Author : V. Ganesan
Publisher : Universities Press
Page : 252 pages
File Size : 18,27 MB
Release : 1996
Category : Spark ignition engines
ISBN : 9788173710155
This book contains the theory and computer programs for the simulation of spark ignition (SI) engine processes. It starts with the fundamental concepts and goes on to the advanced level and can thus be used by undergraduates, postgraduates and Ph. D. scholars.
Author : Alejandro Medina
Publisher : Springer Science & Business Media
Page : 201 pages
File Size : 50,31 MB
Release : 2013-08-20
Category : Technology & Engineering
ISBN : 1447152891
Based on the simulations developed in research groups over the past years, Introduction to Quasi-dimensional Simulation of Spark Ignition Engines provides a compilation of the main ingredients necessary to build up a quasi-dimensional computer simulation scheme. Quasi-dimensional computer simulation of spark ignition engines is a powerful but affordable tool which obtains realistic estimations of a wide variety of variables for a simulated engine keeping insight the basic physical and chemical processes involved in the real evolution of an automotive engine. With low computational costs, it can optimize the design and operation of spark ignition engines as well as it allows to analyze cycle-to-cycle fluctuations. Including details about the structure of a complete simulation scheme, information about what kind of information can be obtained, and comparisons of the simulation results with experiments, Introduction to Quasi-dimensional Simulation of Spark Ignition Engines offers a thorough guide of this technique. Advanced undergraduates and postgraduates as well as researchers in government and industry in all areas related to applied physics and mechanical and automotive engineering can apply these tools to simulate cyclic variability, potentially leading to new design and control alternatives for lowering emissions and expanding the actual operation limits of spark ignition engines
Author : V. Ganesan
Publisher : Universities Press
Page : 226 pages
File Size : 37,7 MB
Release :
Category :
ISBN : 9788173712838
This book attempts to provide a simplified framework for the vast and complex map of technical material that exists on compression-ignition engines, and at the same time include sufficient details to convey the complexity of engine simulation. The emphasis here is on the thermodynamics, combustion physics and chemistry, heat transfer, and friction processes relevant to compression-ignition engines with simplifying assumpations.
Author :
Publisher :
Page : 324 pages
File Size : 11,36 MB
Release : 1985
Category : Astronautics
ISBN :
Author : Ripudaman Malhotra
Publisher : Springer Science & Business Media
Page : 628 pages
File Size : 48,87 MB
Release : 2012-12-12
Category : Technology & Engineering
ISBN : 146145722X
The word sustainability shares its root with sustenance. In the context of modern society, sustenance is inextricably linked to the use of energy. Fossil Energy provides an authoritative reference on all aspects of this key resource, which currently represents nearly 85% of global energy consumption. Gathering 16 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technology, the chapters provide comprehensive, yet concise coverage of fundamentals and current areas of research. Written by recognized authorities in the field, this volume represents an essential resource for scientists and engineers working on the development of energy resources, fossil or alternative, and reflects the essential role of energy supplies in supporting a sustainable future.
Author : Avinash Kumar Agarwal
Publisher : Springer
Page : 448 pages
File Size : 30,62 MB
Release : 2017-01-20
Category : Technology & Engineering
ISBN : 981103785X
This research monograph presents both fundamental science and applied innovations on several key and emerging technologies involving fossil and alternate fuel utilization in power and transport sectors from renowned experts in the field. Some of the topics covered include: autoignition in laminar and turbulent nonpremixed flames; Langevin simulation of turbulent combustion; lean blowout (LBO) prediction through symbolic time series analysis; lasers and optical diagnostics for next generation IC engine development; exergy destruction study on small DI diesel engine; and gasoline direct injection. The book includes a chapter on carbon sequestration and optimization of enhanced oil and gas recovery. The contents of this book will be useful to researchers and professionals working on all aspects on combustion.
Author : Avinash Kumar Agarwal
Publisher : Springer Nature
Page : 368 pages
File Size : 31,58 MB
Release : 2021-12-16
Category : Technology & Engineering
ISBN : 9811686181
This book focuses on the simulation and modeling of internal combustion engines. The contents include various aspects of diesel and gasoline engine modeling and simulation such as spray, combustion, ignition, in-cylinder phenomena, emissions, exhaust heat recovery. It also explored engine models and analysis of cylinder bore piston stresses and temperature effects. This book includes recent literature and focuses on current modeling and simulation trends for internal combustion engines. Readers will gain knowledge about engine process simulation and modeling, helpful for the development of efficient and emission-free engines. A few chapters highlight the review of state-of-the-art models for spray, combustion, and emissions, focusing on the theory, models, and their applications from an engine point of view. This volume would be of interest to professionals, post-graduate students involved in alternative fuels, IC engines, engine modeling and simulation, and environmental research.
Author : N. A. Chigier
Publisher : Elsevier
Page : 334 pages
File Size : 46,4 MB
Release : 2013-10-22
Category : Technology & Engineering
ISBN : 148318224X
Energy and Combustion Science is a collection of papers that covers advancement in the field of energy and combustion science. The materials presented in the book are organized thematically into parts. The text first covers the issues, concerns, problems of the contemporary combustion technology. The subsequent parts of the book cover various areas in combustions science, namely, pollution, gas, oil, coal, and engines. Most of the articles in the book are concerned with the byproduct of fuel combustion. The text will be of great use to students, researchers, and practitioners of disciplines that deal with the energy and combustion technology.
Author : Gordon Blair
Publisher : SAE International
Page : 656 pages
File Size : 12,56 MB
Release : 1996-02-01
Category : Technology & Engineering
ISBN : 0768025168
Design and Simulation of Two-Stroke Engines is a unique hands-on information source. The author, having designed and developed many two-stroke engines, offers practical and empirical assistance to the engine designer on many topics ranging from porting layout, to combustion chamber profile, to tuned exhaust pipes. The information presented extends from the most fundamental theory to pragmatic design, development, and experimental testing issues. Chapters cover: Introduction to the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modeling of Engines Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines and more
Author : P.L. Dhar
Publisher : Academic Press
Page : 618 pages
File Size : 22,42 MB
Release : 2016-10-25
Category : Technology & Engineering
ISBN : 0128094303
Thermal System Design and Simulation covers the fundamental analyses of thermal energy systems that enable users to effectively formulate their own simulation and optimal design procedures. This reference provides thorough guidance on how to formulate optimal design constraints and develop strategies to solve them with minimal computational effort. The book uniquely illustrates the methodology of combining information flow diagrams to simplify system simulation procedures needed in optimal design. It also includes a comprehensive presentation on dynamics of thermal systems and the control systems needed to ensure safe operation at varying loads. Designed to give readers the skills to develop their own customized software for simulating and designing thermal systems, this book is relevant for anyone interested in obtaining an advanced knowledge of thermal system analysis and design. - Contains detailed models of simulation for equipment in the most commonly used thermal engineering systems - Features illustrations for the methodology of using information flow diagrams to simplify system simulation procedures - Includes comprehensive global case studies of simulation and optimization of thermal systems
