Author : C. H. Dowding
Publisher :
Page : 648 pages
File Size : 42,29 MB
Release : 1996
Category : Science
ISBN :
The entire field of construction-induced vibrations - including advances in earthquake engineering, nuclear blast protective design, and construction and mine blasting - is covered in this work. Frequency of vibration and strain form the foundation for the presentation of the material.
Author : Aiqun Li
Publisher : Springer Nature
Page : 677 pages
File Size : 25,9 MB
Release : 2020-03-11
Category : Technology & Engineering
ISBN : 303040790X
This book presents a comprehensive introduction to the field of structural vibration reduction control, but may also be used as a reference source for more advanced topics. The content is divided into four main parts: the basic principles of structural vibration reduction control, structural vibration reduction devices, structural vibration reduction design methods, and structural vibration reduction engineering practices. As the book strikes a balance between theoretical and practical aspects, it will appeal to researchers and practicing engineers alike, as well as graduate students.
Author : Hugo Bachmann
Publisher : Birkhäuser
Page : 248 pages
File Size : 37,18 MB
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 3034892314
Authors: Hugo Bachmann, Walter J. Ammann, Florian Deischl, Josef Eisenmann, Ingomar Floegl, Gerhard H. Hirsch, Günter K. Klein, Göran J. Lande, Oskar Mahrenholtz, Hans G. Natke, Hans Nussbaumer, Anthony J. Pretlove, Johann H. Rainer, Ernst-Ulrich Saemann, Lorenz Steinbeisser. Large structures such as factories, gymnasia, concert halls, bridges, towers, masts and chimneys can be detrimentally affected by vibrations. These vibrations can cause either serviceability problems, severely hampering the user's comfort, or safety problems. The aim of this book is to provide structural and civil engineers working in construction and environmental engineering with practical guidelines for counteracting vibration problems. Dynamic actions are considered from the following sources of vibration: - human body motions, - rotating, oscillating and impacting machines, - wind flow, - road traffic, railway traffic and construction work. The main section of the book presents tools that aid in decision-making and in deriving simple solutions to cases of frequently occurring "normal" vibration problems. Complexer problems and more advanced solutions are also considered. In all cases these guidelines should enable the engineer to decide on appropriate solutions expeditiously. The appendices of the book contain fundamentals essential to the main chapters.
Author : T. Balendra
Publisher : Springer Science & Business Media
Page : 156 pages
File Size : 29,13 MB
Release : 2012-12-06
Category : Technology & Engineering
ISBN : 1447120558
Recent advances in the development of high strength materials, coupled with more advanced computational methods and design procedures, have led to a new generation of tall and slender buildings. These structures are very sensitive to the most common dynamic loads; wind and earthquakes. The primary requirement for a successful design is to provide safety while taking into account serviceability requirements. This book provides a well-balanced and broad coverage of the information needed for the design of structural systems for wind- and earthquake-resistant buildings. It covers topics such as the basic concepts in structural dynamics and structural systems, the assessment of wind and earthquake loads acting on the system, the evaluation of the system response to such dynamic loads and the design for extreme loading. The text is generously illustrated and supported by numerical examples and will be of great interest to practising engineers and researchers in structural, civil and design engineering and also to architects. The author has drawn on his experience as a teacher, researcher and consultant.
Author : John Siwula
Publisher :
Page : 470 pages
File Size : 11,26 MB
Release : 2011
Category : Piling (Civil engineering)
ISBN :
Damage to structures due to vibrations from pile driving operations is of great concern to engineers. This research has stemmed from the need to address potential damage to concrete-filled pipe piles and recently placed concrete structures that could be affected by pile driving vibrations. The study will focus on two topics: (1) The attenuation of potentially damaging pile driving vibrations with distance from the source, and (2) The effects of distance and curing time of concrete on the quality (unconfined compressive strength) of recentlyplaced concrete exposed to pile driving vibrations. The effects of pile driving vibrations did not cause problems with concrete compressive strength except for the case where concrete had only cured for 4 to 6 hours before vibration.
Author : Cliff J. Schexnayder
Publisher : Transportation Research Board
Page : 108 pages
File Size : 47,54 MB
Release : 1999
Category : Best management practices (Pollution prevention)
ISBN : 9780309068550
This synthesis report describes current practice in mitigating nighttime construction nuisances such as noise, vibration, light, and dust. Roadway construction work is increasingly done at night to mediate traffic congestion; however, this trend also increases the potential for disturbing adjacent property owners. This report will be of interest to department of transportation (DOT) construction, design, and project engineers, and to those responsible for community relations. This report of the Transportation Research Board stresses the importance of informing project neighbors and establishing cooperative relations with the community as a first measure of successful mitigation. Examples show how project design can address construction nuisances by locating and sequencing construction operations to minimize their impact. Current practices used in source control, path control, and receptor control are described and documented in examples from the Boston Central Artery/Tunnel project and projects in Arizona and Salt Lake City, Utah. Appended materials provide sample specifications for mitigation of noise and dust control.
Author : Jean-François Semblat
Publisher : Iuss Press
Page : 510 pages
File Size : 24,13 MB
Release : 2009
Category : Technology & Engineering
ISBN :
Author : Osama A B Hassan
Publisher : World Scientific Publishing Company
Page : 972 pages
File Size : 32,35 MB
Release : 2009-06-24
Category : Architecture
ISBN : 9813107413
As a comprehensive reference dedicated to sound and vibration in buildings, Building Acoustics and Vibration addresses the basic and advanced principles that can be used to solve practical and theoretical problems typically encountered in building and architectural acoustic practices. In addition, physical and mathematical concepts are introduced and developed sufficiently to make this publication a self-contained and up-to-date source of information for readers. Building Acoustics and Vibration is a must-have textbook for engineering students, engineers, and consultants involved in the sound, vibrations and building environment. With comprehensibility and versatility in the presentation of knowledge, this highly anticipated publication will easily fill the gap in the literature of building engineering and sciences, which presently lacks an authoritative guide on the theoretical and practical aspects of building acoustics and vibration.
Author : Lewis L. Oriard
Publisher :
Page : 720 pages
File Size : 39,37 MB
Release : 2002
Category : Science
ISBN :
Author :
Publisher :
Page : 238 pages
File Size : 30,46 MB
Release : 1995
Category : Electric railroads
ISBN :
This manual provides direction for the preparation of noise and vibration sections of environmental documents for mass transportation projects. The manual has been developed in the interest of promoting quality and uniformity in assessments. It is expected to be used by people associated with or affected by the urban transit industry, including Federal Transit Administration (FTA) staff, grant applicants, consultants and the general public. Each of these groups has an interest in noise/vibration assessment, but not all have the need for all the details of the process. Consequently, this manual has been prepared to serve readers with varying levels of technical background and interests. It sets forth the basic concepts, methods and procedures for documenting the extent and severity of noise impacts from transit projects.
