Author : Linbing Wang
Publisher :
Page : 464 pages
File Size : 31,43 MB
Release : 1998
Category : Granular materials
ISBN :
Author : Jun Otani
Publisher : CRC Press
Page : 402 pages
File Size : 11,1 MB
Release : 2004-10-06
Category : Technology & Engineering
ISBN : 9781439834299
X-ray Computed Tomography (CT) scanning has been widely used for medical diagnosis. This technique is now attracting increasing interest as a tool in non-destructive testing in engineering. This book reports the early results of research into this application, with particular reference to deformation and failure of geomaterials. Presenting papers of the International Workshop on X-CT for Geomaterials at Kumamoto, Japan in 2003. The book is intended for researchers and professionals in the fields of geotechnical engineering, soil, rock and concrete engineering, and geology.
Author :
Publisher :
Page : 838 pages
File Size : 33,68 MB
Release : 1999
Category : Air travel
ISBN :
Author : Association of Asphalt Paving Technologists
Publisher :
Page : 936 pages
File Size : 19,34 MB
Release : 2004
Category : Pavements, Asphalt
ISBN :
Author : Pasquale Giovine
Publisher : Birkhäuser
Page : 280 pages
File Size : 31,69 MB
Release : 2020-11-10
Category : Mathematics
ISBN : 9783030492663
This contributed volume provides an up-to-date overview of the mechanics of granular materials, ranging from sparse media to soils. With chapters exploring state-of-the-art theoretical, experimental, and applied trends in the study of granular matter in various states, readers will be motivated to learn about the current challenges and potential avenues of exploration in this active area of research. Including a variety of perspectives, this volume will be a valuable reference for audiences in a number of fields. Specific topics covered include: X-ray tomography techniques for analyzing sand Evaluation of effective stress in unsaturated soils Hyper-plasticity Wave propagation in granular systems Partly saturated porous media Multi-scale approaches to the dynamics of sparse media Views on Microstructures in Granular Materials is an ideal resource for PhD students and researchers in applied mathematics, solid-state physics, civil engineering, and mechanical engineering.
Author : Linbing Wang
Publisher : McGraw Hill Professional
Page : 481 pages
File Size : 21,19 MB
Release : 2010-10-08
Category : Technology & Engineering
ISBN : 0071640975
A State-of-the-Art Guide to the Mechanics of Asphalt Concrete Mechanics of Asphalt systematically covers both the fundamentals and most recent developments in applying rational mechanics, microstructure characterization methods, and numerical tools to understand the behavior of asphalt concrete (AC). The book describes the essential mathematics, mechanics, and numerical techniques required for comprehending advanced modeling and simulation of asphalt materials and asphalt pavements. Filled with detailed illustrations, this authoritative volume provides rational mechanisms to guide the development of best practices in mix design, construction methods, and performance evaluation of asphalt concrete. Mechanics of Asphalt covers: Fundamentals for mathematics and continuum mechanics Mechanical properties of constituents, including binder, aggregates, mastics, and mixtures Microstructure characterization Experimental methods to characterize the heterogeneous strain field Mixture theory and micromechanics applications Fundamentals of phenomenological models Multiscale modeling and moisture damage Models for asphalt concrete, including viscoplasticity, viscoplasticity with damage, disturbed state mechanics model, and fatigue failure criteria Finite element method, boundary element method, and discrete element method Digital specimen and digital test-integration of microstructure and simulation Simulation of asphalt compaction Characterization and modeling of anisotropic properties of asphalt concrete
Author : Benjamin K. Cook
Publisher :
Page : 448 pages
File Size : 32,76 MB
Release : 2002
Category : Science
ISBN :
Proceedings of the Third International Conference on Discrete Element Methods, held in Santa Fe, New Mexico on September 23-25, 2002. This Geotechnical Special Publication contains 72 technical papers on discrete element methods (DEM), a suite of numerical techniques developed to model granular materials, rock, and other discontinua at the grain scale. Topics include: DEM formulation and implementation approaches, coupled methods, experimental validation, and techniques, including three-dimensional particle representations, efficient contact detection algorithms, particle packing schemes, and code design. Coupled methods include approaches to linking solid continuum and fluid models with DEM to simulate multiscale and multiphase phenomena. Applications include fundamental investigations of granular mechanics; micromechanical studies of powder, soil, and rock behavior; and large-scale modeling of geotechnical, material processing, mining, and petroleum engineering problems.
Author : F. C. Campbell
Publisher : ASM International
Page : 699 pages
File Size : 10,47 MB
Release : 2012-01-01
Category : Technology & Engineering
ISBN : 1615039767
"This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.
Author : J. F. Lancaster
Publisher : Springer Science & Business Media
Page : 267 pages
File Size : 48,50 MB
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 940109506X
This book is intended, like its predecessor (The metallurgy of welding, brazing and soldering), to provide a textbook for undergraduate and postgraduate students concerned with welding, and for candidates taking the Welding Institute examinations. At the same time, it may prove useful to practising engineers, metallurgists and welding engineers in that it offers a resume of information on welding metallurgy together with some material on the engineering problems associated with welding such as reliability and risk analysis. In certain areas there have been developments that necessitated complete re-writing of the previous text. Thanks to the author's colleagues in Study Group 212 of the International Institute of Welding, understanding of mass flow in fusion welding has been radically transformed. Knowledge of the metallurgy of carbon and ferritic alloy steel, as applied to welding, has continued to advance at a rapid pace, while the literature on fracture mechanics accumulates at an even greater rate. In other areas, the welding of non-ferrous metals for example, there is little change to report over the last decade, and the original text of the book is only slightly modified. In those fields where there has been significant advance, the subject has become more quantitative and the standard of math ematics required for a proper understanding has been raised.
Author : C. Barry Carter
Publisher : Springer
Page : 543 pages
File Size : 44,32 MB
Release : 2016-08-24
Category : Technology & Engineering
ISBN : 3319266519
This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
