Designing Embedded Systems with the SIGNAL Programming Language


Book Description

I am very pleased to play even a small part in the publication of this book on the SIGNAL language and its environment POLYCHRONY. I am sure it will be a s- ni?cant milestone in the development of the SIGNAL language, of synchronous computing in general, and of the data?ow approach to computation. In data?ow, the computation takes place in a producer–consumer network of - dependent processing stations. Data travels in streams and is transformed as these streams pass through the processing stations (often called ?lters). Data?ow is an attractive model for many reasons, not least because it corresponds to the way p- duction,transportation,andcommunicationare typicallyorganizedin the real world (outside cyberspace). I myself stumbled into data?ow almost against my will. In the mid-1970s, Ed Ashcroft and I set out to design a “super” structured programming language that, we hoped, would radically simplify proving assertions about programs. In the end, we decided that it had to be declarative. However, we also were determined that iterative algorithms could be expressed directly, without circumlocutions such as the use of a tail-recursive function. The language that resulted, which we named LUCID, was much less traditional then we would have liked. LUCID statements are equations in a kind of executable temporallogic thatspecifythe (time)sequencesof variablesinvolvedin aniteration.




Making Embedded Systems


Book Description

Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.




Mixed-Signal Embedded Systems Design


Book Description

This textbook introduces readers to mixed-signal, embedded design and provides, in one place, much of the basic information to engage in serious mixed-signal design using Cypress' PSoC. Designing with PSoC technology can be a challenging undertaking, especially for the novice. This book brings together a wealth of information gathered from a large number of sources and combines it with the fundamentals of mixed-signal, embedded design, making the PSoC learning curve ascent much less difficult. The book covers, sensors, digital logic, analog components, PSoC peripherals and building blocks in considerable detail, and each chapter includes illustrative examples, exercises, and an extensive bibliography.




Fast and Effective Embedded Systems Design


Book Description

Fast and Effective Embedded Systems Design is a fast-moving introduction to embedded system design, applying the innovative ARM mbed and its web-based development environment. Each chapter introduces a major topic in embedded systems, and proceeds as a series of practical experiments, adopting a "learning through doing" strategy. Minimal background knowledge is needed. C/C++ programming is applied, with a step-by-step approach which allows the novice to get coding quickly. Once the basics are covered, the book progresses to some "hot" embedded issues – intelligent instrumentation, networked systems, closed loop control, and digital signal processing. Written by two experts in the field, this book reflects on the experimental results, develops and matches theory to practice, evaluates the strengths and weaknesses of the technology or technique introduced, and considers applications and the wider context. Numerous exercises and end of chapter questions are included. - A hands-on introduction to the field of embedded systems, with a focus on fast prototyping - Key embedded system concepts covered through simple and effective experimentation - Amazing breadth of coverage, from simple digital i/o, to advanced networking and control - Applies the most accessible tools available in the embedded world - Supported by mbed and book web sites, containing FAQs and all code examples - Deep insights into ARM technology, and aspects of microcontroller architecture - Instructor support available, including power point slides, and solutions to questions and exercises




Programming Embedded Systems


Book Description

Authored by two of the leading authorities in the field, this guide offers readers the knowledge and skills needed to achieve proficiency with embedded software.




Introduction to Embedded Systems, Second Edition


Book Description

An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.




Embedded System Design


Book Description

This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.




Embedded Signal Processing with the Micro Signal Architecture


Book Description

This is a real-time digital signal processing textbook using the latest embedded Blackfin processor Analog Devices, Inc (ADI). 20% of the text is dedicated to general real-time signal processing principles. The remaining text provides an overview of the Blackfin processor, its programming, applications, and hands-on exercises for users. With all the practical examples given to expedite the learning development of Blackfin processors, the textbook doubles as a ready-to-use user's guide. The book is based on a step-by-step approach in which readers are first introduced to the DSP systems and concepts. Although, basic DSP concepts are introduced to allow easy referencing, readers are recommended to complete a basic course on "Signals and Systems" before attempting to use this book. This is also the first textbook that illustrates graphical programming for embedded processor using the latest LabVIEW Embedded Module for the ADI Blackfin Processors. A solutions manual is available for adopters of the book from the Wiley editorial department.




Embedded Systems


Book Description

Nowadays, embedded systems - computer systems that are embedded in various kinds of devices and play an important role of specific control functions, have permeated various scenes of industry. Therefore, we can hardly discuss our life or society from now onwards without referring to embedded systems. For wide-ranging embedded systems to continue their growth, a number of high-quality fundamental and applied researches are indispensable. This book contains 13 excellent chapters and addresses a wide spectrum of research topics of embedded systems, including parallel computing, communication architecture, application-specific systems, and embedded systems projects. Embedded systems can be made only after fusing miscellaneous technologies together. Various technologies condensed in this book as well as in the complementary book "Embedded Systems - Theory and Design Methodology", will be helpful to researchers and engineers around the world.




Embedded System Design with ARM Cortex-M Microcontrollers


Book Description

This textbook introduces basic and advanced embedded system topics through Arm Cortex M microcontrollers, covering programmable microcontroller usage starting from basic to advanced concepts using the STMicroelectronics Discovery development board. Designed for use in upper-level undergraduate and graduate courses on microcontrollers, microprocessor systems, and embedded systems, the book explores fundamental and advanced topics, real-time operating systems via FreeRTOS and Mbed OS, and then offers a solid grounding in digital signal processing, digital control, and digital image processing concepts — with emphasis placed on the usage of a microcontroller for these advanced topics. The book uses C language, “the” programming language for microcontrollers, C++ language, and MicroPython, which allows Python language usage on a microcontroller. Sample codes and course slides are available for readers and instructors, and a solutions manual is available to instructors. The book will also be an ideal reference for practicing engineers and electronics hobbyists who wish to become familiar with basic and advanced microcontroller concepts.