EPA's Rule on Paints and Coatings


Book Description







Guide to Cleaner Technologies


Book Description

Describes cleaner technologies that can be used to reduce emissions and wastes from paints and coatings applications. Identifies potentially viable clean technologies that can reduce emissions and waste generation through the use of modified paint and coating formulations or application and curing techniques. Provides resources for obtaining more detailed engineering and economic information about these technologies. Addresses available technologies, emerging technologies and pollution prevention strategies. List of information sources. Drawings, charts and figures.




EPA-450/2


Book Description




National Volatile Organic Compound Emission Standards for Aerosol Coatings, Us Environmental Protection Agency Regulation, 2018


Book Description

National Volatile Organic Compound Emission Standards for Aerosol Coatings (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the National Volatile Organic Compound Emission Standards for Aerosol Coatings (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 This action promulgates national emission standards for the aerosol coatings (aerosol spray paints) category under section 183(e) of the Clean Air Act (CAA). The standards implement section 183(e) of the CAA, as amended in 1990, which requires the Administrator to control volatile organic compounds (VOC) emissions from certain categories of consumer and commercial products for purposes of reducing VOC emissions contributing to ozone formation and ozone nonattainment. This regulation establishes nationwide reactivity-based standards for aerosol coatings. States have previously promulgated rules for the aerosol coatings category based upon reductions of VOC by mass; however, EPA has concluded that a national rule based upon the relative reactivity approach will achieve more reduction in ozone formation than may be achieved by a mass-based approach for this specific product category. This rule will better control a product's contribution to ozone formation by encouraging the use of less reactive VOC ingredients, rather than treating all VOC in a product alike through the traditional mass-based approach. We are also revising EPA's regulatory definition of VOC. This revision is necessary to include certain compounds that would otherwise be exempt in order to account for the reactive compounds in aerosol coatings that contribute to ozone formation. Therefore, certain compounds that would not be VOC under the otherwise applicable definition will count towards the applicable reactivity limits under this final regulation. The initial listing of product categories and schedule for regulation was published on March 23, 1995 (60 FR 15264). This final action announces EPA's final decision to list aerosol coatings for regulation under Group III of the consumer and commercial product category for which regulations are mandated under section 183(e) of the CAA. This book contains: - The complete text of the National Volatile Organic Compound Emission Standards for Aerosol Coatings (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section




National Emission Standards for Hazardous Air Pollutants - Paint Stripping and Miscellaneous Surface Coating Operations at Area Sources, Us Environmental Protection Agency Regulation, 2018


Book Description

National Emission Standards for Hazardous Air Pollutants - Paint Stripping and Miscellaneous Surface Coating Operations at Area Sources (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the National Emission Standards for Hazardous Air Pollutants - Paint Stripping and Miscellaneous Surface Coating Operations at Area Sources (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 This action promulgates national emission standards for hazardous air pollutants (NESHAP) for area sources engaged in paint stripping, surface coating of motor vehicles and mobile equipment, and miscellaneous surface coating operations. EPA has listed "Paint Stripping," "Plastic Parts and Products (Surface Coating)," and "Autobody Refinishing Paint Shops" as area sources of hazardous air pollutants (HAP) that contribute to the risk to public health in urban areas under the Integrated Urban Air Toxics Strategy. This final rule includes emissions standards that reflect the generally available control technology or management practices in each of these area source categories. "Plastic Parts and Products (Surface Coating)" has been renamed "Miscellaneous Surface Coating," and "Autobody Refinishing Paint Shops" has been renamed "Motor Vehicle and Mobile Equipment Surface Coating" to more accurately reflect the scope of these source categories. This book contains: - The complete text of the National Emission Standards for Hazardous Air Pollutants - Paint Stripping and Miscellaneous Surface Coating Operations at Area Sources (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section




Guidance for Controlling Asbestos-Containing Materials in Buildings


Book Description

Provides guidance on controlling asbestos-containing materials (ACM) found in buildings. Provides a current summary of data on exposure to airborne asbestos; gives survey procedures for determining if ACM is present in buildings; explains how to establish a special operations and maintenance program in a building found to contain asbestos; reviews technical issues confronted when assessing the potential for exposure to airborne asbestos, in particular indoor settings; suggests a structured process for selecting a particular course of action, and much more. Commonly referred to as the Blue Book.




Consumer and Commercial Products, Group IV - Control Techniques Guidelines in Lieu of Regulations for Miscellaneous Metal Products Coatings (Us Environmental Protection Agency Regulation) (Epa) (2018 Edition)


Book Description

Consumer and Commercial Products, Group IV - Control Techniques Guidelines in Lieu of Regulations for Miscellaneous Metal Products Coatings (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the Consumer and Commercial Products, Group IV - Control Techniques Guidelines in Lieu of Regulations for Miscellaneous Metal Products Coatings (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 Pursuant to Section 183(e)(3)(C) of the Clean Air Act, EPA has determined that control techniques guidelines will be substantially as effective as national regulations in reducing emissions of volatile organic compounds in ozone national ambient air quality standard nonattainment areas from the following five Group IV product categories: miscellaneous metal products coatings, plastic parts coatings, auto and light-duty truck assembly coatings, fiberglass boat manufacturing materials, and miscellaneous industrial adhesives. Based on this determination, EPA is issuing control techniques guidelines in lieu of national regulations for these product categories. These control techniques guidelines will provide guidance to the States concerning EPA's recommendations for reasonably available control technology-level controls for these product categories. EPA further takes final action to list the five Group IV consumer and commercial product categories addressed in this notice pursuant to CAA Section 183(e). This book contains: - The complete text of the Consumer and Commercial Products, Group IV - Control Techniques Guidelines in Lieu of Regulations for Miscellaneous Metal Products Coatings (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section




Lead-based Paint


Book Description