Dams and Earthquakes


Book Description

Dams and Earthquakes deals with the association of earthquakes and large artificial lakes, particularly on the part that pore pressure plays in inducing earthquakes. The book also contains methods for recording seismic activity, before, during, and after the filling of reservoir dams through the installation of a network of portable seismographs. The text assesses the parameters and macroseismic effects of the Koyna earthquake in India in December 1967, as well as the instrumental and macroseismic data showing that the Koyna earthquake is a multiple seismic event. The book investigates the geology, hydrology, and seismicity of seismic reservoir sites, including three cases of induced seismicity after fluid injections in deep wells. A possible correlation between the reservoir level or volume of the injected fluid and the tremor frequency exists. The characteristic seismic features of reservoir associated earthquakes can reflect changes in the mechanical properties of rock masses near the reservoirs. The book also investigates the part played by increased pore-fluid pressures in triggering the earthquakes at Denver, Rangely, Kariba, Kremasta and Koyna. The UNESCO Working Group on "Seismic Phenomena Associated with Large Reservoirs" recommends the adoption of a two-phase planning in instrumental studies and surveys at sites to be used for large reservoirs. The book can be beneficial for meteorologists, environmentalists, geologists, civil engineers, structural engineers, or for officers of river and lake authorities.




Safety of Dams


Book Description

From earth tectonics and meteorology to risk, responsibility, and the role of government, this comprehensive and detailed book reviews current practices in designing dams to withstand extreme hydrologic and seismic events. Recommendations for action and for further research to improve dam safety evaluations are presented.




Earthquake Engineering for Concrete Dams


Book Description

A comprehensive guide to modern-day methods for earthquake engineering of concrete dams Earthquake analysis and design of concrete dams has progressed from static force methods based on seismic coefficients to modern procedures that are based on the dynamics of dam–water–foundation systems. Earthquake Engineering for Concrete Dams offers a comprehensive, integrated view of this progress over the last fifty years. The book offers an understanding of the limitations of the various methods of dynamic analysis used in practice and develops modern methods that overcome these limitations. This important book: Develops procedures for dynamic analysis of two-dimensional and three-dimensional models of concrete dams Identifies system parameters that influence their response Demonstrates the effects of dam–water–foundation interaction on earthquake response Identifies factors that must be included in earthquake analysis of concrete dams Examines design earthquakes as defined by various regulatory bodies and organizations Presents modern methods for establishing design spectra and selecting ground motions Illustrates application of dynamic analysis procedures to the design of new dams and safety evaluation of existing dams. Written for graduate students, researchers, and professional engineers, Earthquake Engineering for Concrete Dams offers a comprehensive view of the current procedures and methods for seismic analysis, design, and safety evaluation of concrete dams.




Reservoir Induced Earthquakes


Book Description

Since the publication of the first Dams and Earthquakes in 1976, the phenomenon of reservoir induced seismicity (RIS) is more widely understood. There are now over 70 known cases of reservoir-induced earthquakes. These damaging earthquakes have occurred in China, Kariba, Zambia, Greece, Kremasta, Koyna, India, California and elsewhere. The December 10, 1967 Koyna earthquake, with a magnitude of 6.3 claimed over 200 lives, injured 1500 and rendered thousands homeless. Because of the ever increasing demand for dam construction, for power generation, irrigation, and flood control, it is necessary to understand how, where and why induced earthquakes occur. Recent research has demonstrated that when suitable physical measurements of rock properties are made, a fairly accurate model of induced seismicity can be obtained. It appears possible to mitigate the hazard of RIS through manipulation of reservoir levels.The present volume is an updated and revised follow-up to the 1976 book. It presents an overview of the world-wide distribution of RIS, the salient aspects of RIS at specific reservior sites where earthquakes of M〉5 have occurred and where new results on RIS are reported, and how they differ from the normal earthquake sequences. An examination of the non-occurrence of induced earthquakes in the vicinity of the Himalyan reservoirs and other related topics such as: the size of the largest induced earthquake that could occur at a given reservoir site; prediction of induced earthquakes; and dam site investigations which should be completed during the planning and operation of the reservoirs are also included.




Position Paper Dam Safety and Earthquakes


Book Description

Earthquakes have always been a significant aspect of the design and safety of dams. This position paper deals with the seismic safety of large dams, based on experiences with large earthquakes in Japan (Tohoku earthquake, 2011, Richter magnitude 9.0), in China (Wenchuan earthquake, 2008, Richter magnitude 8.0) and in Chile (Maule earthquake, 2010, Richter magnitude 8.8). It presents ways to prevent key aspects of large dam failure under severe seismic conditions with a focus on design instead of on earthquake prediction. This is done by considering the prevention of uncontrolled rapid release of water of a storage dam under full reservoir conditions in relation to expected seismic conditions. This position paper is composed by the Committee on Seismic Aspects of Dam Design of The International Committee of Large Dams. Les tremblements de terre ont toujours été un aspect important de la conception et de la sécurité des barrages. Ce document de synthèse traite de la sécurité sismique des grands barrages, en se fondant sur l’expérience acquise lors de grands séismes au Japon (séisme de Tohoku, 2011, magnitude 9,0 sur l’échelle de Richter), en Chine (séisme de Wenchuan, 2008, magnitude 8,0 sur l’échelle de Richter) et au Chili (séisme de Maule, 2010, magnitude 8,8 sur l’échelle de Richter). Il présente des moyens de prévenir les aspects clés de la défaillance des grands barrages dans des conditions sismiques sévères en mettant l’accent sur la conception plutôt que sur la prévision des séismes. Pour ce faire, on examine la prévention d’une libération rapide et incontrôlée de l’eau d’un barrage de stockage dans des conditions de réservoir plein par rapport aux conditions sismiques prévues. Cet argumentaire est composé par le Comité sur les Aspects Sismiques des Projets de Barrages de la Commission Internationale des Grands Barrages.




Earthquake Engineering for Concrete Dams


Book Description

The hazard posed by large dams has long been known. Although no concrete dam has failed as a result of earthquake activity, there have been instances of significant damage. Concerns about the seismic safety of concrete dams have been growing recently because the population at risk in locations downstream of major dams continues to expand and because the seismic design concepts in use at the time most existing dams were built were inadequate. In this book, the committee evaluates current knowledge about the earthquake performance of concrete dams, including procedures for investigating the seismic safety of such structures. Earthquake Engineering for Concrete Dams specifically informs researchers about state-of-the-art earthquake analysis of concrete dams and identifies subject areas where additional knowledge is needed.




Advanced Dam Engineering for Design, Construction, and Rehabilitation


Book Description

The present state of the art of dam engineering has been ronmental, and political factors, which, though important, attained by a continuous search for new ideas and methods are covered in other publications. while incorporating the lessons of the past. In the last 20 The rapid progress in recent times has resulted from the years particularly there have been major innovations, due combined efforts of engineers and associated scientists, as largely to a concerted effort to blend the best of theory and exemplified by the authorities who have contributed to this practice. Accompanying these achievements, there has been book. These individuals have brought extensive knowledge a significant trend toward free interchange among the pro to the task, drawn from experience throughout the world. fessional disciplines, including open discussion of prob With the convergence of such distinguished talent, the op lems and their solutions. The inseparable relationships of portunity for accomplishment was substantial. I gratefully hydrology, geology, and seismology to engineering have acknowledge the generous cooperation of these writers, and been increasingly recognized in this field, where progress am indebted also to other persons and organizations that is founded on interdisciplinary cooperation. have allowed reference to their publications; and I have This book presents advances in dam engineering that attempted to acknowledge this obligation in the sections have been achieved in recent years or are under way. At where the material is used. These courtesies are deeply ap tention is given to practical aspects of design, construction, preciated.




The Scaled Boundary Finite Element Method


Book Description

An informative look at the theory, computer implementation, and application of the scaled boundary finite element method This reliable resource, complete with MATLAB, is an easy-to-understand introduction to the fundamental principles of the scaled boundary finite element method. It establishes the theory of the scaled boundary finite element method systematically as a general numerical procedure, providing the reader with a sound knowledge to expand the applications of this method to a broader scope. The book also presents the applications of the scaled boundary finite element to illustrate its salient features and potentials. The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation covers the static and dynamic stress analysis of solids in two and three dimensions. The relevant concepts, theory and modelling issues of the scaled boundary finite element method are discussed and the unique features of the method are highlighted. The applications in computational fracture mechanics are detailed with numerical examples. A unified mesh generation procedure based on quadtree/octree algorithm is described. It also presents examples of fully automatic stress analysis of geometric models in NURBS, STL and digital images. Written in lucid and easy to understand language by the co-inventor of the scaled boundary element method Provides MATLAB as an integral part of the book with the code cross-referenced in the text and the use of the code illustrated by examples Presents new developments in the scaled boundary finite element method with illustrative examples so that readers can appreciate the significant features and potentials of this novel method—especially in emerging technologies such as 3D printing, virtual reality, and digital image-based analysis The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation is an ideal book for researchers, software developers, numerical analysts, and postgraduate students in many fields of engineering and science.




Seismic Performance Analysis of Concrete Gravity Dams


Book Description

This book evaluates the seismic performance of concrete gravity dams, considering the effects of strong motion duration, mainshock-aftershock seismic sequence, and near-fault ground motion. It employs both the extended finite element method (XFEM) and concrete damaged plasticity (CDP) models to characterize the mechanical behavior of concrete gravity dams under strong ground motions, including the dam-reservoir-foundation interaction. In addition, it discusses the effects of the initial crack, earthquake direction, and cross-stream seismic excitation on the nonlinear dynamic response to strong ground motions, and on the damage-cracking risk of concrete gravity dams. This book provides a theoretical basis for the seismic performance evaluation of high dams, and can also be used as a reference resource for researchers and graduate students engaged in the seismic design of high dams.




Geotechnical Engineering of Dams


Book Description

This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.