Design of Fastenings for Use in Concrete


Book Description

The European pre-standard CEN/TS 1992-4 for the design of fastenings by means of headed studs, anchor channels as well as post-installed mechanical and chemical anchors is ready for use. The background and interpretation of the provisions related to the determination of actions and resistances based on limit state design, durability, fire resistance, fatigue and earthquake actions as required by CEN/TS 1992 are described in detail. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.




Anchorage in Concrete Construction


Book Description

Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.










Design of anchorages in concrete


Book Description

Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.




Design of Fastenings for Use in Concrete


Book Description

Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis, Bonding, Adhesives




Fastenings to Concrete and Masonry Structures


Book Description

Modern fastening techniques are increasingly being used to transfer loads into concrete and masonry structures. This book aims to compile and compare research on the behaviour of fastening systems. It also proposes an approach to the design of fastenings based on empirical and theoretical models.




Design of Concrete Structures


Book Description




Connections Between Steel and Concrete


Book Description




Commentary to EN 1992-4 - Design for Fastenings for use in Concrete


Book Description

The information in DAfStb-Heft 615 aims to simplify the practice, understanding and application of EN-1992-4 using explanatory notes and the presentation of scientific background. The first part contains commentary to the content of the standard, advice on deriving information from certain provisions, supplementary rules of application and several design examples. The second part covers the technical reports referred to in the standard. The information in the first and second parts of this manual was compiled by the DAfStb's technical subcommittee "Fastening Technology" and adopted by way of a consensus procedure similar to that used for standards. This manual's third part contains contributions prepared by members of the subcommittee "Fastening Technology" on their own initiative. This contributions provide further explanatory notes to selected topics, mainly for cases of applications which are not covered within EN 1992-4.