Direct Numerical Simulation of Compressible and Incompressible Wall Bounded Turbulent Flows with Pressure Gradients


Book Description

This thesis is focused on direct numerical simulation (DNS) of compressible and incompressible fully developed and developing turbulent flows between isothermal walls using a discontinuous Galerkin method (DGM). Three cases (Ma = 0.2, 0.7 and 1.5) of DNS of turbulent channel flows between isothermal walls with Re ~ 2800, based on bulk velocity and half channel width, have been carried out. It is found that a power law seems to scale mean streamwise velocity with Ma slightly better than the more usual log-law. Inner and outer scaling of second-order and higher-order statistics have been analyzed. The linkage between the pressure gradient and vorticity flux on the wall has been theoretically derived and confirmed and they are highly correlated very close to the wall. The correlation coefficients are influenced by Ma, and viscosity when Ma is high. The near-wall spanwise streak spacing increases with Ma. Isosurfaces of the second invariant of the velocity gradient tensor are more sparsely distributed and elongated as Ma increases. DNS of turbulent isothermal-wall bounded flow subjected to favourable and adverse pressure gradient (FPG, APG) at Ma ~ 0.2 and Reref ~ 428000, based on the inlet bulk velocity and the streamwise length of the bottom wall, is also investigated. The FPG/APG is obtained by imposing a concave/convex curvature on the top wall of a plane channel. The flows on the bottom and top walls are tripped turbulent and laminar boundary layers, respectively. It is observed that the first and second order statistics are strongly influenced by the pressure gradients. The cross-correlation coefficients of the pressure gradients and vorticity flux remain constant across the FPG/APG regions of the flat wall. High correlations between the streamwise/wallnormal pressure gradient and the spanwise vorticity are found near the separation region close to the curved top wall. The angle of inclined hairpin structure to streamwise direction of the bottom wall is smaller (flatter) in the FPG region than the APG region.




Statistical Approach to Wall Turbulence


Book Description

Wall turbulence is encountered in many technological applications as well as in the atmosphere, and a detailed understanding leading to its management would have considerable beneficial consequences in many areas. A lot of inspired work by experimenters, theoreticians, engineers and mathematicians has been accomplished over recent decades on this important topic and Statistical Approach to Wall Turbulence provides an updated and integrated view on the progress made in this area. Wall turbulence is a complex phenomenon that has several industrial applications, such as in aerodynamics, turbomachinery, geophysical flows, internal engines, etc. Several books exist on fluid turbulence, but Statistical Approach to Wall Turbulence is original in the sense that it focuses solely on the turbulent flows bounded by solid boundaries. The book covers the different physical aspects of wall turbulence, beginning with classical phenomenological aspects before advancing to recent research in the effects of the Reynolds numbers, near wall coherent structures, and wall turbulent transport process. This book would be of interest to postgraduate and undergraduate students in mechanical, chemical, and aerospace engineering, as well as researchers in aerodynamics, combustion, and all applications of wall turbulence.




Progress in Wall Turbulence 2


Book Description

This is the proceedings of the ERCOFTAC Workshop on Progress in Wall Turbulence: Understanding and Modelling, that was held in Lille, France from June 18 to 20, 2014. The workshop brought together world specialists of near wall turbulence and stimulated exchanges between them around up-to-date theories, experiments, simulations and numerical models. This book contains a coherent collection of recent results on near wall turbulence including theory, new experiments, DNS and modeling with RANS, LES. The fact that both physical understanding and modeling by different approaches are addressed by the best specialists in a single workshop is original.