Advanced Manufacturing Technologies and Workforce Development


Book Description

This study examines the relationship between organizational performance, advanced manufacturing technologies and workforce development activities. In response to domestic and international competitive pressures, manufacturers are making increasing expenditures in both labor and technology. Both corporate and government surveys report that billions of dollars a year are spent for worker training and new technology by U.S. manufacturers. Despite these expenditures, little empirical evidence exists about the relationship between worker development activities and advanced technologies or the organizational outcomes from their combined use. In this study, multiple workforce development activities and advanced technology were defined and compared to several types of organizational performance at a variety of manufacturing plants in the Midwest. Human resource managers completed surveys that assessed areas of worker development, technology, environment and technology-driven workplace needs. Results indicate modest support for the relationship between technology, workforce development and organizational performance. Strong support, however, was found for the relationship between relational and skill needs due to changes in technology and the plant emphasis on process and individual worker development. This suggest that managerial perceptions regarding workplace changes from technology may be amore important factor than the technology itself in determining the type of workforce development activities provided. In addition, findings supported the use of multiple workforce development activities.




Advanced Manufacturing


Book Description

How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.




Workforce Education


Book Description

A roadmap for how we can rebuild America's working class by transforming workforce education and training. The American dream promised that if you worked hard, you could move up, with well-paying working-class jobs providing a gateway to an ever-growing middle class. Today, however, we have increasing inequality, not economic convergence. Technological advances are putting quality jobs out of reach for workers who lack the proper skills and training. In Workforce Education, William Bonvillian and Sanjay Sarma offer a roadmap for rebuilding America's working class. They argue that we need to train more workers more quickly, and they describe innovative methods of workforce education that are being developed across the country.




Sustainable Green Development and Manufacturing Performance through Modern Production Techniques


Book Description

Various Multiple Criteria Decision-Making (MCDM) techniques in one book: 13 MCDM techniques have been applied, namely, WSM, WPM, WASPAS, GRA, SMART, CRITIC, ENTROPY, EDAS, MOORA, AHP, TOPSIS, VIKOR, and new tools: MDEMATEL, Fuzzy MDEMATEL, Modified Fuzzy TOPSIS and Modified Fuzzy VIKOR. To date, no other book possesses this many tools. Various quantitative techniques: Different quantitative techniques have been applied, namely, Cronbach alpha, Chi-square and ANOVA (for demographic analysis), Percent Point Score and Central Tendency (response analysis), Factor Analysis, Correlation and Regression. To date, no other book possesses this many tools. Interpretive Structural Modelling: ISM has been applied for verifying MCDM results through MICMAC analysis and ISM model thus paving the way for model through SEM. Structural Equation Modelling: SEM using AMOS in PASW has been applied for model development. New MCDM techniques developed: In the process during qualitative analysis, new tools have been developed and their results have been compared with other existing MCDM tools and the results are encouraging. The new techniques are MDEMATEL, Fuzzy MDEMATEL, Modified Fuzzy TOPSIS and Modified Fuzzy VIKOR. Qualitative Model Developed: As the title says, Sustainable Green Development and Manufacturing Performance through Modern Production Techniques. It is a need-of-the-hour topic, as industries must maintain their performance (sustainable development) and, while sustaining, they have to keep in mind green issues (that is, environment-related issues, especially during the COVID-19 pandemic) and adopt advanced manufacturing and maintenance techniques. A model for this has been developed which will be helpful to both academicians and industrialists. Real-time Case Studies: Case studies in two industries of differing origins, different manufacturing sectors, different products, and comparing their units in the country of their origin and India. Dr. Chandan Deep Singh is an assistant professor in the Department of Mechanical Engineering, Punjabi University, Patiala, Punjab (India). He is a co-author of Adolescents, Family and Consumer Behaviour (Routledge, 2020) and of Manufacturing Competency and Strategic Success in the Automobile Industry (CRC Press, 2019). Dr. Harleen Kaur is a manager (HR) at DELBREC Industries, Pvt. Ltd., Chandigarh. She co-authored Adolescents, Family and Consumer Behaviour (Routledge, 2020).







Advanced Manufacturing


Book Description

How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.




U-M Computing News


Book Description




Securing Advanced Manufacturing in the United States


Book Description

The Manufacturing USA initiative seeks to reinforce U.S.-based advanced manufacturing through partnerships among industry, academia, and government. Started in 2012 and established with bipartisan support by the Revitalize American Manufacturing and Innovation Act of 2014, the initiative envisages a nationwide network of research centers for manufacturing innovation. As of May 2017, 14 manufacturing innovation institutes had been established to facilitate the movement of early-stage research into proven capabilities ready for adoption by U.S. manufacturers. To better understand the role and experiences of the Manufacturing USA institutes to date, a committee of the Innovation Policy Forum of the National Academies of Sciences, Engineering, and Medicine convened a workshop on May 23, 2017 drawing together institute directors and manufacturing policy experts along with leaders from industry, academia, and government. Participants addressed the role of the manufacturing institutes in increasing advanced manufacturing in the United States, examined selected foreign programs designed to support advanced manufacturing, and reviewed recent assessments of existing institutes. This publication summarizes the presentations and discussions from the workshop.







Federal Register


Book Description