A Study of Grain Boundary Shear in Creep of Aluminum
Author : John Robert Nadeau
Publisher :
Page : 64 pages
File Size : 38,35 MB
Release : 1953
Category : Aluminum
ISBN :
Author : John Robert Nadeau
Publisher :
Page : 64 pages
File Size : 38,35 MB
Release : 1953
Category : Aluminum
ISBN :
Author : Bernard Fazan
Publisher :
Page : 58 pages
File Size : 23,73 MB
Release : 1953
Category : Aluminum
ISBN :
Author : F. N. Rhines
Publisher :
Page : 56 pages
File Size : 11,81 MB
Release : 1955
Category : Metal crystals
ISBN :
The gliding of one metal crystal with respect o another parallel to their mutual grain boundary has been studied in pure aluminum bicrystals during isothermal creep at temperatures ranging from 200 to 650 degrees C under static stresses of 10 to 1,600 psi. The motion is spasmodic and begins with an induction period. Its direction is determined by that of the maximum resolved shearing stress in the plane of the grain boundary, but its rate depends as well upon the angle through which the active slip systems are bent as they cross the grain boundary. The overall gliding rate is a linear function of the cube root of time and bears and Arrhenius relationship to the temperature, and its logarithm is proportional to the stress, over small ranges of stress. Shearing occurs with a zone of finite thickness, which becomes thicker with time, increasing temperature, and increasing stress. The metal within this zone is composed of subgrains that rotate back and forth about an axis which is sometimes the octahedral axis of the parent crystal. Rupture, which is never intergranular, is preceded by a sudden increase in the rate of uniform extension in one of the crystals. The mechanism of grain-boundary gliding is described as a coordinated alternation of slip and recovery in a chain of subgrains along the grain boundary. This concept is employed to account both for the rate of primary creep and for the transition from primary to steady-state creep.
Author : R. Chang
Publisher :
Page : 50 pages
File Size : 39,57 MB
Release : 1961
Category : Aluminum oxide
ISBN :
Author : Arthur W. Mullendore
Publisher :
Page : 50 pages
File Size : 43,6 MB
Release : 1960
Category : Aluminum-magnesium alloys
ISBN :
Author : Frederick N. Rhines
Publisher :
Page : 40 pages
File Size : 29,62 MB
Release : 1952
Category : Aluminum crystals
ISBN :
Gliding of aluminum bicrystals along their mutual boundary was study during creep tests at 200 degrees to 650 degrees C and 1 to 100 psi. The direction of motion depends only upon the direction of maimum resloved shear stress, temperature, and degree of mismatch between orientations of the crystals. Gliding rate is cyclic and for each temperature there is a stress below which gliding does not occur. At low temperature and small orientation difference an induction period precedes gliding. Gliding operates in a relatively thick zone of crystaline metal on both sides of the boundary degenerate into bloxks that move with respect to each other, parallel to the tension axis, and that rotate about octahedral axes of the original crystal.
Author : United States. National Advisory Committee for Aeronautics
Publisher :
Page : 18 pages
File Size : 11,48 MB
Release : 1957
Category : Aeronautics
ISBN :
Author : Earl Curtis Vicars
Publisher :
Page : 82 pages
File Size : 42,20 MB
Release : 1952
Category : Metallurgy
ISBN :
Author :
Publisher :
Page : 1180 pages
File Size : 10,59 MB
Release : 1957
Category : Aeronautics
ISBN :
Author :
Publisher :
Page : 0 pages
File Size : 18,67 MB
Release : 2016
Category :
ISBN :