Chemistry and Technology of Water Based Inks


Book Description

This book has been a long time in the making. Since its beginning the concept has been refined many times. This is a first attempt at a technical book for me and fortunately the goals I have set have been achieved. I have been involved in water based ink evaluation since its unclear begin nings in the early 1970s. This book is fashioned much like a loose-leaf binder I had put together for early reference and guidance. The format has worked for me over the years; I trust it will work for you. I would like to thank the many people who made this book possible, particularly Blackie Academic & Professional for their saint-like patience. Thanks again to W.B. Thiele (Thiele-Engdahl), to Lucille, my wife, and to James and Frank, my two boys. A final and special thank you to Richard Bach who taught me there are no limits.




Chemistry and Technology of Water Based Inks


Book Description

World-wide environmental legislation limiting the use of solvent based ink systems of the preceding decades has resulted in the development of a substitute and more environmentally safe alternative utilizing water base technologies. This has resulted in an enormous research and development effort by a multiplicity of related industries. Because of the tremendous evolution brought about by these changing technologies it has been extremely difficult for the water base ink chemist to keep abreast of the latest innovations. This book provides a working knowledge of the chemistry and technology of water base ink systems for chemists and engineers in the industry. It provides a foundation in all aspects of the industry, from the perception of color theory to the final starting point formulations. The articles in this volume have been specifically picked out to enlighten some of the most difficult problem areas in formulation and development. Highly practical, it is written by authors with many years of experience in the industry, ensuring commercial relevance throughout.




The Chemistry Of Inkjet Inks


Book Description

Modern printing is based on digitizing information and then representing it on a substrate, such as paper, pixel by pixel. One of the most common methods of digital printing is through inkjet printers. The process of inkjet printing is very complicated, and the ink used must meet certain chemical and physicochemical requirements including those related to storage stability; jetting performance; color management; wetting; and adhesion on substrates. Obviously, these requirements — which represent different scientific disciplines such as colloid chemistry, chemical engineering, and physics — indicate the need for an interdisciplinary book that will cover all aspects of making and utilizing inkjet inks.This book provides basic and essential information on the important parameters which determine ink performance. It covers not only the conventional use of inkjet technology on graphic applications, but also the extension of this method to print various functional materials, such as the use of conductive inks to print light-emitting diodes (LEDs) and three-dimensional structures. Thus, the book will serve a large community: industrial chemists who deal with ink formulations and synthesis of chemicals for inks; chemical engineers and physicists who deal with the rheological and flow properties of inks; and researchers in academic institutes who seek to develop novel applications based on inkjet printing of new materials.




Pulping Chemistry and Technology


Book Description

"The production of forestry products is based on a complex chain of knowledge in which the biological material wood with all its natural variability is converted into a variety of fiber-based products, each one with its detailed and specific quality requirements. This four volume set covers the entire spectrum of pulp and paper chemistry and technology from starting material to processes and products including market demands. Supported by a grant from the Ljungberg Foundation, the Editors at the Royal Institute of Technology, Stockholm, Sweden coordinated over 30 authors from university and industry to create this comprehensive overview. This work is essential for all students of wood science and a useful reference for those working in the pulp and paper industry or on the chemistry of renewable resources."--Publisher's description.




Chemistry and Technology of Printing and Imaging Systems


Book Description

Printing and imaging has a major impact on everyone. From the obvious examples of newspapers, magazines and comics through to photographs, currency and credit cards, and even the less obvious example of compact discs, everyone is familiar with the end products of printing and imaging. Until recently, the major printing and imaging technologies have been impact printing and silver halide photography. Important impact printing technologies are offset lithography, gravure, flexography and screen printing. All these technologies, including silver halide photography, are mature and have changed little over the past few decades. In contrast, the phenomenal growth of silicon chip technology over the past 15 years or so has spawned a new era of printing and imaging systems, the so-called non impact (or electronic) printers. Not all the non-impact printing technologies are of equal commercial importance. Some, like diazotype and conventional photolithography, are mature and are declining in importance. Other technologies, though relatively new, have not achieved notable commercial success. Electro graphy and magnetography fall into this category. The remaining tech nologies such as optical data storage (the technology used in compact discs), thermography (the technology used in electronic photography), ink jet printing and electrophotography are the non-impact printing tech nologies that are both modern and which have achieved remarkable commercial success, especially ink-jet printing and electrophotography.







Green Chemistry for Surface Coatings, Inks and Adhesives


Book Description

Many modern surface coatings and adhesives are derived from fossil feedstocks. With fossil fuels becoming more polluting and expensive to extract as supplies dwindle, industry is turning increasingly to nature, mimicking natural solutions using renewable raw materials and employing new technologies. Highlighting sustainable technologies and applications of renewable raw materials within the framework of green and sustainable chemistry, circular economy and resource efficiency, this book provides a cradle-to-cradle perspective. From potential feedstocks to recycling/reuse opportunities and the de-manufacture of adhesives and solvents, green chemistry principles are applied to all aspects of surface coating, printing, adhesive and sealant manufacture. This book is ideal for students, researchers and industrialists working in green sustainable chemistry, industrial coatings, adhesives, inks and printing technologies.







Kent and Riegel's Handbook of Industrial Chemistry and Biotechnology


Book Description

This substantially revised and updated classic reference offers a valuable overview and myriad details on current chemical processes, products, and practices. No other source offers as much data on the chemistry, engineering, economics, and infrastructure of the industry. The two volume Handbook serves a spectrum of individuals, from those who are directly involved in the chemical industry to others in related industries and activities. Industrial processes and products can be much enhanced through observing the tenets and applying the methodologies found in the book’s new chapters.




Handbook of Industrial Inkjet Printing


Book Description

Unique in its integration of individual topics to achieve a full-system approach, this book addresses all the aspects essential for industrial inkjet printing. After an introduction listing the industrial printing techniques available, the text goes on to discuss individual topics, such as ink, printheads and substrates, followed by metrology techniques that are required for reliable systems. Three iteration cycles are then described, including the adaptation of the ink to the printhead, the optimization of the ink to the substrate and the integration of machine manufacturing, monitoring, and data handling, among others. Finally, the book summarizes a number of case studies and success stories from selected areas, including graphics, printed electronics, and 3D printing as well a list of ink suppliers, printhead manufacturers and integrators. Practical hints are included throughout for a direct hands-on experience. Invaluable for industrial users and academics, whether ink developers or mechanical engineers, and working in areas ranging from metrology to intellectual property.