Analogue IC Design


Book Description

Analogue IC Design has become the essential title covering the current-mode approach to integrated circuit design. The approach has sparked much interest in analogue electronics and is linked to important advances in integrated circuit technology, such as CMOS VLSI which allows mixed analogue and digital circuits and high-speed GaAs processing.




Analog Integrated Circuit Design


Book Description

When first published in 1996, this text by David Johns and Kenneth Martin quickly became a leading textbook for the advanced course on Analog IC Design. This new edition has been thoroughly revised and updated by Tony Chan Carusone, a University of Toronto colleague of Drs. Johns and Martin. Dr. Chan Carusone is a specialist in analog and digital IC design in communications and signal processing. This edition features extensive new material on CMOS IC device modeling, processing and layout. Coverage has been added on several types of circuits that have increased in importance in the past decade, such as generalized integer-N phase locked loops and their phase noise analysis, voltage regulators, and 1.5b-per-stage pipelined A/D converters. Two new chapters have been added to make the book more accessible to beginners in the field: frequency response of analog ICs; and basic theory of feedback amplifiers.




Designing Analog Chips


Book Description

A comprehensive introduction to CMOS and bipolar analog IC design. The book presumes no prior knowledge of linear design, making it comprehensible to engineers with a non-analog back-ground. The emphasis is on practical design, covering the entire field with hundreds of examples to explain the choices. Concepts are presented following the history of their discovery. Content: 1. Devices Semiconductors, The Bipolar Transistor, The Integrated Circuit, Integrated NPN Transistors, The Case of the Lateral PNP Transistor, CMOS Transistors, The Substrate PNP Transistor, Diodes, Zener Diodes, Resistors, Capacitors, CMOS vs. Bipolar; 2. Simulation, DC Analysis, AC Analysis, Transient Analysis, Variations, Models, Diode Model, Bipolar Transis-tor Model, Model for the Lateral PNP Transistor, MOS Transistor Models, Resistor Models, Models for Capacitors; 3. Current Mirrors; 4. Differential Pairs; 5. Current Sources; 6. Time Out: Analog Measures, dB, RMS, Noise, Fourier Analysis, Distortion, Frequency Compensation; 7. Bandgap References; 8. Op Amps; 9. Comparators; 10. Transimpedance Amplifiers; 11. Timers and Oscillators; 12. Phase-Locked Loops; 13. Filters; 14. Power, Linear Regulators, Low Drop-Out Regulators, Switching Regulators, Linear Power Amplifiers, Switching Power Am-plifiers; 15. A to D and D to A, The Delta-Sigma Converter; 16. Odds and Ends, Gilbert Cell, Multipliers, Peak Detectors, Rectifiers and Averaging Circuits, Thermometers, Zero-Crossing Detectors; 17. Layout.







Analog Integrated Circuit Design by Simulation: Techniques, Tools, and Methods


Book Description

Learn the principles and practices of simulation-based analog IC design This comprehensive textbook and on-the-job reference offers clear instruction on analog integrated circuit design using the latest simulation techniques. Ideal for graduate students and professionals alike, the book shows, step by step, how to develop and deploy integrated circuits for cutting-edge Internet of Things (IoT) and other applications. Analog Integrated Circuit Design by Simulation: Techniques, Tools, and Methods lays out practical, ready-to-apply engineering strategies. Application layer, device layer, and circuit layer IC design are covered in complete detail. You will learn how to tackle real-world design problems and avoid long cycles of trial and error. Coverage includes: First-order DC response Unified closed-loop model Accurate modeling of DC response Frequency and step response Multi-pole dynamic response and stability Effect of external network on differential gain Continuous-time and discrete-time amplifiers MOSFET, NMOS, and PMOS characteristics Small-signal modeling and circuit analysis Resistor and capacitor design Current sources, sinks, and mirrors Basic, symmetrical, folded-cascode, and Miller OTAs Opamps with source-follower and common-source output stages Fully differential OTAs and opamps




Advances in Analog and RF IC Design for Wireless Communication Systems


Book Description

Advances in Analog and RF IC Design for Wireless Communication Systems gives technical introductions to the latest and most significant topics in the area of circuit design of analog/RF ICs for wireless communication systems, emphasizing wireless infrastructure rather than handsets. The book ranges from very high performance circuits for complex wireless infrastructure systems to selected highly integrated systems for handsets and mobile devices. Coverage includes power amplifiers, low-noise amplifiers, modulators, analog-to-digital converters (ADCs) and digital-to-analog converters (DACs), and even single-chip radios. This book offers a quick grasp of emerging research topics in RF integrated circuit design and their potential applications, with brief introductions to key topics followed by references to specialist papers for further reading. All of the chapters, compiled by editors well known in their field, have been authored by renowned experts in the subject. Each includes a complete introduction, followed by the relevant most significant and recent results on the topic at hand. This book gives researchers in industry and universities a quick grasp of the most important developments in analog and RF integrated circuit design. - Emerging research topics in RF IC design and its potential application - Case studies and practical implementation examples - Covers fundamental building blocks of a cellular base station system and satellite infrastructure - Insights from the experts on the design and the technology trade-offs, the challenges and open questions they often face - References to specialist papers for further reading




CMOS analog circuit design


Book Description




CMOS Analog Integrated Circuits


Book Description

High-speed, power-efficient analog integrated circuits can be used as standalone devices or to interface modern digital signal processors and micro-controllers in various applications, including multimedia, communication, instrumentation, and control systems. New architectures and low device geometry of complementary metaloxidesemiconductor (CMOS) technologies have accelerated the movement toward system on a chip design, which merges analog circuits with digital, and radio-frequency components.




Analog Design Essentials


Book Description

This unique book contains all topics of importance to the analog designer which are essential to obtain sufficient insights to do a thorough job. The book starts with elementary stages in building up operational amplifiers. The synthesis of opamps is covered in great detail. Many examples are included, operating at low supply voltages. Chapters on noise, distortion, filters, ADC/DACs and oscillators follow. These are all based on the extensive amount of teaching that the author has carried out world-wide.




Design of Analog Integrated Circuits and Systems


Book Description

It follows with a thorough treatment of design operational and operational transconductance amplifiers, and concludes with a unified presentation of sample-data and continuous-time signal processing systems.