Book Description

Blunt-forebody pressure data are used to study the behavior of the NASA Dryden Flight Research Center flush airdata sensing (FADS) pressure model and solution algorithm. The model relates surface pressure measurements to the airdata state. Spliced from the potential flow solution for uniform flow over a sphere and the modified Newtonian impact theory, the model was shown to apply to a wide range of blunt-forebody shapes and Mach numbers. Calibrations of a sphere, spherical cones, a Rankine half body, and the F-14, F/A-18, X-33, X-34, and X-38 configurations are shown. The three calibration parameters are well-behaved from Mach 0.25 to Mach 5.0, an angle-of-attack range extending to greater than 30 deg, and an angle-of-sideslip range extending to greater than 15 deg. Contrary to the sharp calibration changes found on traditional pitot-static systems at transonic speeds, the FADS calibrations are smooth, monotonic functions of Mach number and effective angles of attack and sideslip. Because the FADS calibration is sensitive to pressure port location, detailed measurements of the actual pressure port locations on the flight vehicle are required and the wind-tunnel calibration model should have pressure ports in similar locations. The procedure for calibrating a FADS system is outlined.Cobleigh, Brent R. and Whitmore, Stephen A. and Haering, Edward A., Jr. and Borrer, Jerry and Roback, V. EricArmstrong Flight Research Center; Johnson Space Center; Langley Research CenterPROCEDURES; CALIBRATING; FOREBODIES; MATHEMATICAL MODELS; ALGORITHMS; POTENTIAL FLOW; PRESSURE MEASUREMENT; NEWTON THEORY; ANGLE OF ATTACK; DETECTION; F-14 AIRCRAFT; MACH NUMBER; POSITION (LOCATION); SENSITIVITY; SHAPES; SIDESLIP; SPHERES; TRANSONIC SPEED; UNIFORM FLOW; WIND TUNNEL CALIBRATION; X-33 REUSABLE LAUNCH VEHICLE; X-34 REUSABLE LAUNCH VEHICLE; X-38 CREW RETURN VEHICLE