Author : Quarterman Lee
Publisher : Enna Products Corporation
Page : 170 pages
File Size : 45,39 MB
Release : 2006
Category : Production engineering
ISBN : 1897363435
At last, this much anticipated book has been published and provides a much needed breath of fresh air. The Strategos Guide to Value Stream and Process Mapping has helpful tips on facilitating group VSM exercises and helps put VSM in the greater Lean context. With photos and examples of related Lean practices, the book focuses on implementing VSM, not just on drawing diagrams and graphs. This is the most comprehensive and practical book on the subject to date.
Author : Quarterman Lee
Publisher : CRC Press
Page : 166 pages
File Size : 16,67 MB
Release : 2023-05-09
Category : Business & Economics
ISBN : 1000943755
At last, this much anticipated book has been published and provides a much needed breath of fresh air. The Strategos Guide to Value Stream and Process Mapping has helpful tips on facilitating group VSM exercises and helps put VSM in the greater Lean context. With photos and examples of related Lean practices, the book focuses on implementing VSM, not just on drawing diagrams and graphs. This is the most comprehensive and practical book on the subject to date.
Author : Rianne Appel-Meulenbroek
Publisher : Routledge
Page : 292 pages
File Size : 31,79 MB
Release : 2021-08-02
Category : Business & Economics
ISBN : 1000434206
Although workplace design and management are gaining more and more attention from modern organizations, workplace research is still very fragmented and spread across multiple disciplines in academia. There are several books on the market related to workplaces, facility management (FM), and corporate real estate management (CREM) disciplines, but few open up a theoretical and practical discussion across multiple theories from different disciplines. Therefore, workplace researchers are not aware of all the angles from which workplace management and effects of workplace design on employees has been or could be studied. A lot of knowledge is lost between disciplines, and sadly, many insights do not reach workplace managers in practice. Therefore, this new book series is started by associate professor Rianne Appel-Meulenbroek (Eindhoven University of Technology, the Netherlands) and postdoc researcher Vitalija Danivska (Aalto University, Finland) as editors, published by Routledge. It is titled ‘Transdisciplinary Workplace Research and Management’ because it bundles important research insights from different disciplinary fields and shows its relevance for both academic workplace research and workplace management in practice. The books will address the complexity of the transdisciplinary angle necessary to solve ongoing workplace-related issues in practice, such as knowledge worker productivity, office use, and more strategic management. In addition, the editors work towards further collaboration and integration of the necessary disciplines for further development of the workplace field in research and in practice. This book series is relevant for workplace experts both in academia and industry. This second book in the series focuses on the role of workplace management in the organization and the tasks that workplace management needs to consider. The 18 theories that are presented in this book and applied to workplace research discuss management aspects from the organization’s perspective or dive deeper into issues related to people and/or building management. They all emphasize that workplace management is a complex matter that requires more strategic attention in order to add value for various stakeholders. The final chapter of the book describes a first step towards integrating the presented theories into an interdisciplinary framework for developing a grand workplace management theory.
Author : Jan Stentoft Arlbjørn
Publisher : Academica
Page : 228 pages
File Size : 41,29 MB
Release : 2010
Category : Business logistics
ISBN : 9788776758141
Author : H. Fred Walker
Publisher : Quality Press
Page : 416 pages
File Size : 31,7 MB
Release : 2019-03-09
Category : Technology & Engineering
ISBN : 1951058747
The quality inspector is the person perhaps most closely involved with day-to-day activities intended to ensure that products and services meet customer expectations. The quality inspector is required to understand and apply a variety of tools and techniques as codified in the American Society for Quality (ASQ) Certified Quality Inspector (CQI) Body of Knowledge (BoK). The tools and techniques identified in the ASQ CQI BoK include technical math, metrology, inspection and test techniques, and quality assurance. Quality inspectors frequently work with the quality function of organizations in the various measurement and inspection laboratories, as well as on the shop floor supporting and interacting with quality engineers and production/service delivery personnel. This handbook supports individuals preparing to perform, or those already performing, this type of work. It is intended to serve as a ready reference for quality inspectors and quality inspectors in training, as well as a comprehensive reference for those individuals preparing to take the ASQ CQI examination. Examples and problems used throughout the handbook are thoroughly explained, are algebra-based, and are drawn from real-world situations encountered in the quality profession. To assist readers in using this book as a ready reference or as a study aid, the book has been organized to conform explicitly to the ASQ CQI BoK. Each chapter title, all major topical divisions within the chapters, and every main point has been titled and then numbered exactly as they appear in the CQI BoK.
Author : Rajkishore Nayak
Publisher : Springer Nature
Page : 321 pages
File Size : 44,48 MB
Release : 2022-08-29
Category : Technology & Engineering
ISBN : 9811921083
This book highlights the concepts of lean manufacturing that help to achieve the objectives of sustainability in a global competitive atmosphere. Lean can help to lower the manufacturing cost in the rising labour and material cost market. Lean is based on various fundamental concepts such as Kaizen, Kanban, Zidoka, 5S and Six Sigma, which aim at reducing process waste for efficiency and productivity that are discussed in this book. In addition, the technological changes such as introduction of Internet technologies and Industry 4.0 are taken care by the lean concepts, which are also addressed in this book.
Author : John Politis
Publisher : Academic Conferences Limited
Page : 593 pages
File Size : 24,32 MB
Release : 2012
Category : Leadership
ISBN : 1908272910
Published by Academic Conferences and Publishing International Limited Edited by: Professor John Politis, Neapolis University Pafos, Cyprus. CD version of the proceedings of the 8th European Conference on Management Leadership and Governance - ECMLG 2012 hosted by the Neapolis University on the 8-9 November 2012. 567 pages
Author : Bunji Tozawa
Publisher : PCS Inc.
Page : 396 pages
File Size : 26,72 MB
Release : 2001
Category : Business & Economics
ISBN : 9780971243699
The goal of this book is to guide improvement activities throughout the organization: to use creative ideas from all employees to serve both internal and external customers, to unlock the hidden potential of every single employee, and to bring new excitement and joy into the workplace. Based on the concept of kaizen, this book discusses how every team member is empowered with the ability to improve their work environment.
Author : Douglas M. Lambert
Publisher : Supply Chain Management Inst
Page : 460 pages
File Size : 28,69 MB
Release : 2008
Category : Business & Economics
ISBN : 9780975994931
Author : Shahrukh A. Irani
Publisher : CRC Press
Page : 725 pages
File Size : 38,79 MB
Release : 2020-05-04
Category : Business & Economics
ISBN : 1000055612
In the 1950’s, the design and implementation of the Toyota Production System (TPS) within Toyota had begun. In the 1960’s, Group Technology (GT) and Cellular Manufacturing (CM) were used by Serck Audco Valves, a high-mix low-volume (HMLV) manufacturer in the United Kingdom, to guide enterprise-wide transformation. In 1996, the publication of the book Lean Thinking introduced the entire world to Lean. Job Shop Lean integrates Lean with GT and CM by using the five Principles of Lean to guide its implementation: (1) identify value, (2) map the value stream, (3) create flow, (4) establish pull, and (5) seek perfection. Unfortunately, the tools typically used to implement the Principles of Lean are incapable of solving the three Industrial Engineering problems that HMLV manufacturers face when implementing Lean: (1) finding the product families in a product mix with hundreds of different products, (2) designing a flexible factory layout that "fits" hundreds of different product routings, and (3) scheduling a multi-product multi-machine production system subject to finite capacity constraints. Based on the Author’s 20+ years of learning, teaching, researching, and implementing Job Shop Lean since 1999, this book Describes the concepts, tools, software, implementation methodology, and barriers to successful implementation of Lean in HMLV production systems Utilizes Production Flow Analysis instead of Value Stream Mapping to eliminate waste in different levels of any HMLV manufacturing enterprise Solves the three Industrial Engineering problems that were mentioned earlier using software like PFAST (Production Flow Analysis and Simplification Toolkit), Sgetti and Schedlyzer Explains how the one-at-a-time implementation of manufacturing cells constitutes a long-term strategy for Continuous Improvement Explains how product families and manufacturing cells are the basis for implementing flexible automation, machine monitoring, virtual cells, Manufacturing Execution Systems, and other elements of Industry 4.0 Teaches a new method, Value Network Mapping, to visualize large multi-product multi-machine production systems whose Value Streams share many processes Includes real success stories of Job Shop Lean implementation in a variety of production systems such as a forge shop, a machine shop, a fabrication facility and a shipping department Encourages any HMLV manufacturer planning to implement Job Shop Lean to leverage the co-curricular and extracurricular programs of an Industrial Engineering department
