Shock Waves in Condensed Matter - 1983


Book Description

Shock Waves in Condensed Matter – 1983 covers the proceedings of the American Physical Society Topical Conference, held in Santa Fe, New Mexico on July 18-21, 1983. The book focuses on the response of matter to dynamic high pressure and temperature. The selection first elaborates on the review of theoretical calculations of phase transitions and comparisons with experimental results; theoretical and experimental studies of shock-compressed benzene and polybutene; and theory of the iron equation of state and melting curve to very high pressures. The text then ponders on nonhydrostatic effects in stress-wave induced phase transformation of calcite; Bauschinger effect model suitable for use in large computer codes; and strain rate sensitivity prediction for porous bed compaction. The manuscript takes a look at flaw nucleation and energetics of dynamic fragmentation, shock loading behavior of fused quartz, and aluminum damage simulation in high-velocity impact. Shock wave diagnostics by time-resolved infrared radiometry and non-linear Raman spectroscopy; Raman scattering temperature measurement behind a shock wave; and experiments and simulation on laser-driven shock wave evolution in aluminum targets are also discussed. The selection is a dependable reference for scientists and readers interested in the response of matter when exposed to dynamic high pressure and temperature.




Shock Waves in Condensed Matter


Book Description

The Fourth American Physical Society Topical Conference on Shock Waves in Condensed Matter was held in Spokane, Washington, July 22-25, 1985. Two hundred and fifty scientists and engineers representing thirteen countries registered at the conference. The countries represented included the United States of America, Australia, Canada, The People's Repub lic of China, France, India, Israel, Japan, Republic of China (Taiwan), United Kingdom, U. S. S. R, Switzerland and West Germany. One hundred and sixty-two technical papers, cov ering recent developments in shock wave and high pressure physics, were presented. All of the abstracts have been published in the September 1985 issue of the Bulletin of the American Physical Society. The topical conferences, held every two years since 1979, have become the principal forum for shock wave studies in condensed materials. Both formal and informal technical discussions regarding recent developments conveyed a sense of excitement. Consistent with the past conferences, the purpose of this conference was to bring together scientists and engineers studying the response of condensed matter to dynamic high pressures and temperatures. Papers covering experimental, theoretical, and numerical studies of con densed matter properties were presented. A noteworthy feature of this conference was the participation by several leading scientists engaged in static high pressure research. Donald Curran served as the Master of Ceremonies at the conference banquet, which was at tended by two hundred and seventy-five conference participants and guests including Dr. Samuel Smith, the new President of Washington State University. Dr.




Shock Waves in Condensed Matter--1983


Book Description

Shock Waves in Condensed Matter - 1983 ...




Shock-Wave Phenomena and the Properties of Condensed Matter


Book Description

One of the main goals of investigations of shock-wave phenomena in condensed matter is to develop methods for predicting effects of explosions, high-velocity collisions, and other kinds of intense dynamic loading of materials and structures. Based on the results of international research conducted over the past 30 years, this book is addressed not only to experts in shock-wave physics, but also to interested representatives from adjacent fields of activity and to students who seek an introduction to the current issues.




Shock Wave Compression of Condensed Matter


Book Description

This book introduces the core concepts of the shock wave physics of condensed matter, taking a continuum mechanics approach to examine liquids and isotropic solids. The text primarily focuses on one-dimensional uniaxial compression in order to show the key features of condensed matter’s response to shock wave loading. The first four chapters are specifically designed to quickly familiarize physical scientists and engineers with how shock waves interact with other shock waves or material boundaries, as well as to allow readers to better understand shock wave literature, use basic data analysis techniques, and design simple 1-D shock wave experiments. This is achieved by first presenting the steady one-dimensional strain conservation laws using shock wave impedance matching, which insures conservation of mass, momentum and energy. Here, the initial emphasis is on the meaning of shock wave and mass velocities in a laboratory coordinate system. An overview of basic experimental techniques for measuring pressure, shock velocity, mass velocity, compression and internal energy of steady 1-D shock waves is then presented. In the second part of the book, more advanced topics are progressively introduced: thermodynamic surfaces are used to describe equilibrium flow behavior, first-order Maxwell solid models are used to describe time-dependent flow behavior, descriptions of detonation shock waves in ideal and non-ideal explosives are provided, and lastly, a select group of current issues in shock wave physics are discussed in the final chapter.




Solids Under High-Pressure Shock Compression


Book Description

Since the 1950s shock compression research contributed greatly to scientific knowledge and industrial technology. As a result, for example, our understanding of meteorite impacts has substantially improved, and shock processes have become standard industrial methods in materials synthesis and processing. Investigations of shock-compressed matter involve physics,electrical engineering, solid mechanics, metallurgy, geophysics and materials science. The description of shock-compressed matter presented here, which is derived from physical and chemical observations, differs significantly from the classical descriptions derived from strictly mechanical characteristics. This volume, with over 900 references, provides an introduction for scientists and engineers interested in the present state of shock compression science.




Shock Compression of Condensed Matter - 1991


Book Description

The papers collected together in this volume constitute a review of recent research on the response of condensed matter to dynamic high pressures and temperatures. Inlcuded are sections on equations of state, phase transitions, material properties, explosive behavior, measurement techniques, and optical and laser studies. Recent developments in this area such as studies of impact and penetration phenomenology, the development of materials, especially ceramics and molecular dynamics and Monte Carlo simulations are also covered. These latest advances, in addition to the many other results and topics covered by the authors, serve to make this volume the most authoritative source for the shock wave physics community.




Shock Waves


Book Description

Shock wave research covers important inderdisciplinary areas which range from basic topics on gasdynamics, combustion and detonation, physico-chemistry of high temperature gases, plasma physics, astro and geophysics, materials science, astronautics and space technology to medical and industrial applications. This book includes 202 papers presented at the 18th the International Symposium on Shock Waves which describe the research frontier of shock wave phenopmena and 14 plenary lectures which show the state of the art of various fields of shock wave research. This proceedings is a unique collection of most important and updated shock wave research.




Shock Waves in Materials Science


Book Description

In this volume, the shock compression technology of materials is described in parallel with the latest research results and their background. In the past, this type of technology was developed in connection with military techniques by certain particular research organizations. For this reason, researchers of materials in general have had less opportunity to make use of the technology. The conventional technology of shock compression has now been established, and is recognized as being remarkably useful as a means of materials science study. The feasibility of shock compression technology is dealt with in this book, as well as the latest research results for general material scientists. The shock synthesis of ceramics and intermetallic compounds, as well as shock compression behavior, are also described. In contrast to conventional works of this kind, this book describes shock compression studies performed by material scientists.




High-Pressure Chemistry and Physics of Polymers


Book Description

High-Pressure Chemistry and Physics of Polymers is devoted to covering all areas of high-pressure polymer materials science. Topics addressed include the synthesis of polymers, changes in reactivity, structural transformations, molecular dynamics, relaxation processes, deformational properties, chemical modification, and the effect of shock waves and shear stresses. The authors' contributions reflect over 60 years of Soviet study in the field of physico-chemistry conducted at the major former Soviet Institutes of Chemical Physics, Organic Chemistry, Polymer Chemistry, and Physical Chemistry. Fundamental topics such as compressibility of polymers, polymerization under pressure, viscoelastic/deformational properties, and polymer modification are discussed with an eye toward materials development for improving physical models and methods of calculating the changing parameters of materials under pressure. The book is a valuable reference to data on mechanisms of physical and chemical processes, in addition to new experimental data for improving physical models and methods of calculating changes in material characteristics under compression loads. High-Pressure Chemistry and Physics of Polymers will be an important reference for graduate students and practicing professionals in polymer chemistry and polymeric materials.