Reservoir Engineering


Book Description

Part 1. Conceptual and planning practice for reservoirs - Introduction and philosophy of approach - Objectives - Selection of potential dam sites and conceptual schemes - Investigation of selected sites and geological studies - Hydraulic studies - Hydrological studies - Spillways - River diversion during construction - Seismic loading Part 2. Development practice for reservoirs - Water conduits for reservoirs - Tunnelling problems and excavation of shafts - Electro-mechanical equipment and controls - Environmental considerations - Costs and benefits - Efficient management for irrigation - Small hydropower - Safety and inspection of reservoirs - Operation and maintenance, monitoring and inspection




Hydraulic Structures


Book Description

Now includes Worked Examples for lectutrers in a companion pdf! The fourth edition of this volume presents design principles and practical guidance for key hydraulic structures. Fully revised and updated, this new edition contains enhanced texts and sections on: environmental issues and the World Commission on Dams partially saturated soils, small amenity dams, tailing dams, upstream dam face protection and the rehabilitation of embankment dams RCC dams and the upgrading of masonry and concrete dams flow over stepped spillways and scour in plunge pools cavitation, aeration and vibration of gates risk analysis and contingency planning in dam safety small hydroelectric power development and tidal and wave power wave statistics, pipeline stability, wave–structure interaction and coastal modelling computational models in hydraulic engineering. The book's key topics are explored in two parts - dam engineering and other hydraulic structures – and the text concludes with a chapter on models in hydraulic engineering. Worked numerical examples supplement the main text and extensive lists of references conclude each chapter. Hydraulic Structures provides advanced students with a solid foundation in the subject and is a useful reference source for researchers, designers and other professionals.




Dams 2000


Book Description

- Developments in reservoir hydrology - Innovation in hydraulic structures - Risk and reservoir safety - Environmental implications: benefit and disbenefits - Lessons learned from overseas experience - Investigations and remedial works to extend asset life




Interim Guide to Quantitative Risk Assessment for UK Reservoirs


Book Description

"This interim guide to quantitative risk assessment for UK reservoirs provides a tool for the management of reservoir safety by experienced dam professionals. It comprises a screening level assessment of the risk of failure of a dam, i.e. the uncontrolled sudden large release of water from the reservoir it retains." "The guide is in the form of a Microsoft Excel workbook with proforma calculations, and accompanying text. It is intended to form part of either a periodic safety review or a portfolio risk assessment, where application of this guide identifies potential concerns a more detailed assessment is likely to be appropriate."--Résumé de l'éditeur.




Hydraulic Structures, Third Edition


Book Description

Hydraulic Structures demonstrates to the advanced undergraduate student the design of hydraulic structures in practice. It does this by explaining dam engineering, the design and construction of embankments, dam outlet works and pumping stations.




An Engineering Guide to the Safety of Embankment Dams in the United Kingdom


Book Description

A guide for engineers and others responsible for the safety of embankment dams. It includes a brief history of UK dams, legal requirements, design, construction methods and materials, procedures and/or checklists for surveillance and investigation, instrumentation and monitoring, remedial works and alterations, and rapid draw-down.




Geotechnical Engineering of Dams, 2nd Edition


Book Description

Geotechnical Engineering of Dams, 2nd edition provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The main emphasis of this work is on embankment dams, but much of the text, particularly those parts related to geology, can be used for concrete gravity and arch dams. All phases of investigation, design and construction are covered. Detailed descriptions are given from the initial site assessment and site investigation program through to the preliminary and detailed design phases and, ultimately, the construction phase. The assessment of existing dams, including the analysis of risks posed by those dams, is also discussed. This wholly revised and significantly expanded 2nd edition includes a lengthy new appendix on the assessment of the likelihood of failure of dams by internal erosion and piping. This valuable source on dam engineering incorporates the 200+ years of collective experience of the authors in the subject area. Design methods are presented in combination with their theoretical basis, to enable the reader to develop a proper understanding of the possibilities and limitations of a method. For its practical, well-founded approach, this work can serve as a useful guide for professional dam engineers and engineering geologists and as a textbook for university students.




ICE Manual of Geotechnical Engineering Volume 2


Book Description

ICE Manual of Geotechnical Engineering, Second edition brings together an exceptional breadth of material to provide a definitive reference on geotechnical engineering solutions. Written and edited by leading specialists, each chapter provides contemporary guidance and best practice knowledge for civil and structural engineers in the field.




Water Resources and Reservoir Engineering


Book Description

This volume explores the current issues and recent international developments in reservoir planning and operation, design and construction, monitoring and maintenance. In the light of the recent climatic changes which have seen a reduction in rainfall and resulted in water shortages, a number of pertinent subjects are examined in detail, for example the provision of new resources, evaluation of optimal operating policies, review of water supply options, sedimentation effects, the environmental aspects and the economic viability of reservoirs.




Engineering of Glacial Deposits


Book Description

At some time 30% of the world’s land mass was covered by glaciers leaving substantial deposits of glacial soils under major conurbations in Europe, North and South America, New Zealand, Europe and Russia. For instance, 60% of the UK has been affected, leaving significant glacial deposits under major conurbations where two thirds of the population live. Glacial soils are composite soils with significant variations in composition and properties and are recognised as challenging soils to deal with. Understanding the environment in which they were formed and how this affects their behaviour are critical because they do not always conform to classic theories of soil mechanics. This book is aimed at designers and contractors working in the construction and extractive industries to help them mitigate construction hazards on, with or in glacial deposits. These soils increase risks to critical infrastructure which, in the UK includes the majority of the road and rail network, coastal defences such as the fastest eroding coastline in Europe and most of the water supply reservoirs. It brings together many years of experience of research into the behaviour of glacial deposits drawing upon published and unpublished case studies from industry. It draws on recent developments in understanding of the geological processes and the impact they have upon the engineering properties, construction processes and performance of geotechnical structures. Unlike other books on glaciation it brings together all the relevant disciplines in earth sciences and engineering to make it directly relevant to the construction industry.