Masters Theses in the Pure and Applied Sciences


Book Description

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 32 (thesis year 1987) a total of 12,483 theses titles from 22 Canadian and 176 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 32 reports theses submitted in 1987, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.







Soil Properties Evaluation from Centrifugal Models and Field Performance


Book Description

Proceedings of a session at the ASCE National Convention, held in Nashville, Tennessee, May 10, 1988. Sponsored by the Geotechnical Engineering Division of ASCE. This Geotechnical Special Publication contains eight papers on the evaluation of soil property values. The performance of geotechnical projects is dependent upon the appropriateness of the design theory to the boundary conditions and the characterization of the soil properties used in the theory. These papers assess the reliance of soil property values as verified by field or centrifugal model observations. The papers on centrifugal modeling examine slope stability assessment due to phreatic surface elevations and surcharge loadings on the slope crest. Centrifugal modeling was also used to evaluate settlements and capacities of shallow footings and large deformation consolidation of waste clays. Field performance papers discuss pile load test verification of designs based upon in situ tests. In addition, in situ tests were used to characterize seismic resistance, while visual observations evaluated braced cut performance.










Research Report


Book Description













The Deep Mixing Method


Book Description

The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d