Design of Very High-Frequency Multirate Switched-Capacitor Circuits


Book Description

Design of Very High-Frequency Multirate Switched-Capacitor Circuits presents the theory and the corresponding CMOS implementation of the novel multirate sampled-data analog interpolation technique which has its great potential on very high-frequency analog frond-end filtering due to its inherent dual advantage of reducing the speed of data-converters and DSP core together with the specification relaxation of the post continuous-time filtering. This technique completely eliminates the traditional phenomenon of sampled-and-hold frequency-shaping at the lower input sampling rate. Also, in order to tackle physical IC imperfections at very high frequency, the state-of-the-art circuit design and layout techniques for high-speed Switched-Capacitor (SC) circuits are comprehensively discussed: -Optimum circuit architecture tradeoff analysis -Simple speed and power trade-off analysis of active elements -High-order filtering response accuracy with respect to capacitor-ratio mismatches -Time-interleaved effect with respect to gain and offset mismatch -Time-interleaved effect with respect to timing-skew and random jitter with non-uniformly holding -Stage noise analysis and allocation scheme -Substrate and supply noise reduction -Gain-and offset-compensation techniques -High-bandwidth low-power amplifier design and layout -Very low timing-skew multiphase generation Two tailor-made optimum design examples in CMOS are presented. The first one achieves a 3-stage 8-fold SC interpolating filter with 5.5MHz bandwidth and 108MHz output sampling rate for a NTSC/PAL CCIR 601 digital video at 3 V. Another is a 15-tap 57MHz SC FIR bandpass interpolating filter with 4-fold sampling rate increase to 320MHz and the first-time embedded frequency band up-translation for DDFS system at 2.5V. The corresponding chip prototype achieves so far the highest operating frequency, highest filter order and highest center frequency with highest dynamic range under the lowest supply voltage when compared to the previously reported high-frequency SC filters in CMOS.




Multirate Switched-Capacitor Circuits for 2-D Signal Processing


Book Description

Multirate Switched-Capacitor Circuits for 2-D Signal Processing introduces the concepts of analog multirate signal processing for the efficient implementation of two-dimensional (2-D) filtering in integrated circuit form, particularly from the viewpoints of silicon area and power dissipation. New 2-D switched-capacitor (SC) networks and design techniques are presented, both with finite impulse response (FIR) and infinite impulse response (IIR) with separable denominator polynomial, which offer simpler and more systematic synthesis procedures than currently available design techniques for 2-D analog filters. Since they are in the discrete-time domain, the book can be also referred to the digital multirate signal processing. A 2-D SC image processor that realizes both (2 x 2)nd-order Butterworth lowpass and highpass filtering functions for video image signals was realized as a prototype integrated circuit implemented in 1.0-mum CMOS technology. The experimental characterization of this prototype chip demonstrated the feasibility of real-time analog multirate 2-D image processing with equivalent 8-bits accuracy, using only 2.5 x 3.0 mm2 of silicon area and dissipating as little as 85 mW at 5V supply and 18 MHz sampling rate. This indicates that for moderate accuracy and low to moderate complexity of the filtering function, a fully multirate analog implementation has a potential to achieve a more competitive implementation than an alternative digital VLSI implementation. However, for high accuracy and/or higher processing complexity, not only the relative overhead cost of the front-end and back-end converters will diminish but also the implementation of the processing core in digital VLSI will benefit more of technology scaling to achieve higher density of integration. Multirate Switched-Capacitor Circuits for 2-D Signal Processing is essential reading for practicing analog design engineers and researchers in the field. It is also suitable as a text for an advanced course on the subject.




Multirate and Multiphase Switched-capacitor Circuits


Book Description

Written by an author with extensive practical experience of applying the techniques, this book is aimed at advanced students and researchers as well as professional design engineers. The text focuses on finite impulse response (FIR) filter structures and on infinite impulse response (IIR) SC filters which simulate classical lossless circuits . It includes coverage of the so-called pseudo-lossless SC circuits and especially multirate SC circuits with recovery of the effective pseudo-energy. There is also discussion of other promising approaches to the design of SC circuits; special attention has been paid to the analysis of multirate and multiphase SC circuits using signal flow graphs.




Switched-Capacitor Techniques for High-Accuracy Filter and ADC Design


Book Description

This book proposes alternative switched capacitor techniques which allow the achievement of higher intrinsic analogue functional accuracy than previously possible in such application areas as analogue filter and ADC design. The validity of the concepts developed and analyzed in Switched-Capacitor Techniques for High-Accuracy Filter and ADC Design has been demonstrated in practice with the design of CMOS SC bandpass filters and algorithmic ADC stages.




A Short History of Circuits and Systems


Book Description

After an overview of major scientific discoveries of the 18th and 19th centuries, which created electrical science as we know and understand it and led to its useful applications in energy conversion, transmission, manufacturing industry and communications, this Circuits and Systems History book fills a gap in published literature by providing a record of the many outstanding scientists, mathematicians and engineers who laid the foundations of Circuit Theory and Filter Design from the mid-20th Century. Additionally, the book records the history of the IEEE Circuits and Systems Society from its origins as the small Circuit Theory Group of the Institute of Radio Engineers (IRE), which merged with the American Institute of Electrical Engineers (AIEE) to form IEEE in 1963, to the large and broad-coverage worldwide IEEE Society which it is today. This second edition, commemorating the 75th anniversary of the Circuits and Systems Society, builds upon the first edition's success by expanding the scope of specific chapters, introducing new topics of relevance, and integrating feedback from readers and experts in the field, reflecting the evolving landscape of Circuits and Systems alongside the evolution of the professional society. Many authors from many countries contributed to the creation of this book, working to a very tight time schedule. The result is a substantial contribution to their enthusiasm and expertise, which it is hoped readers will find both interesting and useful. It is certain that in such a book, omission will be found, and in the space and time available, much valuable material had to be left out. It is hoped that this book will stimulate an interest in the marvelous heritage and contributions of the many outstanding people who worked in the Circuits and Systems area.







Switched Capacitor Circuits


Book Description

The objective of the book is to provide sufficient background and understand ing to enable its readers to design and apply switched capacitor circuits whether these are to be implemented as discrete circuits or by MOS technol ogy. Since this is the first book devoted entirely to the subject of switched capacitor circuits, it has no pattern to follow. Fortunately, it was developed in an environment where many of the circuits and concepts it discusses could actually be integrated as MOS integrated circuits. It is hoped that this environ ment has created a selection process that has enhanced the contents. Switched capacitor circuits provide an example of the influence that technol ogy can have on the field of electrical engineering. Only seven years ago, the problem of building analog circuits and systems using standard MOS technology was still unsolved. Although analog circuits and systems were implemented by means of integrated circuit technology, they were neither economical nor competitive. The act of combining analog sampled data tech niques with MOS technology has solved this difficulty. As a result, the field of switched capacitor circuits has developed into maturity in a relatively short period of time.




Demystifying Switched Capacitor Circuits


Book Description

This book helps engineers to grasp fundamental theories and design principles by presenting physical and intuitive explanations of switched-capacitor circuits. Numerous circuit examples are discussed and the author emphasizes the most important and fundamental principles involved in implementing state-of-the-art switched-capacitor circuits for analog signal processing and power management applications. Throughout the book, the author presents numerous step-by-step tutorials and gives practical design examples.While some quantitative analysis is necessary to understand underlying concepts, tedious mathematical equations and formal proofs are avoided. An intuitive appreciation for switched-capacitor circuits is achieved.Much of the existing information on contemporary switched-capacitor circuit applications is in the form of applications notes and data sheets for various switched-capacitor ICs. This book compiles such information in a single volume and coherently organizes and structures it.The author has his own website at www.mingliangliu.com * Step-by-step tutorials which emphasize the most fundamental principals of switched-capacitor circuits * Few tedious mathematical equations * The first easy-to-understand compilation on this subject--most information available is not very cohesive




Design of Low-Voltage CMOS Switched-Opamp Switched-Capacitor Systems


Book Description

This volume emphasizes the design and development of advanced switched-opamp architectures and techniques for low-voltage low-power switched-capacitor systems. It presents a novel multi-phase switched-opamp technique together with new system architectures that are critical in improving significantly the performance of switched-capacitor systems at low supply voltages.




MOS Switched-Capacitor and Continuous-Time Integrated Circuits and Systems


Book Description

The purpose of this book is to present analysis and design principles, procedures and techniques of analog integrated circuits which are to be implemented in MOS (metal oxide semiconductor) technology. MOS technology is becoming dominant in the realization of digital systems, and its use for analog circuits opens new pos sibilities for the design of complex mixed analog/digital VLSI (very large scale in tegration) chips. Although we are focusing attention in this book principally on circuits and systems which can be implemented in CMOS technology, many con siderations and structures are of a general nature and can be adapted to other promising and emerging technologies, namely GaAs (Gallium Arsenide) and BI MOS (bipolar MOS, i. e. circuits which combine both bipolar and CMOS devices) technology. Moreover, some of the structures and circuits described in this book can also be useful without integration. In this book we describe two large classes of analog integrated circuits: • switched capacitor (SC) networks, • continuous-time CMOS (unswitched) circuits. SC networks are sampled-data systems in which electric charges are transferred from one point to another at regular discrete intervals of time and thus the signal samples are stored and processed. Other circuits belonging to this class of sampled-data systems are charge transfer devices (CTD) and charge coupled dev ices (CCD). In contrast to SC circuits, continuous-time CMOS circuits operate continuously in time. They can be considered as subcircuits or building blocks (e. g.