Pushing the KIT 2 MW Coaxial-Cavity Short-Pulse Gyrotron Towards a DEMO Relevant Design


Book Description

Magnetic fusion is one approach to generate thermonuclear fusion power in an environmental friendly way. The Electron Cyclotron Resonance Heating is considered as the major concept for startup, heating and control of the fusion plasma. Megawatt-class gyrotrons generate the required microwave power. This work focuses on advanced key components and technologies for a DEMO relevant 2 MW gyrotron. One major focus is on the development of advanced Magnetron Injection Guns. Another focus is on the red




Energy-efficient, scalable and modular industrial microwave applicator for high temperature alkaline hydrolysis of PET


Book Description

Microwave-assisted alkaline hydrolysis of PET can be 20 times faster and at lower temperatures. This work presents a novel industrial microwave applicator at 2.45 GHz with homogeneous distribution to support this reaction, which allows an efficient and continuous operation. In addition, an innovative dielectric and calorimetric measurements setup is presented. Furthermore, the modelling of the reaction kinetics based on the measured dielectric parameters is presented.




New Type of sub-THz Oscillator and Amplifier Systems Based on Helical-Type Gyro-TWTs


Book Description

This work presents the development of a new sub-THz source for the generation of trains of coherent high-power ultra-short pulses at 263 GHz via passive mode-locking of two coupled helical gyro-TWTs. For the first time, it is shown that the operation of such passive mode-locked helical gyro-TWTs in the hard excitation regime is of particular importance to reach the optimal coherency of the generated pulses. This could be of particular interest for some new time-domain DNP-NMR methods.




A First 2 MW-Class (136)/170/204 GHz Multi-Frequency Gyrotron Pre-Prototype for DEMO: Design, Construction and Key Components Verification


Book Description

Ein Gyrotron wird in magnetisch eingeschlossenen Plasmaexperimenten für Heizung, Stromtrieb, Plasmastabilisierung und Plasmadiagnostik verwendet. In dieser Arbeit wird der erste Entwurf und Bau eines Mehrfrequenz-/Mehrzweck Pre-Prototyp Gyrotrons in koaxialer Technologie vorgestellt, das bei (136)/170/204 GHz mit einer Ausgangsleistung von 2 MW arbeitet. Dies ist der erste Schritt zum Betrieb bei Frequenzen bis zu 240 GHz unter Verwendung der Koaxialhohlraum-Gyrotrontechnologie. - A gyrotron is used in magnetically confined plasma experiments for heating, current drive, plasma stabilization and plasma diagnostics. This work presents the first design and construction of a multi-frequency / multi-purpose coaxial-cavity pre-prototype gyrotron operating at (136)/170/204 GHz with an output power of 2 MW. It is the first step towards operating frequencies up to 240 GHz using the coaxial-cavity gyrotron technology.




Automated Mode Recovery and Electronic Stability Control for Wendelstein 7-X Gyrotrons


Book Description

Magnetic confinement fusion relies on plasma heating and plasma control using gyrotron oscillators providing at megawatt power levels. The operational reliability decreases when operating at the performance limits due to increasing parasitic mode activity. This work demonstrates for the first time the automated, fast recovery of nominal gyrotron operation during a pulse by exploiting the hysteretic gyrotron behaviour after a mode switch being in use at the Wendelstein 7-X ECRH facility.




MultPhysics Modelling towards the Stabilization of PAN Fibers with Microwaves Based on Experimental Data


Book Description

High energy demand is one reason for high costs of carbon fibers. One option to decrease them is to use microwave heating instead of conventional heating. In this work, steps towards a microwave assisted process during the stabilization phase are presented. In-situ dielectric measurements are performed and a reaction kinetics model is setup in connection to the dielectric loss. This allows to calculate a stabilization degree and fiber temperatures leading to a basic process understanding.










Microwave Photonics


Book Description

Microwave photonics continues to see rapid growth. The integration of optical fiber and wireless networks has become a commercial reality and is becoming increasingly pervasive. Such hybrid technology will lead to many innovative applications, including backhaul solutions for mobile networks and ultrabroadband wireless networks that can provide users with very high bandwidth services. Microwave Photonics, Second Edition systematically introduces important technologies and applications in this emerging field. It also reviews recent advances in micro- and millimeter-wavelength and terahertz-frequency systems. The book features contributions by leading international researchers, many of whom are pioneers in the field. They examine wave generation, measurement, detection, control, and propagation in detail, as well as the devices and components that enable ultrawide-band and ultrafast transmission, switching, and signal processing. These devices and components include optical-controlled microwave devices, optical transmitters, receivers, switching devices, detectors, and modulators. The book explores the theory, techniques, and technologies that are fueling applications such as radio-over-fiber, injection-locked semiconductor lasers, and terahertz photonics. Throughout, the contributors share insights on overcoming current limitations and on potential developments. What’s New in This Edition Two new chapters, on fiber Bragg gratings for microwave photonics applications and ultrawide-band sub-THz photonic wireless links Updates throughout, reflecting advances in the field New illustrations in each chapter Fully illustrated with more than 300 figures and tables, this book offers a detailed, wide-ranging overview of the current state and future directions of this burgeoning technology.