An Introduction to Metal Building, Exterior Insulation and Roofing Systems


Book Description

Introductory technical guidance for civil engineers, architectural engineers, structural engineers and construction managers interested in design and construction of metal buildings and exterior insulation and roofing systems. Here is what is discussed: 1. METAL BUILDING SYSTEMS 2. EXTERIOR INSULATION FINISH SYSTEMS (EIFS) 3. ROOFING SYSTEMS 4. GLOSSARY.




An Introduction to Roofing Systems for Professional Engineers


Book Description

Introductory technical guidance for professional engineers, architects and construction managers interested in roofing systems. Here is what is discussed: 1. STARTING POINTS FOR ROOF SYSTEM SELECTION, 2. SELECTION CONSIDERATIONS FOR STEEP ROOFING SYSTEMS, 3. SELECTION CONSIDERATIONS FOR LOW-SLOPE (MEMBRANE) ROOFING, 4. RE-ROOFING AND RE-COVERING, 5. ENVIRONMENTAL ISSUES, 6. DETAILED INFORMATION, 7. USING PRINCIPAL DESIGN CONSIDERATIONS TO REDUCE THE NUMBER OFPOSSIBLE ROOF SYSTEMS, 8. CONSIDERATIONS WHEN SPECIFYING LOW-SLOPE (HYDROSTATIC) MEMBRANE ROOFING, 9. PRINCIPAL CONSIDERATIONS WHEN SPECIFYING STEEP-SLOPE (WATERSHEDDING) ROOFING, 10. ADDITIONAL CRITERIA AND DISCUSSION.




Metal Building Systems Design and Specifications 2/E


Book Description

* Reflects recent changes in the model building codes and in the MBMA (Metal Building Manual Association) manual * New review questions after each chapter * Revised data on insulation necessary to meet the new energy codes * New material on renovations of primary frames, secondary members, roofing, and walls




An Introduction to Glass, Metal, and Masonry Building Wall Systems for Professional Engineers


Book Description

Introductory technical guidance for professional engineers and construction managers interested in glass, metal and masonry building wall systems for buildings. Here is what is discussed: 1. GLASS AND METAL CURTAIN WALLS, 2. MASONRY WALL SYSTEMS.




An Introduction to Airfield and Airport Engineering for Professional Engineers


Book Description

Introductory technical guidance for professional engineers and construction managers interested in design and construction of airfields and airports. Here is what is discussed: 1. AIRFIELD DRAINAGE, 2. AIRCRAFT HANGARS, 3. PASSENGER TERMINALS, 4. RUNWAYS, 5. AIR TRAFFIC CONTROL FACILITIES, 6. CONTROL TOWER SITING.




An Introduction to Building Design for Cold Regions for Professional Engineers


Book Description

Introductory technical guidance for professional engineers, architects and construction managers interested in design and construction of buildings in cold and arctic regions. Here is what is discussed: 1. GENERAL 2. TYPES OF CONSTRUCTION, 3. ROOFING, 4. ROOF SLOPE, 5. EXTERIOR PAINTING, 6. CAULKING, 7. EXTERIOR DOORS, 8. WINDOWS, 9. CONDENSATION, VAPOR RETARDER, INSULATION, AND VENTILATION, 10. MISCELLANEOUS ARCHITECTURAL REQUIREMENTS.




Metal Building Contracting and Construction


Book Description

This A-to-Z guide provides everything contractors need to maximize success and profits in the booming metal building business. Written by a contractor with 37 years' experience, this book shows you how to get into the metal building business, make your business grow, and capitalize on the mushrooming demand for these multiuse structures.




Engineering Education


Book Description




Roofing Handbook


Book Description

CD-ROM contains: Directory of Internet resources.