50 Years Progress in Crystal Growth


Book Description

There is no question that the field of solid state electronics, which essentially began with work at Bell laboratories just after World War II, has had a profound impact on today's Society. What is not nearly so widely known is that advances in the art and science of crystal growth underpin this technology. Single crystals, once valued only for their beauty, are now found, in one form or another in most electronic, optoelectronic and numerous optical devices. These devices, in turn, have permeated almost every home and village throughout the world. In fact it is hard to imagine what our electronics industry, much less our entire civilization, would have been like if crystal growth scientists and engineers were unable to produce the large, defect free crystals required by device designers. This book brings together two sets of related articles describing advances made in crystal growth science and technology since World War II. One set is from the proceedings of a Symposium held in August 2002 to celebrate 50 years of progress in the field of crystal growth. The second contains articles previously published in the newsletter of the American Association for Crystal Growth in a series called "Milestones in Crystal Growth".The first section of this book contains several articles which describe some of the early history of crystal growth prior to the electronics revolution, and upon which modern crystal growth science and technology is based. This is followed by a special article by Prof. Sunagawa which provides some insight into how the successful Japanese crystal growth industry developed. The next section deals with crystal growth fundamentals including concepts of solute distribution, interface kinetics, constitutional supercooling, morphological stability and the growth of dendrites. The following section describes the growth of crystals from melts and solutions, while the final part involves thin film growth by MBE and OMVPE.These articles were written by some of the most famous theorists and crystal growers working in the field. They will provide future research workers with valuable insight into how these pioneering discoveries were made, and show how their own research and future devices will be based upon these developments.·Articles written by some of the most famous theorists and crystal growers working in the field·Valuable insight into how pioneering discoveries were made.·Show how their own research and future devices will be based upon these developments




Handbook of Crystal Growth


Book Description

Volume IAHandbook of Crystal Growth, 2nd Edition (Fundamentals: Thermodynamics and Kinetics) Volume IA addresses the present status of crystal growth science, and provides scientific tools for the following volumes: Volume II (Bulk Crystal Growth) and III (Thin Film Growth and Epitaxy). Volume IA highlights thermodynamics and kinetics. After historical introduction of the crystal growth, phase equilibria, defect thermodynamics, stoichiometry, and shape of crystal and structure of melt are described. Then, the most fundamental and basic aspects of crystal growth are presented, along with the theories of nucleation and growth kinetics. In addition, the simulations of crystal growth by Monte Carlo, ab initio-based approach and colloidal assembly are thoroughly investigated. Volume IBHandbook of Crystal Growth, 2nd Edition (Fundamentals: Transport and Stability) Volume IB discusses pattern formation, a typical problem in crystal growth. In addition, an introduction to morphological stability is given and the phase-field model is explained with comparison to experiments. The field of nanocrystal growth is rapidly expanding and here the growth from vapor is presented as an example. For the advancement of life science, the crystal growth of protein and other biological molecules is indispensable and biological crystallization in nature gives many hints for their crystal growth. Another subject discussed is pharmaceutical crystal growth. To understand the crystal growth, in situ observation is extremely powerful. The observation techniques are demonstrated. Volume IA - Explores phase equilibria, defect thermodynamics of Si, stoichiometry of oxides and atomistic structure of melt and alloys - Explains basic ideas to understand crystal growth, equilibrium shape of crystal, rough-smooth transition of step and surface, nucleation and growth mechanisms - Focuses on simulation of crystal growth by classical Monte Carlo, ab-initio based quantum mechanical approach, kinetic Monte Carlo and phase field model. Controlled colloidal assembly is presented as an experimental model for crystal growth. Volume IIB - Describes morphological stability theory and phase-field model and comparison to experiments of dendritic growth - Presents nanocrystal growth in vapor as well as protein crystal growth and biological crystallization - Interprets mass production of pharmaceutical crystals to be understood as ordinary crystal growth and explains crystallization of chiral molecules - Demonstrates in situ observation of crystal growth in vapor, solution and melt on the ground and in space




Crystal Growth Technology


Book Description

In this book top experts treat general thermodynamic aspects of crystal fabrication; numerical simulation of industrial growth processes; commercial production of bulk silicon, compound semiconductors, scintillation and oxide crystals; X-ray characterization; and crystal machining. Also, the role of crystal technology for renewable energy and for saving energy is discussed. It will be useful for scientists and engineers involved in crystal and epilayer fabrication as well as for teachers and graduate students in material science, chemical and metallurgical engineering, and micro- and optoelectronics, including nanotechnology.




Springer Handbook of Crystal Growth


Book Description

Over the years, many successful attempts have been chapters in this part describe the well-known processes made to describe the art and science of crystal growth, such as Czochralski, Kyropoulos, Bridgman, and o- and many review articles, monographs, symposium v- ing zone, and focus speci cally on recent advances in umes, and handbooks have been published to present improving these methodologies such as application of comprehensive reviews of the advances made in this magnetic elds, orientation of the growth axis, intro- eld. These publications are testament to the grow- duction of a pedestal, and shaped growth. They also ing interest in both bulk and thin- lm crystals because cover a wide range of materials from silicon and III–V of their electronic, optical, mechanical, microstructural, compounds to oxides and uorides. and other properties, and their diverse scienti c and The third part, Part C of the book, focuses on - technological applications. Indeed, most modern ad- lution growth. The various aspects of hydrothermal vances in semiconductor and optical devices would growth are discussed in two chapters, while three other not have been possible without the development of chapters present an overview of the nonlinear and laser many elemental, binary, ternary, and other compound crystals, KTP and KDP. The knowledge on the effect of crystals of varying properties and large sizes. The gravity on solution growth is presented through a c- literature devoted to basic understanding of growth parison of growth on Earth versus in a microgravity mechanisms, defect formation, and growth processes environment.




Handbook of Silicon Based MEMS Materials and Technologies


Book Description

Handbook of Silicon Based MEMS Materials and Technologies, Third Edition is a comprehensive guide to MEMS materials, technologies, and manufacturing with a particular emphasis on silicon as the most important starting material used in MEMS. The book explains the fundamentals, properties (mechanical, electrostatic, optical, etc.), materials selection, preparation, modeling, manufacturing, processing, system integration, measurement, and materials characterization techniques of MEMS structures. The third edition of this book provides an important up-to-date overview of the current and emerging technologies in MEMS making it a key reference for MEMS professionals, engineers, and researchers alike, and at the same time an essential education material for undergraduate and graduate students. - Provides comprehensive overview of leading-edge MEMS manufacturing technologies through the supply chain from silicon ingot growth to device fabrication and integration with sensor/actuator controlling circuits - Explains the properties, manufacturing, processing, measuring and modeling methods of MEMS structures - Reviews the current and future options for hermetic encapsulation and introduces how to utilize wafer level packaging and 3D integration technologies for package cost reduction and performance improvements - Geared towards practical applications presenting several modern MEMS devices including inertial sensors, microphones, pressure sensors and micromirrors




Crystal Growth of Si Ingots for Solar Cells Using Cast Furnaces


Book Description

Crystal Growth of Si Ingots for Solar Cells Using Cast Furnaces is the first book written to both comprehensively describe these concepts and technologies and compare the strengths and weaknesses of various techniques. Readers will learn about the basic growth and characterization of Si crystals, including sections on the history of cast methods for Si ingots for solar cells. Methods discussed include the dendrite cast method, as well as other significant technologies, including the high-performance (HP) cast and mono-like cast methods. These concepts, growth mechanisms, growth technologies, and the problems that still need to be solved are all included in this comprehensive volume. - Covers the concept of crystal growth, providing an understanding of each growth method - Discusses the quality of Si ingot, mainly from the viewpoint of crystal defects and their control - Reviews fundamental characterization concepts to discern the quality of ingots and wafers - Discusses concepts and technologies to establish a low-temperature region in a Si melt using the NOC method in order to obtain a uniform and large Si single ingot with low stress




Modern Inorganic Synthetic Chemistry


Book Description

Modern Inorganic Synthetic Chemistry, Second Edition captures, in five distinct sections, the latest advancements in inorganic synthetic chemistry, providing materials chemists, chemical engineers, and materials scientists with a valuable reference source to help them advance their research efforts and achieve breakthroughs. Section one includes six chapters centering on synthetic chemistry under specific conditions, such as high-temperature, low-temperature and cryogenic, hydrothermal and solvothermal, high-pressure, photochemical and fusion conditions. Section two focuses on the synthesis and related chemistry problems of highly distinct categories of inorganic compounds, including superheavy elements, coordination compounds and coordination polymers, cluster compounds, organometallic compounds, inorganic polymers, and nonstoichiometric compounds. Section three elaborates on the synthetic chemistry of five important classes of inorganic functional materials, namely, ordered porous materials, carbon materials, advanced ceramic materials, host-guest materials, and hierarchically structured materials. Section four consists of four chapters where the synthesis of functional inorganic aggregates is discussed, giving special attention to the growth of single crystals, assembly of nanomaterials, and preparation of amorphous materials and membranes. The new edition's biggest highlight is Section five where the frontier in inorganic synthetic chemistry is reviewed by focusing on biomimetic synthesis and rationally designed synthesis. - Focuses on the chemistry of inorganic synthesis, assembly, and organization of wide-ranging inorganic systems - Covers all major methodologies of inorganic synthesis - Provides state-of-the-art synthetic methods - Includes real examples in the organization of complex inorganic functional materials - Contains more than 4000 references that are all highly reflective of the latest advancement in inorganic synthetic chemistry - Presents a comprehensive coverage of the key issues involved in modern inorganic synthetic chemistry as written by experts in the field




Wafer Manufacturing


Book Description

Presenting all the major stages in wafer manufacturing, from crystals to prime wafers. This book first outlines the physics, associated metrology, process modelling and quality requirements and the goes on to discuss wafer forming and wafer surface preparation techniques. The whole is rounded off with a chapter on the research and future challenges in wafer manufacturing.




A Modern History of Materials


Book Description

What could the ancient Egyptians tell us about 3D printing? How can we make lithium-ion batteries greener and more sustainable? Which materials will form the heart of future quantum computers? Plastic films, glass optical fibers, silicon crystals, and more — this book is about the history of the materials that have rapidly transformed our society over the last century and their role in the major global challenges of the future. From metal alloys ushering in a new age of industry to advanced materials laying the atomic brickwork of the Digital Revolution, the book examines the societal impact of the modern materials revolution through the twin lenses of stability and sustainability. Why aren’t maglev trains mainstream? Whatever happened to graphene and carbon nanotubes? The book also looks at the unmet promises of some of the most exciting — and hyped — technologies in recent decades — superconductivity and nanotechnology. The final chapter reviews our history of materials usage, the increasing demand for many critical raw materials, and addresses the upcoming new challenges for creating a circular economy based on reusing and recycling materials.




Apatites and their Synthetic Analogues


Book Description

Apatite-type minerals and their synthetic analogues are of interest of many industrial branches and scientific disciplines including material sciences, chemical industry, agriculture, geology, medicine and dentistry. This book provides a basic overview of general knowledges of this topic in order to provide the comprehensive survey from a scientific and technological perspective. The book is divided into 10 chapters, which are devoted to the structure and properties of minerals from the supergroup of apatite, experimental techniques of preparation and characterization of synthetic analogues of apatite minerals, substitution in the structure of apatite as well as utilization of these materials in wide range of common and special advanced applications in industry, material sciences and research. Additionally, the phosphate rocks, their classification, geological role, mining and beneficiation of phosphate ore, production of elemental phosphorus, phosphoric acid and fertilizers are also described. Although this book is meant for chemist, material scientist and research engineers, the individual chapters contain theoretical background, historical aspects as well as examples of synthetic and analytical methods which may be also interesting for students and non-expert readers as well.