcarpenters, building control officers, trussed rafter manufacturersand students of building technology. The Author C.N. Mindham BSc has had a wide experience in the constructionindustry. After three years with TRADA as Eastern Regional Officer,he spent 11 years developing a timber engineering business tobecome one of the country's largest producers of trussedrafters. He became Managing Director of a company designing andmanufacturing trussed rafters, joinery and prefabricated timberbuildings, a post he held for eight years. Subsequently he startedhis own consultancy for the timber industry which has led him tohis current position as Managing Director for a joinery andengineering company. Also of interest Loft Conversions John Coutts 1-4051-3043-1 9781-4051-3043-1 The Building Regulations Explained and Illustrated Twelfth Edition M.J. Billington, M.W. Simons and J.R. Waters 0-6320-5837-4 9780-6320-5837-4 Cover design by Garth Stewart Cover illustrations courtesy of VELUX and Mr C. Lovell,Wellingborough, Northamptonshire.