Antenna Engineering Handbook


Book Description

The gold-standard reference on the design and application of classic and modern antennas—fully updated to reflect the latest advances and technologiesThis new edition of the “bible of antenna engineering” has been updated to provide start-to-finish coverage of the latest innovations in antenna design and application. You will find in-depth discussion of antennas used in modern communication systems, mobile and personal wireless technologies, satellites, radar deployments, flexible electronics, and other emerging technologies, including 5G, terahertz, and wearable electronics. Antenna Engineering Handbook, Fifth Edition, is bolstered by real-world examples, hundreds of illustrations, and an emphasis on the practical aspects of antennas.Featuring 60 chapters and contributions from more than 80 renowned experts, this acclaimed resource is edited by one of the world’s leading antenna authorities. This edition features all of the classic antenna types, plus new and emerging designs, with 13 all-new chapters and important updates to nearly all chapters from past editions.Antenna Engineering Handbook, Fifth Edition, clearly explains cutting-edge applications in WLANs, automotive systems, PDAs, and handheld devices, making it an indispensable companion for today’s antenna practitioners and developers.Coverage includes:•Antenna basics and classic antennas•Design approaches for antennas and arrays•Wideband and multiband antennas•Antennas for mobile devices and PDAs, automotive applications, and aircraft•Base station and smart antennas•Beamforming and 5G antennas•Millimeter-wave and terahertz antennas•Flexible, wearable, thin film, origami, dielectric, and on-chip antennas•MIMO antennas and phased arrays•Direction-finding and GPS antennas•Active antennas•Low-profile wideband antennas•Nanoantennas•Reflectors and other satellite and radio-telescope antennas•Low-frequency, HF, VHF, UHF, ECM, and ESM antennas•Impedance-matching techniques and material characteristics•Metastructured and frequency selective surfaces•Propagation and guided structures•Computational techniques and toolsets•Indoor and outdoor measurements




Antenna Engineering Handbook


Book Description

Best engineer's reference on antennas. Table of Contents: Introduction to Antennas; Fundamentals of Antennas; Arrays of Discrete Elements; Dipoles and Monopoles; Loop Antennas; Small Antennas; Microstrip Antennas; Slot Antennas; Slot-Antenna Arrays; Leaky-Wave Antennas; Long-Wire Antennas; Surface-Wave Antennas and Surface-Wave Excited Arrays; Helical Antennas; Frequency-Independent Antennas; Horn Antennas; Lens Antennas; Reflector Antennas; Feeds for Lenses and Reflectors; Electromechanical Scanning Antennas; Frequency-Scan Antennas; Phased Arrays; Conformal and Low-Profile Arrays; Adaptive Antennas; Methods of Polarization Synthesis; Low-Frequency Antennas; Medium-Frequency Broadcast Antennas; High-Frequency Antennas; VHF and UHF Communications Antennas; and more. Index. 800 illustrations.




Printed MIMO Antenna Engineering


Book Description

Wireless communications has made a huge leap during the past two decades. The multiple-input-multiple-output (MIMO) technology was proposed in the 1990’s as a viable solution that can overcome the data rate limit experienced by single-input-single-output (SISO) systems. This resource is focused on printed MIMO antenna system design. Printed antennas are widely used in mobile and handheld terminals due to their conformity with the device, low cost, good integration within the device elements and mechanical parts, as well as ease of fabrication. A perfect design companion for practicing engineers, this book provides full design examples from literature, along with detailed illustrations for the various antenna geometries. This resource overviews the various applications that currently depend on printed MIMO antennas, and provides design guidelines and remarks throughout the book for guidance.




Characteristic Modes


Book Description

Describes how to systematically implement various characteristic mode (CM) theories into designs of practical antenna systems This book examines both theoretical developments of characteristic modes (CMs) and practical developments of CM-based methodologies for a variety of critical antenna designs. The book is divided into six chapters. Chapter 1 provides an introduction and discusses the recent advances of the CM theory and its applications in antenna engineering. Chapter 2 describes the formulation of the characteristic mode theory for perfectly electrically conducting (PEC) bodies and discusses its numerical implementations. Chapter 3 presents the CM theory for PEC structures embedded in multilayered medium and its applications. Chapter 4 covers recent advances in CM theory for dielectric bodies and also their applications. Chapter 5 discusses the CM theory for N-port networks and its applications to the design of antenna arrays. Finally, Chapter 6 discusses the design of platform-integrated antenna systems using characteristic modes. This book features the following: Introduces characteristic mode theories for various electromagnetic structures including PEC bodies, structures in multilayered medium, dielectric bodies, and N-port networks Examines CM applications in electrically small antennas, microstrip patch antennas, dielectric resonator antennas, multiport antennas, antenna arrays, and platform mounted antenna systems Discusses numerical algorithms for the implementation of the characteristic mode theories in computer code Characteristic Modes: Theory and Applications in Antenna Engineering will help antenna researchers, engineers, and students find new solutions for their antenna design challenges.




Small Antenna Design


Book Description

As wireless devices and systems get both smaller and more ubiquitous, the demand for effective but small antennas is rapidly increasing. Small Antenna Design describes the theory behind effective small antenna design and give design techniques and examples for small antennas for different operating frequencies. Design techniques are given for the entire radio spectrum, from a very hundred kilohertz to the gigahertz range.Unlike other antenna books which are heavily mathematical and theoretical, Douglas Miron keeps mathematics to the absolute minimum required to explain design techniques. Ground planes, essential for operation of many antenna designs, are extensively discussed. - Author's extensive experience as a practicing antenna design engineer gives book a strong "hands-on" emphasis - Covers antenna design techniques from very low frequency (below 300 kHz) to microwave (above 1 GHz) ranges - Special attention is given to antenna design for mobile/portable applications such as cell phones, WiFi, etc




Antenna Engineering Using Physical Optics


Book Description

Spend less time setting up complex antenna design problems and improve the accuracy of your results with this practical new book and software package. It shows you how to combine physical optics modeling techniques with the free space dyadic Green's function to quickly and easily calculate antenna patterns and diffraction from nearby objects, letting your PC do the specialized math for you.




Antenna Engineering


Book Description

The book deals with theoretical and experimental research of antennas. The presentation is based on the electromagnetic theory. It begins with the theory of thin antennas. Thin antennas represent one of the main types of radiators, thus the theory of thin antennas is the basis of the antennas analysis. Special attention is paid to the integral equation of Leontovich-Levin for a current along a straight thin-walled metal cylinder, which is equivalent to the equation of Hallen with a precise kernel. Together with the analysis of various types of antennas, the book deals with the problems of synthesis including the creation a wide-band radiator by means of determining of the types and the magnitudes of concentrated loads, which are connected along a linear radiator and create in a given frequency band high electrical performance. Problems of antenna engineering are discussed in the second half of the book, including the results of application of a compensation method for the protection of humans against irradiation and structural features of ship antennas.




Electromagnetic Band Gap Structures in Antenna Engineering


Book Description

This book is a detailed account of electromagnetic band gap (EBG) theory, analysis and applications, ideal for researchers and engineers.




Modern Lens Antennas for Communications Engineering


Book Description

The aim of this book is to present the modern design principles and analysis of lens antennas. It gives graduates and RF/Microwave professionals the design insights in order to make full use of lens antennas. Why do we want to write a book in lens antennas? Because this topic has not been thoroughly publicized, its importance is underestimated. As antennas play a key role in communication systems, recent development in wireless communications would indeed benefit from the characteristics of lens antennas: low profile, and low cost etc. The major advantages of lens antennas are narrow beamwidth, high gain, low sidelobes and low noise temperature. Their structures can be more compact and weigh less than horn antennas and parabolic antennas. Lens antennas with their quasi-optical characteristics, also have low loss, particularly at near millimeter and submillimeter wavelengths where they have particular advantages. This book systematically conducts advanced and up-to-date treatment of lens antennas.




Modeling and Control of Antennas and Telescopes


Book Description

Mechanical engineering, and engineering discipline born of the needs of the industrial revolution, is once again asked to do its substantial share in the call for industrial renewal. The general call is urgent as we face profound issues of productivity and competitiveness that require engineering solutions, among others. The Mechanical Engineering Series is a series featuring graduate texts and research monographs intended to address the need for information in contemporary areas of mechanical engineering. The series is conceived as a comprehensive one that covers a broad range of c- centrations important to mechanical engineering graduate education and research. We are fortunate to have a distinguished roster of series editors, each an expert in one of the areas of concentration. The names of the series editors are listed on page vi of this volume. The areas of concentration are applied mechanics, biomechanics, computational mechanics, dynamic systems and control, energetics, mechanics of materials, processing, thermal science, and tribology. Preface This book is based on my experience with the control systems of antennas and radiotelescopes. Overwhelmingly, it is based on experience with the NASA Deep Space Network (DSN) antennas. It includes modeling the antennas, developing control algorithms, eld testing, system identi cation, performance evaluation, and 1 troubleshooting. My previous book emphasized the theoretical aspects of antenna control engineering, while this one describes the application part of the antenna control engineering.