Benchmarking of Control Strategies for Wastewater Treatment Plants


Book Description

Wastewater treatment plants are large non-linear systems subject to large perturbations in wastewater flow rate, load and composition. Nevertheless these plants have to be operated continuously, meeting stricter and stricter regulations. Many control strategies have been proposed in the literature for improved and more efficient operation of wastewater treatment plants. Unfortunately, their evaluation and comparison – either practical or based on simulation – is difficult. This is partly due to the variability of the influent, to the complexity of the biological and biochemical phenomena and to the large range of time constants (from a few minutes to several days). The lack of standard evaluation criteria is also a tremendous disadvantage. To really enhance the acceptance of innovative control strategies, such an evaluation needs to be based on a rigorous methodology including a simulation model, plant layout, controllers, sensors, performance criteria and test procedures, i.e. a complete benchmarking protocol. This book is a Scientific and Technical Report produced by the IWA Task Group on Benchmarking of Control Strategies for Wastewater Treatment Plants. The goal of the Task Group includes developing models and simulation tools that encompass the most typical unit processes within a wastewater treatment system (primary treatment, activated sludge, sludge treatment, etc.), as well as tools that will enable the evaluation of long-term control strategies and monitoring tasks (i.e. automatic detection of sensor and process faults). Work on these extensions has been carried out by the Task Group during the past five years, and the main results are summarized in Benchmarking of Control Strategies for Wastewater Treatment Plants. Besides a description of the final version of the already well-known Benchmark Simulation Model no. 1 (BSM1), the book includes the Benchmark Simulation Model no. 1 Long-Term (BSM1_LT) – with focus on benchmarking of process monitoring tasks – and the plant-wide Benchmark Simulation Model no. 2 (BSM2). Authors: Krist V. Gernaey, Technical University of Denmark, Lyngby, Denmark, Ulf Jeppsson, Lund University, Sweden, Peter A. Vanrolleghem, Université Laval, Quebec, Canada and John B. Copp, Primodal Inc., Hamilton, Ontario, Canada




Handbook of Water and Wastewater Treatment Plant Operations, Second Edition


Book Description

Hailed on its initial publication as a real-world, practical handbook, the second edition of Handbook of Water and Wastewater Treatment Plant Operations continues to make the same basic point: water and wastewater operators must have a basic skill set that is both wide and deep. They must be generalists, well-rounded in the sciences, cyber operations, math operations, mechanics, technical concepts, and common sense. With coverage that spans the breadth and depth of the field, the handbook explores the latest principles and technologies and provides information necessary to prepare for licensure exams. Expanded from beginning to end, this second edition provides a no-holds-barred look at current management issues and includes the latest security information for protecting public assets. It presents in-depth coverage of management aspects and security needs and a new chapter covering the basics of blueprint reading. The chapter on water and wastewater mathematics has tripled in size and now contains an additional 200 problems and 350 math system operational problems with solutions. The manual examines numerous real-world operating scenarios, such as the intake of raw sewage and the treatment of water via residual management, and each scenario includes a comprehensive problem-solving practice set. The text follows a non-traditional paradigm based on real-world experience and proven parameters. Clearly written and user friendly, this revision of a bestseller builds on the remarkable success of the first edition. This book is a thorough compilation of water science, treatment information, process control procedures, problem-solving techniques, safety and health information, and administrative and technological trends.




Water and Energy


Book Description

Rapid and important developments in the area of energy - water nexus over the last two to three years have been significant. This new edition of Water and Energy: Threats and Opportunities is timely and continues to highlight the inextricable link between water and energy, providing an up-to-date overview of the subject with helpful detailed summaries of the technical literature. Water and Energy has been up-dated throughout and major changes are: new chapters on global warming and fossil fuels, including shale gas and fracking; the consequences of the Deepwater Horizon accident in the Mexican Gulf and the Niger Delta oil spills; new developments in hydropower; and continued competition between food, water and energy. Water and Energy Threats and Opportunities, 2e creates an awareness of the important couplings between water and energy. It shows how energy is used in all the various water cycle operations and demonstrates how water is used and misused in all kinds of energy production and generation.Population increase, climate change and an increasing competition between food and fuel production create enormous pressures on both water and energy availability. Since there is no replacement for water, water security looks more crucial than energy security. This is true not only in developing countries but also in the most advanced countries. For example, the western parts of the USA suffer from water scarcity that provides a real security threat. Part One of the book describes the water-energy nexus, the conflicts and competitions and the couplings between water security, energy security, and food security. Part Two captures how climate change, population increase and the growing food demand will have major impact on water availability in many countries in the world. Part Three describes water for energy and how energy production and conversion depend on water availability. As a consequence, all planning has to take both water and energy into consideration. The environmental (including water) consequences of oil and coal exploration and refining are huge, in North America as well as in the rest of the world. Furthermore, oil leak accidents have hit America, Africa, Europe as well as Asia. The consequences of hydropower are discussed and the competition between hydropower generation, flood control and water storage is illustrated. The importance of water for cooling thermal power plants is described, as this was so tragically demonstrated at the Fukushima nuclear plants in 2011. Climate change will further emphasize the strong coupling between water availability and the operation of power plants. Part Four analyses energy for water - how water production and treatment depend on energy. The book shows that a lot can be done to improve equipment, develop processes and apply advanced monitoring and control to save energy for water operations. Significant amounts of energy can be saved by better pumping, the reduction of leakages, controlled aeration in biological wastewater treatment, more efficient biogas production, and by improved desalination processes. There are 3 PowerPoint presentations available for Water and Energy - threats and opportunities, 2e. About the author Gustaf Olsson, Professor Em. in Industrial Automation, Lund University, Sweden Since 2006, Gustaf has been Professor Emeritus at Lund University, Sweden. Gustaf has devoted his research to control and automation in water systems, electrical power systems and process industries. From 2006 to 2008 he was part time professor in electrical power systems at Chalmers University of Technology, Sweden. He is guest professor at the Technical University of Malaysia (UTM) and at the Tsinghua University in Beijing, China and he is an honorary faculty member of the Exeter University in UK. Between 2005 and 2010 he was the editor-in-chief of the journals Water Science and Technology and Water Science and Technology/Water Supply, (IWA Publishing). From 2007 to 2010, he was a member of the IWA Board of Directors and in 2010 he received the IWA Publication Award. In 2012 he was the awardee of an Honorary Doctor degree at UTM and an Honorary Membership of IWA. Gustaf has guided 23 PhDs and a few hundred MSc students through their exams and has received the Lund University pedagogical award for distinguished achievements in the education". The Lund University engineering students elected him as the teacher of the year He has spent extended periods as a guest professor and visiting researcher at universities and companies in the USA, Australia and Japan and has been invited as a guest lecturer in 19 countries outside Sweden. He has authored nine books published in English, Russian, German and Chinese and and contributed with chapters in another 19 books as well as more than 170 scientific publications.




Innovative Wastewater Treatment & Resource Recovery Technologies: Impacts on Energy, Economy and Environment


Book Description

This book introduces the 3R concept applied to wastewater treatment and resource recovery under a double perspective. Firstly, it deals with innovative technologies leading to: Reducing energy requirements, space and impacts; Reusing water and sludge of sufficient quality; and Recovering resources such as energy, nutrients, metals and chemicals, including biopolymers. Besides targeting effective C,N&P removal, other issues such as organic micropollutants, gases and odours emissions are considered. Most of the technologies analysed have been tested at pilot- or at full-scale. Tools and methods for their Economic, Environmental, Legal and Social impact assessment are described. The 3R concept is also applied to Innovative Processes design, considering different levels of innovation: Retrofitting, where novel units are included in more conventional processes; Re-Thinking, which implies a substantial flowsheet modification; and Re-Imagining, with completely new conceptions. Tools are presented for Modelling, Optimising and Selecting the most suitable plant layout for each particular scenario from a holistic technical, economic and environmental point of view.




Handbook of Water and Wastewater Treatment Plant Operations


Book Description

Water and wastewater treatment plant operators must have a breadth of knowledge that encompasses more than scientific theory. They need to be generalists with knowledge bridging several scientific, academic, and engineering disciplines. Unfortunately, until now, many of the existing texts in the field were too limited in scope and narrow in focus.




Municipal Benchmarks


Book Description

Ammons (public administration, U. of North Carolina) put together this guide to benchmarks for mayors, city council members, city managers, department heads, management analysts, and citizens who want a measuring rod for local government services. He includes national standards, engineered standar




Handbook of Water and Wastewater Treatment Plant Operations, Third Edition


Book Description

Handbook of Water and Wastewater Treatment Plant Operations the first thorough resource manual developed exclusively for water and wastewater plant operators has been updated and expanded. An industry standard now in its third edition, this book addresses management issues and security needs, contains coverage on pharmaceuticals and personal care products (PPCPs), and includes regulatory changes. The author explains the material in layman’s terms, providing real-world operating scenarios with problem-solving practice sets for each scenario. This provides readers with the ability to incorporate math with both theory and practical application. The book contains additional emphasis on operator safety, new chapters on energy conservation and sustainability, and basic science for operators. What’s New in the Third Edition: Prepares operators for licensure exams Provides additional math problems and solutions to better prepare users for certification exams Updates all chapters to reflect the developments in the field Enables users to properly operate water and wastewater plants and suggests troubleshooting procedures for returning a plant to optimum operation levels A complete compilation of water science, treatment information, process control procedures, problem-solving techniques, safety and health information, and administrative and technological trends, this text serves as a resource for professionals working in water and wastewater operations and operators preparing for wastewater licensure exams. It can also be used as a supplemental textbook for undergraduate and graduate students studying environmental science, water science, and environmental engineering.




Water Reuse


Book Description

Expanding water reuse-the use of treated wastewater for beneficial purposes including irrigation, industrial uses, and drinking water augmentation-could significantly increase the nation's total available water resources. Water Reuse presents a portfolio of treatment options available to mitigate water quality issues in reclaimed water along with new analysis suggesting that the risk of exposure to certain microbial and chemical contaminants from drinking reclaimed water does not appear to be any higher than the risk experienced in at least some current drinking water treatment systems, and may be orders of magnitude lower. This report recommends adjustments to the federal regulatory framework that could enhance public health protection for both planned and unplanned (or de facto) reuse and increase public confidence in water reuse.







Activated Sludge Models


Book Description

This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9