Book Description
Algorithm for estimating volume of commodity flow not reported in Census public use tapes.
Author : Massachusetts Institute of Technology. Center for Transportation Studies
Publisher :
Page : 44 pages
File Size : 12,1 MB
Release : 1977
Category : Freight and freightage
ISBN :
Algorithm for estimating volume of commodity flow not reported in Census public use tapes.
Author : Yu Sheng Chiang
Publisher :
Page : 56 pages
File Size : 27,32 MB
Release : 1976
Category : Freight and freightage
ISBN :
Author : Massachusetts Institute of Technology. Urban Systems Laboratory
Publisher :
Page : 102 pages
File Size : 28,51 MB
Release : 1974
Category : Freight and freightage
ISBN :
Author : United States. Department of Transportation
Publisher :
Page : 504 pages
File Size : 49,22 MB
Release :
Category :
ISBN :
Author : Goangsung Jin
Publisher :
Page : 0 pages
File Size : 47,75 MB
Release : 2011
Category :
ISBN :
The increase in truck traffic on highways has brought many problems and challenges to transportation planning and traffic operation, including traffic congestion, transportation system deficiency (insufficient truck parking, etc.), safety, infrastructure deterioration, environmental impacts (air quality and noise), economic development, and so forth. Along with the increase in truck traffic, the need for developing a statewide truck freight demand model has grown so that a state can estimate truck traffic at any point on its highways. The most significant hurdle to including freight transportation in the transportation modeling process is that most of the demand forecasting methodologies currently available were developed for passenger trips, not freight trips. This type of modeling methodology usually makes an assumption that freight trips follow the same behavioral mechanism as passenger trips. In order to overcome the weakness of using a typical four-step demand forecasting modeling process, the concept of commodity flow models (CFMs) can be used to develop a truck freight flow model. It is widely accepted that focusing on the freights enables CFMs to capture more accurately the fundamental economic mechanisms that drive freight movements. The type of commodity being carried is one of the most important characteristics of truck movements, and it is sometimes a challenge to obtain such information from the carriers. Thus, lately, the integration of the freight flow modeling and land use modeling has emerged as an alternate tool to estimate freight movements than the previously developed models. In this study, county-level multiple regression models relating land use to commodity flow were developed using a geographical information system and statistics. Then, a statistical/mathematical statewide commodity flow distribution model was developed by using a physical friction factor (physical distance), a statistical friction factor (Euclidean distance), and economic factors (differences of population and difference of employment among the counties). The commodity flow distributed among truck traffic analysis zones (TTAZs) by the statewide commodity flow distribution model were converted to truck trips and the resulting truck trips were assigned to Utah's truck routes using the all-or-nothing assignment procedure of TransCAD and a genetic algorithm. Truck freight data from the US Census Bureau's Commodity Flow Surveys, which have become available to the public for free via the Internet, enabled the development of a commodity flow based statewide truck freight demand model. It was found that the integration of the freight flow and land use data could be a practical method for modeling tuck traffic demand on state-wide truck routes although the current level of data availability on commodity flow and land use data still constrains the full capability of this type of modeling.
Author :
Publisher :
Page : 218 pages
File Size : 45,6 MB
Release : 2009
Category : Commercial products
ISBN :
The paucity of available data was limiting studies of freight flow in Thailand. To overcome this problem, commodity flow survey (CFS) and comprehensive freight transportation by truck using roadside survey (RS) were launched to collect comprehensive freight flow data throughout the kingdom of Thailand. Since these two surveys were pioneering and due to budgetary limitations, the resulting data are still incomplete and must be adjusted. The need to produce a freight origin destination matrix using available data from CFS and RS led to the objectives of this research. This research has two main objectives. The first is to develop a methodology for combining CFS and RS. The second is to develop a method for filling gaps in the origin destination matrix based on the Adaptive Neuro Fuzzy Inference System (ANFIS) approach. The methodology to combine these two data sources was developed which uses the strengths of each method, the CFS distribution pattern and the RS marginal total. The first method is Trip Length Distribution Adjusting (TLDA), which uses adjustments to CFS trip length distribution to meet RS marginal total. The second method is Gravity Model Approach (GMA), which uses CFS friction functions to adjust RS data matrix. The method was calibrated using two difference sources of roadside survey. The results indicated that the adjusted volumes of the two data sources agreed despite being collected at different times and by different authors, and that the differences between the total adjusted volumes were quite small. It can therefore be concluded that the developed method can be used to adjust the data. For the second component, a model using BOX-COX transformation and Adaptive Neuro Fuzzy Inference system (ANFIS) was developed and verified against a convention gravity model. Two types of model, using convention gravity variables and using socio-economic variables, were developed. The results showed that the ANFIS model outperformed both the conventional gravity model and the BOX-COX model. These results proved the performance of the adaptive neuro fuzzy inference system for modeling complex system and its ability to model freight trip distribution.
Author : Keith M. Chase
Publisher : Transportation Research Board
Page : 90 pages
File Size : 31,51 MB
Release : 2013
Category : Transportation
ISBN : 0309129427
" TRB's second Strategic Highway Research Program (SHRP 2) Report S2-C20-RR-1: Freight Demand Modeling and Data Improvement documents the state of the practice for freight demand modeling. The report also explores the fundamental changes in freight modeling, and data and data collection that could help public and private sector decision-makers make better and more informed decisions. SHRP 2 Capacity Project C20, which produced Report S2-C20-RR-1, also produced the following items: A Freight Demand Modeling and Data Improvement Strategic Plan, which outlines seven strategic objectives that are designed to serve as the basis for future innovation in freight travel demand forecasting and data, and to guide both near- and long-term implementation: A speaker's kit, which is intended to be a "starter" set of materials for use in presenting the freight modeling and data improvement strategic plan to a group of interested professionals; and; A 2010 Innovations in Freight Demand Modeling and Data Symposium " -- publisher's description
Author : José Holguín-Veras
Publisher :
Page : 238 pages
File Size : 11,21 MB
Release : 2017
Category : Commodity control
ISBN : 9780309446198
Foreword: "NCFRP Research Report 37 provides policy makers with improved establishment-level models that estimate the freight trip generation (FTG), the number of vehicle trips produced and attracted at a given establishment; the freight production (FP), the amount of cargo produced by the establishment; and the service trip attraction (STA), the number of vehicle trips that arrive at the establishment to perform a service activity. These models, estimated with the best data available, provide tools to assess the various facets of the overall freight and service activity (FSA) that takes place in urban and metropolitan areas. The models will allow transportation practicitioners to conduct sound curb-management, proerply size loading and unloading areas, support traffic impact analyses, and improve transportation planning and management efforts."--Page v.
Author :
Publisher : Transportation Research Board
Page : 105 pages
File Size : 22,48 MB
Release : 2012
Category : Freight and freightage
ISBN : 0309258561
"TRB's National Cooperative Highway Research Program (NCHRP) Report 732: Methodologies to Estimate the Economic Impacts of Disruptions to the Goods Movement System describes the impacts of bottlenecks and interruptions to the flow of goods through the nation's major freight corridors and intermodal connectors, the dynamics of that flow in response to disruptions, and the full economic impact on public and private entities beyond just the critical infrastructure and the carriers that depend on that flow."--Publication information.
Author : César Augusto Quiroga
Publisher : Transportation Research Board
Page : 106 pages
File Size : 30,63 MB
Release : 2011
Category : Business & Economics
ISBN : 0309155231
At head of title: National Cooperative Freight Research Program.