Aerodynamics of a Lifting System in Extreme Ground Effect


Book Description

This book is dedicated to the memory of a distinguished Russian engineer, Rostislav E. Alexeyev, who was the first in the world to develop the largest ground effect machine - Ekranoplan. One of Alexeyev's design concepts with the aerodynamic configuration of a jlying wing can be seen on the front page. The book presents a description of a mathematical model of flow past a lifting system, performing steady and unsteady motions in close proximity to the underlying solid surface (ground). This case is interesting for practical purposes because both the aerodynamic and the economic efficiency of the system near the ground are most pronounced. Use of the method of matched asymptotic expansions enables closed form solutions for the aerodynamic characteristics of the wings-in-ground effect. These can be used for design, identification, and processing of experimental data in the course of developing ground effect vehicles. The term extreme ground effect, widely used through out the book, is associated with very small relative ground clearances of the order of 10% or less. The theory of a lifting surface, moving in immediate proximity to the ground, represents one of the few limiting cases that can be treated analytically. The author would like to acknowledge that this work has been influenced by the ideas of Professor Sheila E. Widnall, who was the first to apply the matched asymptotics techniques to treat lifting flows with the ground effect. Saint Petersburg, Russia February 2000 Kirill V. Rozhdestvensky Contents 1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .




WIG Craft and Ekranoplan


Book Description

In the last half-century, high-speed water transportation has developed rapidly. Novel high-performance marine vehicles, such as the air cushion vehicle (ACV), surface effect ship (SES), high-speed monohull craft (MHC), catamaran (CAT), hydrofoil craft (HYC), wave-piercing craft (WPC) and small water area twin hull craft (SWATH) have all developed as concepts, achieving varying degrees of commercial and military success. Prototype ACV and SES have achieved speeds of 100 knots in at calm con- tions; however, the normal cruising speed for commercial operations has remained around 35–50 knots. This is partly due to increased drag in an average coastal s- way where such craft operate services and partly due to limitations of the propulsion systems for such craft. Water jets and water propellers face limitations due to c- itation at high speed, for example. SWATH are designed for reduced motions in a seaway, but the hull form is not a low drag form suitable for high-speed operation. So that seems to lead to a problem – maintain water contact and either water propulsion systems run out of power or craft motions and speed loss are a problem in higher seastates. The only way to higher speed would appear to be to disconnect completely from the water surface. You, the reader, might respond with a question about racing hydroplanes, which manage speeds of above 200 kph. Yes, true, but the power-to-weight ratio is extremely high on such racing machines and not economic if translated into a useful commercial vessel.




Aerodynamics of Road Vehicles


Book Description

Aerodynamics of Road Vehicles details the aerodynamics of passenger cars, commercial vehicles, sports cars, and race cars; their external flow field; as well as their internal flow field. The book, after giving an introduction to automobile aerodynamics and some fundamentals of fluid mechanics, covers topics such as the performance and aerodynamics of different kinds of vehicles, as well as test techniques for their aerodynamics. The book also covers other concepts related to automobiles such as cooling systems and ventilations for vehicles. The text is recommended for mechanical engineers and phycisists in the automobile industry who would like to understand more about aerodynamics of motor vehicles and its importance on the field of road safety and automobile production.







Aerodynamics of Wings and Bodies


Book Description

This excellent, innovative reference offers a wealth of useful information and a solid background in the fundamentals of aerodynamics. Fluid mechanics, constant density inviscid flow, singular perturbation problems, viscosity, thin-wing and slender body theories, drag minimalization, and other essentials are addressed in a lively, literate manner and accompanied by diagrams.




Introduction to Aircraft Flight Mechanics


Book Description

Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.




HELICOPTER AERODYNAMICS


Book Description

This book is developed to serve as a concise text for a course on helicopter aerodynamics at the introductory level. It introduces to the rotary-wing aerodynamics, with applications to helicopters, and application of the relevant principles to the aerodynamic design of a helicopter rotor and its blades. The basic aim of this book is to make a complete text covering both the basic and applied aspects of theory of rotary wing flying machine for students, engineers, and applied physicists. The philosophy followed in this book is that the subject of helicopter aerodynamics is covered combining the theoretical analysis, physical features and the application aspects. Considerable number of solved examples and exercise problems with answers are coined for this book. This book will cater to the requirement of numerical problems on helicopter flight performance, which is required for the students of aeronautical/aerospace engineering.. SALIENT FEATURES • To provide an introductory treatment of the aerodynamic theory of rotary-wing aircraft • To study the fundamentals of rotor aerodynamics for rotorcraft in hovering flight, axial flight, and forward flight modes • To perform blade element analysis, investigate rotating blade motion, and quantify basic helicopter performance




High-Lift Aerodynamics


Book Description

This book presents a detailed look at high-lift aerodynamics, which deals with the aerodynamic behavior of lift augmentation means from various approaches. After an introductory chapter, the book discusses the physical limits of lift generation, giving the lift generation potential. It then explains what is needed for an aircraft to fly safely by analyzing the high-lift-related requirements for certifying an aircraft. Aircraft needs are also analyzed to improve performance during takeoff, approach, and landing. The book discusses in detail the applied means to increase the lift coefficient by either passive and active high-lift systems. It includes slotless and slotted high-lift flaps, active and passive vortex generating devices, boundary and circulation control, and powered lift. Describing methods that are used to evaluate and design high-lift systems in an aerodynamic sense, the book briefly covers numerical as well as experimental simulation methods. It also includes a chapter on the aerodynamic design of high-lift systems. FEATURES Provides an understanding of the physics of flight during takeoff and landing from aerodynamics to flight performance and from simulation to design Discusses the physical limits of lift generation, giving the lift generation potential Concentrates on the specifics of high-lift aerodynamics to provide a first insight Analyzes aircraft needs to improve performance during takeoff, approach, and landing Focuses on civil transport aircraft applications but also includes the associated physics that apply to all aircraft This book is intended for graduate students in aerospace programs studying advanced aerodynamics and aircraft design. It also serves as a professional reference for practicing aerospace and mechanical engineers who are working on aircraft design issues related to takeoff and landing.




Aerodynamics of V/STOL Flight


Book Description

An extremely practical overview of V/STOL (vertical/short takeoff and landing) aerodynamics, this volume offers a presentation of general theoretical and applied aerodynamic principles, covering propeller and helicopter rotor theory for both the static and forward flight cases. Both a text for students and a reference for professionals, the book can be used for advanced undergraduate or graduate courses. Numerous detailed figures, plus exercises. 1967 edition. Preface. Appendix. Index.




Theoretical and Experimental Aerodynamics


Book Description

This book is intended as a text for undergraduate and graduate courses in aerodynamics, typically offered to students of aerospace and mechanical engineering programs. It covers all aspects of aerodynamics. The book begins with a description of the standard atmosphere and basic concepts, then moves on to cover the equations and mathematical models used to describe and characterize flow fields, as well as their thermodynamic aspects and applications. Specific emphasis is placed on the relation between concepts and their use in aircraft design. Additional topics of interest to the reader are presented in the Appendix, which draws on the teachings provided in the text. The book is written in an easy to understand manner, with pedagogical aids such as chapter overviews, summaries, and descriptive and objective questions to help students evaluate their progress. Atmospheric and gas tables are provided to facilitate problem solving. Lastly, a detailed bibliography is included at the end of each chapter to provide students with further resources. The book can also be used as a text for professional development courses in aerodynamics.