Masters Theses in the Pure and Applied Sciences


Book Description

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 39 (thesis year 1994) a total of 13,953 thesis titles from 21 Canadian and 159 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 39 reports theses submitted in 1994, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.




Thermodynamic Analysis of Combustion Engines


Book Description

Intended for a second course in thermodynamics. Explains in detail how the analysis of each engine system can be formulated for a computer program. Examines all present day engines which operate on the internal combustion system, including gas turbines, two-stroke and four-stroke internal combustion engines, both Otto and Diesel cycles, liquid propellant rockets, free piston engines, and powders in guns. Includes chemical equilibrium, explaining how equilibrium compositions in multireaction systems can be calculated. Uses SI units exclusively.




Dream Car


Book Description

Dream Car tells the story of entrepreneur Malcolm Bricklin’s fantastical 1970s-era Safety Vehicle-1 (SV1), audaciously launched during a tumultuous breakpoint in postwar history. The tale of the sexy-yet-safe SV1 reveals the influence of automobiles on ideas about the future, technology, entrepreneurship, risk, safety, showmanship, politics, sex, gender, business, and the state, as well as the history of the auto industry’s birth, decline, and rebirth. Written as an “open road,” the book invites readers to travel a narrative arc that unfolds chronologically and thematically. Dream Car’s seven chapters have been structured so that they can be read in any order, determined by whichever theme each reader finds most interesting. The book also includes a musical playlist of car songs from the era and songs about the SV1 itself.







Internal Combustion Engine Fundamentals


Book Description

This text, by a leading authority in the field, presents a fundamental and factual development of the science and engineering underlying the design of combustion engines and turbines. An extensive illustration program supports the concepts and theories discussed.







Engineering Study of the Rotary-Vee Engine Concept


Book Description

The applicable thermodynamic cycle and performance considerations when the rotary-vee mechanism is used as an internal combustion (I.C.) heat engine are reviewed. Included is a simplified kinematic analysis and studies of the effects of design parameters on the critical pressures, torques and parasitic losses. A discussion of the principal findings is presented. Willis, Edward A. and Bartrand, Timothy A. and Beard, John E. Glenn Research Center RTOP 505-62-51...




Technical Literature Abstracts


Book Description




Internal Combustion Engines


Book Description

Since the publication of the Second Edition in 2001, there have been considerable advances and developments in the field of internal combustion engines. These include the increased importance of biofuels, new internal combustion processes, more stringent emissions requirements and characterization, and more detailed engine performance modeling, instrumentation, and control. There have also been changes in the instructional methodologies used in the applied thermal sciences that require inclusion in a new edition. These methodologies suggest that an increased focus on applications, examples, problem-based learning, and computation will have a positive effect on learning of the material, both at the novice student, and practicing engineer level. This Third Edition mirrors its predecessor with additional tables, illustrations, photographs, examples, and problems/solutions. All of the software is ‘open source’, so that readers can see how the computations are performed. In addition to additional java applets, there is companion Matlab code, which has become a default computational tool in most mechanical engineering programs.




Design of Thermal Energy Systems


Book Description

Design of Thermal Energy Systems Pradip Majumdar, Northern Illinois University, USA A comprehensive introduction to the design and analysis of thermal energy systems Design of Thermal Energy Systems covers the fundamentals and applications in thermal energy systems and components, including conventional power generation and cooling systems, renewable energy systems, heat recovery systems, heat sinks and thermal management. Practical examples are used throughout and are drawn from solar energy systems, fuel cell and battery thermal management, electrical and electronics cooling, engine exhaust heat and emissions, and manufacturing processes. Recent research topics such as steady and unsteady state simulation and optimization methods are also included. Key features: Provides a comprehensive introduction to the design and analysis of thermal energy systems, covering fundamentals and applications. Includes a wide range of industrial application problems and worked out example problems. Applies thermal analysis techniques to generate design specification and ratings. Demonstrates how to design thermal systems and components to meet engineering specifications. Considers alternative options and allows for the estimation of cost and feasibility of thermal systems. Accompanied by a website including software for design and analysis, a solutions manual, and presentation files with PowerPoint slides. The book is essential reading for: practicing engineers in energy and power industries; consulting engineers in mechanical, electrical and chemical engineering; and senior undergraduate and graduate engineering students.