Building 4.6/5.4L Ford Horsepower on the Dyno


Book Description

The 4.6- and 5.4-liter modular Ford engines are finally catching up with the legendary 5.0L in terms of aftermarket support and performance parts availability. Having a lot of parts to choose from is great for the enthusiast, but it can also make it harder to figure out what parts and modifications will work best. Building 4.6/5.4L Ford Horsepower on the Dyno takes the guesswork out of modification and parts selection by showing you the types of horsepower and torque gains expected by each modification. Author Richard Holdener uses over 340 photos and 185 back-to-back dyno graphs to show you which parts increase horsepower and torque, and which parts don't deliver on their promises. Unlike sources that only give you peak numbers and gains, Building 4.6/5.4L Ford Horsepower on the Dyno includes complete before-and-after dyno graphs, so you can see where in the RPM range these parts make (or lose) the most horsepower and torque. Holdener covers upgrades for 2-, 3-, and 4-valve modular engines, with chapters on throttle bodies and inlet elbows, intake manifolds, cylinder heads, camshafts, nitrous oxide, supercharging, turbocharging, headers, exhaust systems, and complete engine buildups.




4.6L & 5.4L Ford Engines


Book Description

Since 1991, the popular and highly modifiable Ford 4.6-liter has become a modern-day V-8 phenomenon, powering everything from Ford Mustangs to hand-built hot rods and the 5.4-liter has powered trucks, SUVs, the Shelby GT500, and more. The wildly popular 4.6-liter has created an industry unto itself with a huge supply of aftermarket high-performance parts, machine services, and accessories. Its design delivers exceptional potential, flexibility, and reliability. The 4.6-liter can be built to produce 300 hp up to 2,000 hp, and in turn, it has become a favorite among rebuilders, racers, and high-performance enthusiasts. 4.6-/5.4-Liter Ford Engines: How to Rebuild expertly guides you through each step of rebuilding a 4.6-liter as well as a 5.4-liter engine, providing essential information and insightful detail. This volume delivers the complete nuts-and-bolts rebuild story, so the enthusiast can professionally rebuild an engine at home and achieve the desired performance goals. In addition, it contains a retrospective of the engine family, essential identification information, and component differences between engines made at Romeo and Windsor factories for identifying your engine and selecting the right parts. It also covers how to properly plan a 4.6-/5.4-liter build-up and choose the best equipment for your engine's particular application. As with all Workbench Series books, this book is packed with detailed photos and comprehensive captions, where you are guided step by step through the disassembly, machine work, assembly, start-up, break-in, and tuning procedures for all iterations of the 4.6-/5.4-liter engines, including 2-valve and 3-valve SOHC and the 4-valve DOHC versions. It also includes an easy-to-reference spec chart and suppliers guide so you find the right equipment for your particular build up.




How to Build Max Performance 4.6 Liter Ford Engines


Book Description

Ford's 4.6-liter-powered Mustang is the last remaining "classic" muscle car in the world and is incredibly popular with performance enthusiasts. More than 1,000,000 Mustangs have been built since 1996. Covers all 4.6 and 5.4-liter "Modular" motors--Ford's only V8 engine for Mustangs, fullsize cars, and light trucks from 1996 to 2004.




Ford 351 Cleveland Engines


Book Description

Ford's 351 Cleveland was designed to be a "mid-sized" V-8 engine, and was developed for higher performance use upon its launch in late 1969 for the 1970 models. The Cleveland engine addressed the major shortcoming of the Windsor engines that preceded it, namely cylinder head air flow. The Windsor engines just couldn't be built at the time to compete effectively with the strongest GM and Mopar small-block offerings, and the Cleveland engine was the answer to that problem. Unfortunately, the Cleveland engine was introduced at the end of Detroit's muscle car era, and the engine, in pure Cleveland form, was very short lived. It did continue on as a low compression passenger car and truck engine in the form of the 351M and 400M, which in their day, offered little in the way of excitement. Renewed enthusiasm in this engine has spawned an influx of top-quality new components that make building or modifying these engines affordable. This new book reviews the history and variations of the 351 Cleveland and Ford's related engines, the 351M and 400M. Basic dimensions and specifications of each engine, along with tips for identifying both design differences and casting numbers are covered. In addition, each engine's strong points and areas of concern are described in detail. Written with high performance in mind, both traditional power tricks and methods to increase efficiency of these specific engines are shared. Also, example builds of 400-, 500-, and even 600-hp engines are highlighted, so you can model your build after any of these powerhouses, depending on your intended use. With the influx of aftermarket parts, especially excellent cylinder heads, the 351 Cleveland as well as the 351M and 400m cousins are now seen as great engines to build. This book will tell you everything you need to know to build a great street or competition engine based in the 351 Cleveland platform.




How to Build Max-Performance Chevy LT1/LT4 Engines


Book Description

GM's LT1/LT4 engines represented the highest level of small-block V-8 develop-ment for the period between the legendary small-block Chevrolet and the introduction of the LS-series V-8. They powered all of the hottest production vehicles of the 1990s, including the Corvette, Camaro/Firebird, and Caprice/Impala SS. These enhanced small-blocks were reliable and strong, and can be built to impressive performance levels on a relatively small budget, with the right upgrades. This book guides you through the factory and aftermarket components of the LT1/LT4 engines, offering sound performance advice and recommendations. Additionally, complete engine buildup recipes are provided, along with their respective horsepower and torque levels. You can follow the advice of experts and achieve targeted results for your own project.




High-Performance Mustang Builder's Guide 1994-2004


Book Description

High-performance '94-'04 Mustangs represent the high-water mark for late- model Mustang enthusiasts. From the '94-'95s with the 5.0L, through the '96-'04 models with the 2- and 4-valve 4.6Ls, to the Bullitt, Mach 1, and factory supercharged '03-'04 Cobras - never before has such a range of highly modifiable performance cars been available. These Mustangs were amazing performers straight from the factory, but they can be even better with the right combination of performance parts. Regardless of which '94-'04 Mustang you start with, the availability of high- performance parts is unparalleled. You can build your Mustang for drag racing, road racing, or improved street performance - and High- Performance Mustang Builder's Guide 1994-2004 will show you how! Author Sean Hyland uses over 300 photos to explain how to upgrade your Mustang's engine, suspension, chassis, transmission, rear end, brakes, and body. There's even a special chapter on getting active in various forms of organized racing.




How to Swap Ford Modular Engines into Mustangs, Torinos and More


Book Description

The Ford modular engine is a popular swap for 1964-1/2-1973 Mustangs, Fox-Body Mustangs, trucks, hot rods, and other muscle cars because these high-tech engines provide exceptional performance and improved economy compared to their dated counterparts. Found in Mustangs and other Fords since the 1990s, installing a modular motor in a classic Ford infuses new technology and all the benefits that come with it into a classic car. Modular engines feature an overhead cam design that has massive horsepower potential, and are offered in 4.6-, 5.0-, 5.2- 5.4-, and 5.8-liter iterations. These high-tech 2-, 3-, and 4-valve engines are readily available as a crate engine, from salvage yards, and in running cars. This engine design has a large physical footprint, and swapping the engine requires a thorough plan, using the proper tools and facilities. Author Dave Stribling specializes in modular engine swaps, and expertly guides you through each crucial step of the engine transplant process. Because of the large physical size, many components, such as brake boosters, steering rods and boxes, and other underhood components, may need repositioning or modification to co-exist in the engine bay. Stribling covers motor-mount selection and fabrication, suspension and chassis modifications, aftermarket suspension options, firewall and transmission tunnel modifications, engine management and wiring procedures, fuel systems, exhaust systems, electrical mods and upgrades, and much more. Many older Ford muscle and performance cars are prime candidates for a modular swap; however, shock towers protrude into the engine bay of these cars, so modifications are necessary to fit the engine into the car, which is also covered here. Swapping the engine and transmission into a muscle car or truck requires specialized processes, and this insightful, explanatory, and detailed instruction is found only in this book. If you are considering swapping one of these high-tech engines into a non-original chassis, this book is a vital component to the process. p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 12.0px Arial}




How to Build Ford Flathead V-8 Horsepower


Book Description

This is a follow-up and companion to the successful How to Build a Flathead Ford V-8. This new edition describes the build-up of a 1946-1948 model 59 engine with a 4-barrel carburetor, a blown French flathead engine, and a blown Ardun engine-designed for street use. Many French flathead engines have been purchased by flathead lovers in the United States. There is a strong demand for those engine blocks, and the purchasers are desperate for any build-up information. The popularity of the Ardun is amazing, and this second volume contains a load of new information about the Ardun, as well as information and photographs of the lastest flathead goodies, such as crankshafts, connecting rods, intake manifolds, and cylinder heads.




Ford Engine Buildups HP1531


Book Description

A guide of more than 35 complete engine buildups offering a wide variety of performance levels for several generations of Ford V8 engine families.




Ford Coyote Engines: How to Build Max Performance


Book Description

Realize your Ford Coyote engine's full potential by using this detailed resource as a guide to select the right parts for the street or the strip. Veteran Ford writer and historian, Jim Smart, explains and highlights all of the latest and greatest options to achieve more horsepower and torque, and of course, faster quarter-mile times in Ford Coyote Engines: How to Build Max Performance. Some upgrades included are engine building techniques, cold-air induction kits, supercharger and pulley kits, better exhaust headers, fuel system and ECU tuning upgrades, and more. Both Ford and the aftermarket have produced an array of parts to squeeze even more power out of your Coyote. Ford introduced its first "clean slate design" V-8 engines in the early 1990s in Ford, Lincoln, and Mercury models. Known as the "Modular" engine family, the 4.6L engines employed new overhead cams, multi-valve performance, distributorless ignition, and more. This engine had new technology for its time, and it proved to be an extremely durable workhorse that logged hundreds of thousands of miles in police and taxi applications as well as light-duty trucks. And, of course, hotter versions, and even supercharged versions, found their way into performance applications such as Mustang GTs and Cobras. By 2011, Ford wanted something hotter and more current, especially for its flagship Mustang GT and GT350 models, which were suddenly competing with new 6.2L LS3 engines in Camaros and 6.4L Hemi engines in Challengers. Enter Ford's new 5.0L "Coyote" engine with Twin Independent Variable Cam Timing (Ti-VCT); it was an evolution of the earlier 4.6L and 5.4L Modular designs. Although the new Coyote engine had increased displacement, it still had far fewer cubes than the competition. Despite less displacement, the Coyote could hold its own against bigger Chevy and Chrysler mills thanks to advanced technology, such as 4V heads with better port and valvetrain geometry. The Coyote is also Ford's first foray into technology that includes Ti-VCT and cam-torque-actuated (CTA) function, which is a fancy way of saying variable cam timing for an incredible power curve over a broader RPM range. Even with all of this new technology, there is always room for improvement. If you are looking for even more power from your new Coyote, look no further than this volume.