Second RILEM International Conference on Concrete and Digital Fabrication


Book Description

This book gathers peer-reviewed contributions presented at the 2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete), held online and hosted by the Eindhoven University of Technology, the Netherlands from 6-9 July 2020. Focusing on additive and automated manufacturing technologies for the fabrication of cementitious construction materials, such as 3D concrete printing, powder bed printing, and shotcrete 3D printing, the papers highlight the latest findings in this fast-growing field, addressing topics like mixture design, admixtures, rheology and fresh-state behavior, alternative materials, microstructure, cold joints & interfaces, mechanical performance, reinforcement, structural engineering, durability and sustainability, automation and industrialization.




Advanced Techniques for Testing of Cement-Based Materials


Book Description

The book examines advanced, non-standardized techniques that have been developed for determining different properties of cement paste, mortar and concrete, and provides state-of-the-art information on methods for monitoring hydration-induced changes in cement-based materials (CBMs). These methods are often nondestructive and allow quasi-continuous monitoring covering the time span from placement of the material to formation of a fully hardened cement composite. The book also presents various applications of acoustic emission for characterizing fresh concrete, recent developments in ultrasonic methods for characterizing CBMs since placement, application of ambient response methods for measuring elastic modulus, methods for determining deformational characteristics of CBMs since setting and methods for in situ measurements of stresses in concrete elements during hardening.




Multi-Scale Modeling and Characterization of Infrastructure Materials


Book Description

The micro- and nano-modification of infrastructure materials and the associated multi-scale characterization and simulation has the potential to open up whole new uses and classes of materials, with wide-ranging implications for society. The use of multi-scale characterization and simulation brings the ability to target changes at the very small scale that predictably effect the bulk behavior of the material and thus allowing for the optimization of material behavior and performance. The International RILEM Symposium on Multi-Scale Modeling and Characterization of Infrastructure Materials (Stockholm, June 10-12, 2013) brought together key researchers from around the world to present their findings and ongoing research in this field in a focused environment with extended discussion times. From asphalt to concrete, from chemistry to mechanics, from nano- to macro-scale: the collection of topics covered by the Symposium represents the width and depth of the currently ongoing efforts of developing more sustainable infrastructure materials. Researchers, practitioners, undergraduates and graduate students engaged in infrastructure materials or multi-scale characterization and modeling efforts can use this book as a comprehensive reference, to learn about the currently ongoing research efforts in this field or as an inspiration for new research ideas to enhance the long-term performance of infrastructure materials from a fundamental perspective. The Symposium was held under the auspices of the RILEM Technical Committee on Nanotechnology-Based Bituminous Materials 231-NBM and the Transport Research Board (TRB) Technical Committee on Characteristics of Asphalt Materials AFK20.




8th PhD Symposium in Copenhagen Denmark


Book Description




Mechanical Properties of Cementitious Materials at Microscale


Book Description

This book provides information on characterizing the microstructure and mechanical properties of cementitious materials at microscale. Specifically, with the intention to provide the methods of preparing the samples for the micro-scale mechanical testing, to address the techniques for measuring and analyzing the elastic modulus, the stiffness, and the fracture toughness of cementitious materials at micro scale by instrumented indentation, to describe a method for measuring and interpreting creep behavior of cementitious materials at micro scale, and to demonstrate the homogenization method for obtaining the mechanical properties of cementitious materials across scales. The information in this book is helpful to a wide readership in the field of civil engineering and materials science working with cementitious materials and other composite materials.




Atomistic Simulation of Anistropic Crystal Structures at Nanoscale


Book Description

Multiscale simulations of atomistic/continuum coupling in computational materials science, where the scale expands from macro-/micro- to nanoscale, has become a hot research topic. These small units, usually nanostructures, are commonly anisotropic. The development of molecular modeling tools to describe and predict the mechanical properties of structures reveals an undeniable practical importance. Typical anisotropic structures (e.g. cubic, hexagonal, monoclinic) using DFT, MD, and atomic finite element methods are especially interesting, according to the modeling requirement of upscaling structures. It therefore connects nanoscale modeling and continuous patterns of deformation behavior by identifying relevant parameters from smaller to larger scales. These methodologies have the prospect of significant applications. I would like to recommend this book to both beginners and experienced researchers.




Experimental Unsaturated Soil Mechanics


Book Description

These proceedings are a continuation of the series of International Conferences in Germany entitled "Mechanics of Unsaturated Soils." The objective is to discuss and understand unsaturated soil behaviour, so that engineered activities are improved in terms of judgement and quality. In addition to knowledge of classical concepts, it is a challenge to adapt convincing new concepts and present them in such a way that they can be used in engineering practices.




Integral Waterproofing of Concrete Structures


Book Description

Integral Waterproofing of Concrete Structures demonstrates how integral waterproofing technologies can solve concrete durability problems based on performance and characterization experimental results. This book first establishes a background about concrete structures and porosity linked with concrete hydration, then goes on to consider concrete durability problems from the perspective of water penetration including damages from freeze-thaw cycles, alkali silica reactions, and chloride ion penetration. The mechanisms, applications, performances, and limitations of waterproofing technologies including coatings and integral systems are compared. The book also showcases all application methods of crystallization waterproofing materials, including material spray on cured concrete and on fresh concrete, and their addition to concrete mix designs as enhancers or admixtures. Pore-blocking and lining waterproofing systems including silicate-based and hygroscopic kinds, and other waterproofing materials are also discussed. - Includes various, advanced, recent technologies in the field of waterproofing - Presents and describes enhanced concrete characteristics and modified structures within the context of material engineering - Summarizes the characteristics of waterproofing systems obtained from experimental results