Digital Electronics and Laboratory Computer Experiments


Book Description

Science undergraduates have come to accept the use of computers as commonplace. The daily use of portable sophisticated electronic calculators (some of them rivaling general-purpose minicomputers in their capa bi li ti es) has hastened this development. Over the past several years, computer assisted experimentation has assumed an important role in the experimental laboratory. Mini- and microcomputer systems have become an important part of the physical scientist's array of analytical instruments. Prompted by our beliefthat this was an inevitable development, we began several years aga to develop the curricular materials presented in this manual. At the outset, several objectives seemed important to uso First, insofar as possible, the experiments included should be thoroughly tested and error free. Second, they should be compatible with a variety of laboratory computer, data-acquisition, and control systems. Third, little or no previous background in either electronics or programming should be necessary. (Of course, such background would be advantageous. ) To satisfy these objectives, we decided to adopt a widespread high-level computer language, BASIC, suitably modified for the purpose. Furthermore, we have purposely avoided specifying any particular system or equipment. Rather, the functional characteristics of both hardware and software required are stipulated. The experiments have been developed using Varian 620 and Hewlett-Packard 2100 series computers, but we believe they are readily transferable to other commonly available computer systems with a minimum of difficulty.







Digital Electronics


Book Description




ELECTRONICS LAB MANUAL (VOLUME 2)


Book Description

This book is evolved from the experience of the author who taught all lab courses in his three decades of teaching in various universities in India. The objective of this lab manual is to provide information to undergraduate students to practice experiments in electronics laboratories. This book covers 118 experiments for linear/analog integrated circuits lab, communication engineering lab, power electronics lab, microwave lab and optical communication lab. The experiments described in this book enable the students to learn: • Various analog integrated circuits and their functions • Analog and digital communication techniques • Power electronics circuits and their functions • Microwave equipment and components • Optical communication devices This book is intended for the B.Tech students of Electronics and Communication Engineering, Electrical and Electronics Engineering, Biomedical Electronics, Instrumentation and Control, Computer Science, and Applied Electronics. It is designed not only for engineering students, but can also be used by BSc/MSc (Physics) and Diploma students. KEY FEATURES • Contains aim, components and equipment required, theory, circuit diagram, pin-outs of active devices, design, tables, graphs, alternate circuits, and troubleshooting techniques for each experiment • Includes viva voce and examination questions with their answers • Provides exposure on various devices TARGET AUDIENCE • B.Tech (Electronics and Communication Engineering, Electrical and Electronics Engineering, Biomedical Electronics, Instrumentation and Control, Computer Science, and Applied Electronics) • BSc/MSc (Physics) • Diploma (Engineering)




Computers in Analytical Chemistry


Book Description

This text is primarily intended for readers who have some background in chemistry and who wish to find out more about the ways in which computers and electronics are influencing the techniques of observing chemical systems, the acquisition of data, its storage, and its transmission from one location to another. Many important concepts - such as interfacing, data collection, data bases, information services and computer networks - are covered in an easily assimilated and comprehensive way.




Digital Electronics Laboratory Experiments


Book Description

This manual offers an easy-to-read, easy-to-follow approach to digital fundamentals through the use of Complex Programmable Logic Devices (CPLDs). The use of advanced logic device technology prepares readers for using an industry-standard design environment. The first shorter section of the book contains a set of lab jobs using a single TTL chip: the 74LS00 quad 2-input NAND gate, allowing students to build a few simple circuits immediately. The second section contains a set of hands-on lab jobs with step-by-step instructions on using the Xilinx XC95108 CPLD. With its comprehensive appendices, this manual can prove useful to those who work with large-scale programmable devices such as CPLDs and FPGAs in the fields of electronics and engineering.




Computers in Chemical Education and Research


Book Description

The impact of computers on all rea1ms of Chemistry has been one of the most important factors in the deve10pment of this science during the last years. In recognition of this fact, in 1971, the "First International Conference on Computers in Chemi ca1 Research and Education", was held at DeKa1b, I11inois, USA. A second Conference took p1ace in Ljub1jana, Yugos1avia in 1973 and this third Conference in Caracas, Venezuela, in 1976. The aim of these conferences was to provide a high level forum for the 1eading researchers to exchange information at the frontiers of present day computer app1ications to the different fie1ds of Chemistry. The present "Third International Conference on Computers in Chemica1 Research, Education and Techno10gy", whose proceedings are pub1ished in the present vo1ume, was conceived, by means of aseries of invited 1ectures, as a survey of the present-date state of the art in some of the most relevant areas of computer app1ications in Chemistry.







Comprehensive Treatise of Electrochemistry


Book Description

It is now time for a comprehensive treatise to look at the whole field of electrochemistry. The present treatise was conceived in 1974, and the earliest invitations to authors for contributions were made in 1975. The completion of the early volumes has been delayed by various factors. There has been no attempt to make each article emphasize the most recent situation at the expense of an overall statement of the modern view. This treatise is not a collection of articles from Recent Advances in Electrochemistry or Modern Aspects of Electrochemistry. It is an attempt at making a mature statement about the present position in the vast area of what is best looked at as a new interdisciplinary field. Texas A & M University J. O'M. Bockris University of Ottawa B. E. Conway Case Western Reserve University Ernest Yeager Texas A & M University Ralph E. White Preface to Volume 8 Experimental methods in electrochemistry are becoming more diverse. This volume describes many of the new techniques that are being used as well as some of the well-established techniques. It begins with two chapters (1 and 2) on electronic instrumentation and methods for utilization of microcomputers for experimental data acquisition and reduction. Next, two chapters (3 and 4) on classical methods of electrochemical analysis are presented: ion selective electrodes and polarography.




Automatic Methods of Analysis


Book Description

This new monograph provides a comprehensive overview of the state of the art of the automation of laboratory processes in analytical chemistry. The topics have been chosen according to such criteria as the degree of consolidation, scope of application and most promising trends.The first part of the book begins with the basic principles behind the automation of laboratory processes, then describes automatic systems for sampling and sample treatment. In the second part the principal types of analysers are discussed: continuous, batch and robotic. The third part is devoted to the automation of analytical instrumentation: spectroscopic, electroanalytical and chromatographic techniques and titrators. The last part presents some examples of the application of automation to clinical chemistry, environmental pollution monitoring and industrial process control.The text is supplemented by 290 figures and 800 literature references. It is written primarily for scientists directly involved in laboratory work and those responsible for industrial planning and control, research centres, etc. It will also be of interest to analytical chemists wishing to update their knowledge in this area, and will be of especial interest to scientists directly related to environmental sciences or clinical chemistry.