Accelerating Environmental Technology Implementation


Book Description

A Survey of Present Practices and New Directions and New Directions. This report summarizes the information gathered from a survey of representative members of the environmental community. The main purposes of the survey were to assess the present conditions affecting the introduction of new environmental products and innovative technologies into the marketplace, and to determine how the Environmental Technology Evaluation Center (EvTEC) can play an effective role in accelerating this process.




Accelerating Environmental Technology Implementation


Book Description

Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report presents the findings from a June 1997 Environmental Technology Needs Survey conducted by EvTEC. The survey was developed to help EvTEC gain a better understanding of present practices and procedures in evaluating new products and determine how EvTEC could best respond to the needs of all stakeholders in the environmental community. The survey contained general information questions as well as specialized questions for three groups: users and regulators of environmental products; entrepreneurs who invent, develop, or market new technologies and products; and research institutes and testing labs that carry out product and technology evaluations.




Environmental Technology and its Role in the Search for Urban Environmental Sustainability


Book Description

The aim of this thesis is to analyze the role that environmental technology plays in the solution of environmental problems in cities, and discuss models and conditions that can facilitate the processes of selection, implementation and use of environmental technologies in and by cities. The technological component is perhaps one of the most important characteristics of modern cities. The dependence of humans on technology is in most cases a given, something that is not ignored in the sustainability debate. The development and implementation of new, “better” technologies is however hindered by the inertia that modern societies have and the influence of the dominant systems (e.g. economic systems based on growth, extraction of natural resources and environmental disturbance). So-called environmental technologies are not always able to efficiently compete against other technologies that are embedded in societies by lock-in mechanisms, e.g. learning by doing and using, scale economies, subsidies, and network externalities. Even with the “right” technologies, an exclusively techno-centered approach to sustainability can result in other problems, and it might reduce the sustainability debate and the cities’ role in it to discussions of an administrative nature. The actual role of local actors and their agency must be also considered in the models and frameworks directed at understanding sustainability transition processes. It is thus important to analyze the dynamics of technology selection, implementation, use and diffusion in cities from a stakeholders’ perspective as well. Not only is the availability of technology of interest for understanding the impact it has on the environment, but also the intensity of its use. This has resulted in increased attention from politicians and scholars on the so-called global cities (e.g. London, New York, Tokyo), which are characterized by their intense use of e.g. transport, security and surveillance, and information and communication. Paradigmatic models of sustainability can however be contested when the role of local actors, power and agency are considered in detail and not isolated from the context. Some authors recognize the need to address what they call “ordinary cities”, since focusing on the cities’ comparative level of development (be it political, economic or technological) hinders the possibility of bidirectional learning. In the end, sustainability is a “collective good,” which means that it is in everyone’s interest to coordinate efforts and learn from the best practices, regardless of where they come from. This thesis focuses on “ordinary cities,” and promises to offer conclusions that can contribute to a better understanding of how societies can learn from each other and how environmental technologies can have deeper and better results when implemented in different contexts than the ones where they were developed. Two questions related to the process of environmental-technology adaptation are addressed in this thesis: How do technology adaptation processes for the solution of urban environmental problems take place in cities? And how do cities benefit from environmental technologies? It is found that environmental technology is not only seen as a solution to environmental problems in cities, but every day more as a component of strategies to attract attention and compete for resources in national and international markets. Cities have different adaptation and learning strategies. This means that technological solutions have to be flexible and adaptive to local conditions, and allow for vernacular knowledge and past experiences to enrich their performance by facilitating their connection to existing systems. Learning between cities is important and necessary for global sustainability transitions. When it comes to environmental technology, this process is facilitated by strong proof-of-concept projects. Such projects are not only expected to be able to show their technical ability to solve a problem, but must also offer contextual connections to the problems faced by interested cities or potential implementers.







Environmental Technology Verification Report for the Plasma Enhanced Melter


Book Description

Prepared by the Environmental Technology Evaluation Center (EvTEC), a service center of CERF/IIEC. This Technology Verification report describes the nature and scope of the environmental evaluation of the performance of the Plasma Enhanced Melter? (PEM?) system for waste treatment. The evaluation was conducted through a cooperative program established in 1998 between the Washington State Department of Ecology, Integrated Environmental Technology Inc., Allied Technology Group, and the Civil Engineering Research Foundation. The goal of this report is to provide potential users and purchasers of the PEM? system with information they need to make more informed decisions regarding the performance of PEM? as an equivalent or alternative to incineration for treating hazardous waste.




Environmental Technical Verification Report for Ammonia Recovery Process


Book Description

Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report describes the nature and scope of an environmental evaluation of ThermoEnergy Corporation's Ammonia Recovery Process (ARP) System, a method for recycling ammonia in wastewater. The data in this report were collected over a three-month pilot study.ØTests found that the ARP system is capable of removing 75?99% of the ammonia in the waste stream in a domestic wastewater treatment plant. The ARP System uses a series of absorption, evaporation, and crystallization steps to convert ammonia in wastewater into a commercial fertilizer, ammonium sulfate. The evaluation results clearly indicate that the ARP process is capable of achieving significant ammonia reduction under a range of environmental conditions




Environmental Technology Initiative


Book Description




Bioremediation in the Highway Environment


Book Description

Prepared by the Environmental Technology Evaluation Center (EvTEC) and the Highway Innovative Technology Evaluation Center (HITEC), CERF Service Centers. This report provides an update on technology and is intended to assist the Federal Highway Administration's Priority Technology Program (PTP) and departments of transportation in all 50 states. It identifies barriers that hinder the widespread use of bioremediation in the highway environment, as well as methods to overcome these barriers. The evaluation is based on design, construction, performance, and quality assurance information outlined in the HITEC and EvTEC Protocols. The three case studies examine PTP projects in Alabama, Indiana, and Mississippi.




Accelerating Decarbonization in the United States


Book Description

Addressing climate change is essential and possible, and it offers a host of benefits - from better public health to new economic opportunities. The United States has a historic opportunity to lead the way in decarbonization by transforming its current energy system to one with net-zero emissions of carbon dioxide. Recent legislation has set the nation on the path to reach its goal of net zero by 2050 in order to avoid the worst consequences of climate change. However, even if implemented as designed, current policy will get the United States only part of the way to its net-zero goal. Accelerating Decarbonization in the United States provides a comprehensive set of actionable recommendations to help policymakers achieve a just and equitable energy transition over the next decade and beyond, including policy, technology, and societal dimensions. This report addresses federal and subnational policy needs to overcome implementation barriers and gaps with a focus on energy justice, workforce development, public health, and public engagement. The report also presents a suite of recommendations for the electricity, transportation, built environment, industrial, fossil fuels, land use, and finance sectors.




Evaluation of SSET: The Sewer Scanner and Evaluation Technology


Book Description

Prepared by CEITEC, a CERF innovation center serving the engineering and construction industries. This report describes an evaluation of Sewer Scanner and Evaluation Technology (SSET) designed to determine the basic capabilities and limitations of SSET for use as a technicallly viable technology for inspecting sewer pipes. The evaluation focused on the performance and in-service demonstration of SSET. The technology involves digital scanning to obtain a flat, "unfolded" image of the pipeline's interior. This evaluation includes field demonstrations performed at 13 municipal public works agencies throughout North America. Subsequent to this evaluation, SSET was modified to include a fisheye lens camera and fiber optic gyroscope, which replaced the rotating mechanical scanner and mechanical gyroscope. The evaluation confirmed the operability of SSET and its viability in data presentation. A degree of enhancement was recognized with additional features, most notably the ability to produce a digital report of the sewer pipe, to identify vertical deflection in pipes, and to deliver easily comprehensible and manageable results. The evaluation also revealed that SSET cannot reproduce all the features typically available from closed-circuit television (CCTV) inspection. Such features include the ability to clearly see corrosion, infiltration rates, and ovality. The limitations in applicability were determined and an economic comparison of SSET and CCTV is provided.