Behaviour of Energetic Coherent Structures in Turbulent Pipe Flow at High Reynolds Numbers


Book Description

In this thesis, coherent turbulent structures in turbulent pipe flow are investigated at relatively high Reynolds numbers and study their association in both total kinetic energy and Reynolds shear stress. Experimental investigations have been performed in Cottbus Large Pipe test facility (CoLaPipe) for pipe flow over a wide range of Reynolds number 8 × 104 ≤ ReD ≤ 1 × 106, located at the Aerodynamics and Fluid Mechanics Department, Brandenburg University of Technology Cottbus- Senftenberg (BTU). The first part of the thesis focuses on determining the contribution of the coherent structures using one-dimensional spectral analysis and assessing the structures behaviour in the outer region of pipe flow using high spatial resolution Hot-wire measurement up to 30kHz. The results of the power and pre-multiplied spectrum of stream-wise velocity indicate that the wavelength value of very large scale motions (VLSMs) acquires 19R at a maximum Reynolds number range ReD=1 × 106 (Reτ =19000). On the other hand, large-scale motions have a wavelength value of 3R over different Reynolds number range. Regarding the identified wavelength values, it is observed that contribution to energy for structures greater than 3R carries 55% of total kinetic energy. In addition, temporal-spatial resolution using the High-speed PIV measurements has been performed in CoLaPipe to estimate the contribution magnitude of stream-wise/wall-normal velocity fluctuations to total kinetic energy and Reynolds shear stress in the logarithmic and outer layer.




Direct Numerical Simulation of Very-Large-Scale Motions in Turbulent Pipe Flow


Book Description

Die turbulente Rohrströmung ist nicht nur von großer Bedeutung für Anwendungen im Ingenieurbereich, sondern auch für die Grundlagenforschung von wandnaher Turbulenz. In der vorliegenden Arbeit wird die Interaktion sogenannter turbulenter Superstrukturen (engl.: very-large-scale motions, VLSMs) mit der kleinskaligen Wandturbulenz auf Basis der Methode der direkten numerischen Simulation untersucht. Dabei werden Schubspannungs-Reynoldszahlen bis Reτ = 2880 und Rohrlängen bis L = 42R berücksichtigt. Es wird das Konvergenz- und Skalierungsverhalten verschiedener statistischer Momente der Geschwindigkeitsverteilung untersucht und in Bezug auf VLSMs diskutiert. Die folgende Analyse der axialen Energietransportgleichung des gefilterten Geschwindigkeitsfeldes legt offen, dass VLSMs Energie von der mittleren Strömung zugeführt bekommen, ähnlich den kleinskaligen Strukturen durch den turbulenten Produktionsmechanismus. Die verschiedenen Terme der Energiebilanz werden sowohl anhand von mittleren Profilen, als auch instantanen Strömungsvisualisierungen und drei-dimensionalen Korrelationen diskutiert, wobei auch auf das Phänomen der inversen turbulenten Energiekaskade eingegangen wird. Die Forschungsarbeit gewährt dabei neue Einblicke in die Interaktion der VLSMs mit dem turbulenten Wandzyklus und trägt zum besseren Verständnis der turbulenten Rohrströmung bei. Turbulent pipe flow is not only of importance to engineering applications but also of fundamental interest to the study of wall-bounded turbulence. In the present work, the interaction of the so-called very-large-scale motions (VLSMs) with the near-wall, small-scale turbulence is explored by means of direct numerical simulation for friction Reynolds numbers up to Reτ = 2880 and pipe lengths up to L = 42R. Besides, the convergence and the scaling of different order moments of the velocity distribution are studied and also discussed with regard to VLSMs. The subsequent analysis of the streamwise energy budget equation of the filtered velocity field reveals that VLSMs obtain their energy from the mean velocity field via a production mechanism similar to the one known from the near-wall cycle. Moreover, the different energy budget terms are investigated by means of statistical averages, instantaneous flow field visualisations, and three-dimensional correlations, wherein the backscattering phenomenon is also dealt with. In brief, the research sheds new light on our understanding of the interaction between VLSMs and the near-wall cycle and leads to a better grasp of turbulent pipe flow in general.




Liutex and Its Applications in Turbulence Research


Book Description

Liutex and Its Applications in Turbulence Research reviews the history of vortex definition, provides an accurate mathematical definition of vortices, and explains their applications in flow transition, turbulent flow, flow control, and turbulent flow experiments. The book explains the term "Rortex" as a mathematically defined rigid rotation of fluids or vortex, which could help solve many longstanding problems in turbulence research. The accurate mathematical definition of the vortex is important in a range of industrial contexts, including aerospace, turbine machinery, combustion, and electronic cooling systems, so there are many areas of research that can benefit from the innovations described here. This book provides a thorough survey of the latest research in generalized and flow-thermal, unified, law-of-the-wall for wall-bounded turbulence. Important theory and methodologies used for developing these laws are described in detail, including: the classification of the conventional turbulent boundary layer concept based on proper velocity scaling; the methodology for identification of the scales of velocity, temperature, and length needed to establish the law; and the discovery, proof, and strict validations of the laws, with both Reynolds and Prandtl number independency properties using DNS data. The establishment of these statistical laws is important to modern fluid mechanics and heat transfer research, and greatly expands our understanding of wall-bounded turbulence. - Provides an accurate mathematical definition of vortices - Provides a thorough survey of the latest research in generalized and flow-thermal, unified, law-of-the-wall for wall-bounded turbulence - Explains the term "Rortex as a mathematically defined rigid rotation of fluids or vortex - Covers the statistical laws important to modern fluid mechanics and heat transfer research, and greatly expands our understanding of wall-bounded turbulence




Ten Chapters in Turbulence


Book Description

Leading experts summarize our current understanding of the fundamental nature of turbulence, covering a wide range of topics.




Self-sustaining Mechanisms of Wall Turbulence


Book Description

Why is wall turbulence self-sustaining? In this book well-regarded researchers not only discuss what they know and believe, but also speculate on ideas that still require numerical or experimental testing and verification. An initial brief history of boundary layer structure research is followed by chapters on experimental information and specific topics within the subject. There are then sections on computational aspects.




The Structure of Turbulent Shear Flow


Book Description

Develops a physical theory from the mass of experimental results, with revisions to reflect advances of recent years.




Turbulence, Coherent Structures, Dynamical Systems and Symmetry


Book Description

Describes methods revealing the structures and dynamics of turbulence for engineering, physical science and mathematics researchers working in fluid dynamics.




Engineering Turbulence Modelling and Experiments - 4


Book Description

These proceedings contain the papers presented at the 4th International Symposium on Engineering Turbulence Modelling and Measurements held at Ajaccio, Corsica, France from 24-26 May 1999. It follows three previous conferences on the topic of engineering turbulence modelling and measurements. The purpose of this series of symposia is to provide a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. Turbulence is still one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends more and more on the performance of the turbulence models. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation.




Progress in Wall Turbulence 2


Book Description

This is the proceedings of the ERCOFTAC Workshop on Progress in Wall Turbulence: Understanding and Modelling, that was held in Lille, France from June 18 to 20, 2014. The workshop brought together world specialists of near wall turbulence and stimulated exchanges between them around up-to-date theories, experiments, simulations and numerical models. This book contains a coherent collection of recent results on near wall turbulence including theory, new experiments, DNS and modeling with RANS, LES. The fact that both physical understanding and modeling by different approaches are addressed by the best specialists in a single workshop is original.




Coherent Flow Structures at Earth's Surface


Book Description

An expert review of recent progress in the study of turbulent flows with a focus on recently identified organized structures. This book reviews the recent progress in the study of the turbulent flows that sculpt the Earth’s surface, focusing in particular on the organized structures that have been identified in recent years within turbulent flows. These coherent flow structures can include eddies or vortices at the scale of individual grains, through structures that scale with the flow depth in rivers or estuaries, to the large-scale structure of flows at the morphological or landform scale. These flow structures are of wide interest to the scientific community because they play an important role in fluid dynamics and influence the transport, erosion and deposition of sediment and pollutants in a wide variety of fluid flow environments. Scientific knowledge of these structures has improved greatly over the past 20 years as computational fluid dynamics has come to play an increasing important part in building our understanding of coherent flow structures across a broad range of scales. Chapters comprise a series of major, invited papers and a selection of the most novel, innovative papers presented at the second Coherent Flow Structures Conference held August 3-5, 2011 at Simon Fraser University in Burnaby, British Columbia. Chapters focus on six major themes: Dynamics of coherent flow structures (CFS) in geophysical flows Interaction of turbulent flows, vegetation and ecological habitats Coherent structure of atmospheric flows Numerical modeling of coherent flow structures Turbulence in open channel flows Coherent flow structures, sediment transport and morphological feedbacks.