Experimental Study of a Three-Dimensional Shear-Driven Turbulent Boundary Layer with Streamwise Adverse Pressure Gradient


Book Description

The effects of a strong adverse pressure gradient on a three-dimensional turbulent boundary layer are studied in an axisymmetric spinning cylinder geometry. Velocity measurements made with a three-component laser Doppler velocimeter include all three mean flow components, all six Reynolds stress components, and all ten triple-product correlations. Reynolds stress diminishes as the flow becomes three-dimensional. Lower levels of shear stress were seen to persist under adverse pressure gradient conditions. This low level of stress was seen to roughly correlate with the magnitude of cross-flow (relative to free stream flow) for this experiment as well as most of the other experiments in the literature. Variations in pressure gradient do not appear to alter this correlation. For this reason, it is hypothesized that a three-dimensional boundary layer is more prone to separate than a two-dimensional boundary layer, although it could not be directly shown here. None of the computations performed with either a Prandtl mixing length, k-epsilon, or a Launder-Reece-Rodi full Reynolds-stress model were able to predict the reduction in Reynolds stress. Driver, David M. and Johnston, James P. Ames Research Center NASA-TM-102211, A-89104, NAS 1.15:102211, NONP-NASA-SUPPL-CD-ROM-93-159790 RTOP 505-60-11...







Experimental Studies in Three-dimensional Turbulent Boundary Layers


Book Description

The various methods for measurement of the six components of the turbulence stress tensor are reviewed, and some of the data on the turbulent shear stress vector are presented to demonstrate the validity of current ideas for.