Author : Iacint Manoliu
Publisher : CRC Press
Page : 527 pages
File Size : 36,48 MB
Release : 2008-05-20
Category : Technology & Engineering
ISBN : 1482266431
Covering a broad range of topics (curricular matters in geo-engineering education, teaching; learning and assessment in geo-engineering education; challenges in geotechnical engineering education; issues in education and training in Engineering Geology; the link university -professional world in geo-engineering, this book will be invaluable to university teachers, academics and professionals involved in education and training in geo-engineering sciences.
Author : David E. Reisner
Publisher : CRC Press
Page : 332 pages
File Size : 10,13 MB
Release : 2014-09-24
Category : Science
ISBN : 0415621275
The world’s fresh water supplies are dwindling rapidly—even wastewater is now considered an asset. By 2025, most of the world's population will be facing serious water stresses and shortages. Aquananotechnology: Global Prospects breaks new ground with its informative and innovative introduction of the application of nanotechnology to the remediation of contaminated water for drinking and industrial use. It provides a comprehensive overview, from a global perspective, of the latest research and developments in the use of nanotechnology for water purification and desalination methods. The book also covers approaches to remediation such as high surface area nanoscale media for adsorption of toxic species, UV treatment of pathogens, and regeneration of saturated media with applications in municipal water supplies, produced water from fracking, ballast water, and more. It also discusses membranes, desalination, sensing, engineered polymers, magnetic nanomaterials, electrospun nanofibers, photocatalysis, endocrine disruptors, and Al13 clusters. It explores physics-based phenomena such as subcritical water and cavitation-induced sonoluminescence, and fog harvesting. With contributions from experts in developed and developing countries, including those with severe contamination, such as China, India, and Pakistan, the book’s content spans a wide range of the subject areas that fall under the aquananotechnology banner, either squarely or tangentially. The book strongly emphasizes sorption media, with broad application to a myriad of contaminants—both geogenic and anthropogenic—keeping in mind that it is not enough for water to be potable, it must also be palatable.
Author : Luis Gonzalez de Vallejo
Publisher : CRC Press
Page : 1349 pages
File Size : 19,79 MB
Release : 2011-07-06
Category : Science
ISBN : 143988465X
A thorough knowledge of geology is essential in the design and construction of infrastructures for transport, buildings and mining operations; while an understanding of geology is also crucial for those working in urban, territorial and environmental planning and in the prevention and mitigation of geohazards.Geological Engineering provides an inte
Author : A. Anagnostopoulos
Publisher : IOS Press
Page : 664 pages
File Size : 35,35 MB
Release : 2013-03-21
Category : Technology & Engineering
ISBN : 1614991995
This publication contains the papers presented at the 15th European Conference on Soil Mechanics and Geotechnical Engineering (ECSMGE), held in Athens, Greece. Considerable progress has been made in recent decades in understanding the engineering behavior of those hard soils and weak rocks that clearly fall into either the field of soil or of rock mechanics, and there have been important developments in design and construction methods to cope with them. Progress would be even more desirable, however, for those materials which fall into the ‘grey’ area between soils and rocks. They present particular challenges due to their diversity, the difficulties and problems arising in their identification and classification, their sampling and testing and in the establishment of suitable models to adequately describe their behavior. The publication aims to provide an updated overview of the existing worldwide knowledge of the geological features, engineering properties and behavior of such hard soils and weak rocks, with particular reference to the design and construction methods and problems associated with these materials. Part 4 was published post-conference and includes Conference Reports.
Author : Christophe Gaudin
Publisher : CRC Press
Page : 1366 pages
File Size : 14,4 MB
Release : 2019-01-08
Category : Technology & Engineering
ISBN : 1315776871
The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.
Author : Giorgio Lollino
Publisher : Springer
Page : 265 pages
File Size : 25,14 MB
Release : 2014-08-12
Category : Science
ISBN : 3319093037
This book is one out of 8 IAEG XII Congress volumes and deals with education and the professional ethics, which scientists, regulators and practitioners of engineering geology inevitably have to face through the purposes, methods, limitations and findings of their works. This volume presents contributions on the professional responsibilities of engineering geologists; the interaction of engineering geologists with other professionals; recognition of the engineering geological profession and its particular contribution to society, culture, and economy and implications for the education of engineering geologists at tertiary level and in further education schemes. Issues treated in this volume are: the position of engineering geology within the geo-engineering profession; professional ethics and communication; resource use and re-use; managing risk in a litigious world; engineering and geological responsibility and engineering geology at tertiary level. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: Environment, processes, issues and approaches. The congress topics and subject areas of the 8 IAEG XII Congress volumes are: Climate Change and Engineering Geology. Landslide Processes. River Basins, Reservoir Sedimentation and Water Resources. Marine and Coastal Processes. Urban Geology, Sustainable Planning and Landscape Exploitation. Applied Geology for Major Engineering Projects. Education, Professional Ethics and Public Recognition of Engineering Geology. Preservation of Cultural Heritage.
Author : Kaitano Dube
Publisher : Springer Nature
Page : 215 pages
File Size : 31,41 MB
Release :
Category :
ISBN : 3031699548
Author : Sarah Springman
Publisher : CRC Press
Page : 1522 pages
File Size : 48,57 MB
Release : 2010-06-17
Category : Technology & Engineering
ISBN : 1466557427
This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions.Topics presented at the conference:Soil - Structure - Interaction;
Author : I Antonescu
Publisher : CRC Press
Page : 537 pages
File Size : 16,58 MB
Release : 2020-09-10
Category : Education
ISBN : 1000100375
This volume contains papers and reports from the Conference held in Romania, June 2000. The book covers many topics, for example, place, role and content of geotechnical engineering in civil, environmental and earthquake engineering.
Author : The Organizing Committee of the 16th ICSMGE
Publisher : IOS Press
Page : 3742 pages
File Size : 32,24 MB
Release : 2005-09-12
Category : Technology & Engineering
ISBN : 1614996563
The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
