The Role of Reactant Unmixedness, Strain Rate, and Length Scale on Premixed Combustor Performance


Book Description

Lean premixed combustion provides a means to reduce pollutant formation and increase combustion efficiency. However, fuel-air mixing is rarely uniform in space and time. This nonuniformity in concentration will lead to relative increases in pollutant formation and decreases in combustion efficiency. The nonuniformity of the concentration at the exit of the premixer has been defined by Lyons (1981) as the ''unmixedness.'' Although turbulence properties such as length scales and strain rate are known to effect unmixedness, the exact relationship is unknown. Evaluating this relationship and the effect of unmixedness in premixed combustion on pollutant formation and combustion efficiency are an important part of the overall goal of US Department of Energy's Advanced Turbine System (ATS) program and are among the goals of the program described herein. The information obtained from ATS is intended to help to develop and commercialize gas turbines. The contributions to the program which the University of California (Irvine) Combustion Lab (UCICL) will provide are: (1) establish the relationship of inlet unmixedness, length scales, and mean strain rate to performance, (2) determine the optimal levels of inlet unmixedness, length scales, and mean strain rates to maximize combustor performance, and (3) identify efficient premixing methods for achieving the necessary inlet conditions. The program during this reporting period is focused on developing a means to measure and qualify different degrees of temporal and spatial unmixedness. Laser diagnostic methods for planer unmixedness measurements are being developed and preliminary results are presented herein. These results will be used to (1), aid in the design of experimental premixers, and (2), determine the unmixedness which will be correlated with the emissions of the combustor. This measure of unmixedness coupled with length scale, strain rate and intensity information is required to attain the UCI goals.




Effects of the Fuel-Air Mixing on Combustion Instabilities and NOx Emissions in Lean Premixed Combustion


Book Description

An experimental study was conducted to investigate the effects of the fuel-air mixing on combustion instabilities and NO x emissions in lean premixed combustion. High speed PIV measurements in water were conducted to capture the mean and dynamic behavior of the cold flow generated by a 3X model of the tested premixer. High speed PLIF in water measurements were conducted to quantify the mean and unsteady fuel-air mixing at different momentum flux ratios. Atmospheric combustion tests using the original premixer, were conducted using natural gas and propane at the same momentum flux ratios of the PLIF mixing tests. An emissions analyzer was used to measure the emissions from combustion tests. Dynamic pressure transducers were used to measure the amplitude and the frequency of the dynamic pressure oscillations associated with the combustion instabilities. CHEMKIN-PRO was used to model the atmospheric combustion and predict NO x emissions at different conditions. Results showed that unsteady fuel-air mixing was concentrated at the center and near the outer edges of the premixer. These regions were characterized by high fuel concentration gradients. With the increase in the momentum flux ratio, the concentration gradient and the level of unsteady mixing increased, indicating that the fuel-air spatial unmixedness was the source of the unsteady mixing. It was found that local flow turbulence tended to decrease the concentration gradient through enhancing the fuel-air mixing, which resulted in decreasing the level of unsteady mixing. NO x emissions from atmospheric combustion increased with the increase in the momentum flux ratio due to the increase in the flame temperature and the fuel-air spatial and temporal unmixedness. The intensity of the combustion dynamics increased with the increase in the level of unsteady mixing. Axial injection of the fuel into the regions of strong unsteady mixing eliminated the combustion dynamics through damping the unsteady mixing. Results of CHEMKIN-PRO agreed very well with the experimental results and showed that the spatial and temporal unmixedness have a significant effect on NO x emissions for very lean combustion (F = 0.4). With the increase in the equivalence ratio, their relative contribution decreased.




Paper


Book Description







ASME Technical Papers


Book Description




Novel Combustion Concepts for Sustainable Energy Development


Book Description

This book comprises research studies of novel work on combustion for sustainable energy development. It offers an insight into a few viable novel technologies for improved, efficient and sustainable utilization of combustion-based energy production using both fossil and bio fuels. Special emphasis is placed on micro-scale combustion systems that offer new challenges and opportunities. The book is divided into five sections, with chapters from 3-4 leading experts forming the core of each section. The book should prove useful to a variety of readers, including students, researchers, and professionals.