Handbook of Compressed Gases


Book Description

In the field of compressed gases and related equipment, there is an expanding core of essential knowledge that people handling and using these materials should be familiar with or should know where to find when necessary. The focus of this book concerns the properties and the accepted means of trans portation, storage, and handling of compressed gases. This Handbook is simul taneously intended as an overview of the subject and a source of supplementary information. It is also intended to serve as a guide to pertinent federal regulatory requirements and published standards of the Compressed Gas Association and other standards-writing bodies. Readers are advised that the CGA technical pamphlets remain the official state ment of policy by the Association on a particular matter. Reference is made throughout this text to the numerous technical pamphlets published by the Com pressed Gas Association. Some of these publications have been incorporated by reference into federal, state, provincial, and local regulations. Since these pam phlets are reviewed on a periodic basis, wherever the text of this Handbook may be found in conflict with corresponding information in the CGA technical pam phlets, the latter shall take precedence.




Emergency Response Guidebook


Book Description

Does the identification number 60 indicate a toxic substance or a flammable solid, in the molten state at an elevated temperature? Does the identification number 1035 indicate ethane or butane? What is the difference between natural gas transmission pipelines and natural gas distribution pipelines? If you came upon an overturned truck on the highway that was leaking, would you be able to identify if it was hazardous and know what steps to take? Questions like these and more are answered in the Emergency Response Guidebook. Learn how to identify symbols for and vehicles carrying toxic, flammable, explosive, radioactive, or otherwise harmful substances and how to respond once an incident involving those substances has been identified. Always be prepared in situations that are unfamiliar and dangerous and know how to rectify them. Keeping this guide around at all times will ensure that, if you were to come upon a transportation situation involving hazardous substances or dangerous goods, you will be able to help keep others and yourself out of danger. With color-coded pages for quick and easy reference, this is the official manual used by first responders in the United States and Canada for transportation incidents involving dangerous goods or hazardous materials.




Medical Gas Cylinders


Book Description




Physics for the Anaesthetic Viva


Book Description

A concise book that conveys the essential physics concepts required to pass the FRCA viva examinations, with relevant applied questions.




NFPA 58


Book Description




Handbook of Compressed Gases


Book Description







Low GWP (A2L) Refrigerant Safety


Book Description

As the HVACR industry continues to move forward and innovate, the refrigerants that were once so commonplace are now being phased out. Replacing them are more energy efficient, environmentally friendlier refrigerants, known as Low GWP refrigerants. Many of these new refrigerants are classified by ASHRAE as A2L, or slightly flammable. The industry is also seeing expanded use of some hydrocarbon (A3) refrigerants, such as propane and isobutane. Students and technicians will require additional training for the safe handling and transportation of these refrigerants. The Low GWP refrigerant program manual covers: Refrigerant safety Introduction to Low GWP refrigerants Refrigerant properties and characteristics The refrigeration cycle Working with refrigerant blends Proper installation and service guidelines Flammable refrigerant considerations Explanation of the associated codes and standards for A2L refrigerants




The Safe Use of Compressed Gases in Welding, Flame Cutting and Allied Processes


Book Description

Provides guidance to promote the safer use of compressed gases in gas welding, flame cutting and related processes. Contents: Fire, explosion and other hazards; Design construction and provision of equipment; Storage and handling of gas cylinders; Personal protective equipment; Operating procedures; Fire precautions; Maintenance, examination and testing of equipment; Legal requirements and enforcement arrangements.