Design of Low Power Integrated Radios for Emerging Standards


Book Description

This book describes novel and disruptive architecture and circuit design techniques, toward the realization of low-power, standard-compliant radio architectures and silicon implementation of the circuits required for a variety of leading-edge applications. Readers will gain an understanding of the circuit level challenges that exist for low power radios, compatible with the IEEE 802.15.6 standard. The authors discuss current techniques to address some of these challenges, helping readers to understand the state-of-the-art, and to address the various, open research problems that exist with respect to realizing low power radios. Enables readers to face challenging bottleneck in low power radio design, with state-of-the-art, circuit-level design techniques; Provides readers with basic knowledge of circuits suitable for low power radio circuits compatible with the IEEE 802.15.6 standard; Discusses new and emerging architectures and circuit techniques, enabling applications such as body area networks and internet of things.




Ultra-Low Power Integrated Circuit Design


Book Description

This book describes the design of CMOS circuits for ultra-low power consumption including analog, radio frequency (RF), and digital signal processing circuits (DSP). The book addresses issues from circuit and system design to production design, and applies the ultra-low power circuits described to systems for digital hearing aids and capsule endoscope devices. Provides a valuable introduction to ultra-low power circuit design, aimed at practicing design engineers; Describes all key building blocks of ultra-low power circuits, from a systems perspective; Applies circuits and systems described to real product examples such as hearing aids and capsule endoscopes.




Low Power Emerging Wireless Technologies


Book Description

Advanced concepts for wireless communications offer a vision of technology that is embedded in our surroundings and practically invisible, but present whenever required. Although the use of deep submicron CMOS processes allows for an unprecedented degree of scaling in digital circuitry, it complicates the implementation and integration of traditional RF circuits. The requirement for long operating life under limited energy supply also poses severe design constraints, particularly in critical applications in commerce, healthcare, and security. These challenges call for innovative design solutions at the circuit and system levels. Low Power Emerging Wireless Technologies addresses the crucial scientific and technological challenges for the realization of fully integrated, highly efficient, and cost-effective solutions for emerging wireless applications. Get Insights from the Experts on Wireless Circuit Design The book features contributions by top international experts in wireless circuit design representing both industry and academia. They explore the state of the art in wireless communication for 3G and 4G cellular networks, millimeter-wave applications, wireless sensor networks, and wireless medical technologies. The emphasis is on low-power wireless applications, RF building blocks for wireless applications, and short-distance and beam steering. Topics covered include new opportunities in body area networks, medical implants, satellite communications, automobile radar detection, and wearable electronics. Exploit the Potential behind Emerging Green Wireless Technologies A must for anyone serious about future wireless technologies, this multidisciplinary book discusses the challenges of emerging power-efficient applications. Written for practicing engineers in the wireless communication field who have some experience in integrated circuits, it is also a valuable resource for graduate students.




FCC's Low Power FM


Book Description




Radio Design in Nanometer Technologies


Book Description

Radio Design in Nanometer Technologies is the first volume that looks at the integrated radio design problem as a "piece of a big puzzle", namely the entire chipset or single chip that builds an entire wireless system. This is the only way to successfully design radios to meet the stringent demands of today’s increasingly complex wireless systems.




Design of Ultra-Low Power Impulse Radios


Book Description

This book covers the fundamental principles behind the design of ultra-low power radios and how they can form networks to facilitate a variety of applications within healthcare and environmental monitoring, since they may operate for years off a small battery or even harvest energy from the environment. These radios are distinct from conventional radios in that they must operate with very constrained resources and low overhead. This book provides a thorough discussion of the challenges associated with designing radios with such constrained resources, as well as fundamental design concepts and practical approaches to implementing working designs. Coverage includes integrated circuit design, timing and control considerations, fundamental theory behind low power and time domain operation, and network/communication protocol considerations.




Design and Implementation of Fully-Integrated Inductive DC-DC Converters in Standard CMOS


Book Description

CMOS DC-DC Converters aims to provide a comprehensive dissertation on the matter of monolithic inductive Direct-Current to Direct-Current (DC-DC) converters. For this purpose seven chapters are defined which will allow the designer to gain specific knowledge on the design and implementation of monolithic inductive DC-DC converters, starting from the very basics.




Low-Voltage Low-Power Analog Integrated Circuits


Book Description

Low-Voltage Low-Power Analog Integrated Circuits brings together in one place important contributions and state-of-the-art research results in this rapidly advancing area. Low-Voltage Low-Power Analog Integrated Circuits serves as an excellent reference, providing insight into some of the most important issues in the field.




Computer Aided Systems Theory -- EUROCAST 2013


Book Description

The two-volume set LNCS 8111 and LNCS 8112 constitute the papers presented at the 14th International Conference on Computer Aided Systems Theory, EUROCAST 2013, held in February 2013 in Las Palmas de Gran Canaria, Spain. The total of 131 papers presented were carefully reviewed and selected for inclusion in the books. The contributions are organized in topical sections on modelling biological systems; systems theory and applications; intelligent information processing; theory and applications of metaheuristic algorithms; model-based system design, verification and simulation; process modeling simulation and system optimization; mobile and autonomous transportation systems; computer vision, sensing, image processing and medical applications; computer-based methods and virtual reality for clinical and academic medicine; digital signal processing methods and applications; mechatronic systems, robotics and marine robots; mobile computing platforms and technologies; systems applications.




CMOS PLLs and VCOs for 4G Wireless


Book Description

CMOS PLLs and VCOs for 4G Wireless is the first book devoted to the subject of CMOS PLL and VCO design for future broadband 4th generation wireless devices. These devices will be handheld-centric, requiring very low power consumption and small footprint. They will be able to work across multiple bands and multiple standards covering WWAN (GSM,WCDMA) ,WLAN(802.11 a/b/g) and WPAN(Bluetooth) with different modulations, channel bandwidths , phase noise requirements ,etc. As such, this book discusses design, modeling and optimization techniques for low power fully integrated broadband PLLs and VCOs in deep submicron CMOS. First, the PLL and VCO performances are studied in the context of the chosen multi-band multi-standard, radio architecture and the adopted frequency plan. Next a thorough study of the design requirements for broadband PLL/VCO design is conducted together with modeling techniques for noise sources in a PLL and VCO focusing on optimization of integrated phase noise for multi-carrier OFDM 64-QAM type applications. Design examples for multi-standard 802.111a/b/g as well as for GSM/WCDMA are fully described and experimental results from 0.18 micron CMOS test chips have demonstrated the validity of the proposed design and optimization techniques. Equally important the work describes techniques for robust high volume production of RF radios in general and for integrated PLL/VCO design in particular including issues such as supply sensitivity, ground bounce and calibration mechanisms. CMOS PLLS and VCOs for 4G Wireless will be of interest to graduate students in electrical and computer engineering, design managers and RFIC designers in wireless semiconductor companies.