Gm-C Filter Synthesis for Modern RF Systems


Book Description

This book discusses synthesis of Gm-C filter for modern radio frequency systems. Analogue filters are an inevitable part of the chain of signal processing in modern radio and telecommunication systems. Among the technologies implemented for these purposes are the so-called Gm-C filters which are built of operational transconductance amplifiers and capacitors. This technology allows for integration of the filter into a CMOS system-on-chip so making it very attractive for application in low-power (battery operated) devices. The objective of this book is to achieve three goals: (1) to fully describe the circuit synthesis procedures for parallel, cascade, and a realization based on LC prototypes; (2) to make a thorough evaluation of the advantages and disadvantages of these methods and to recommend the “preferable” one; and (3) to create an extensive table of element values of cascaded Gm-C filters realizing the best-known low-pass filter functions. The book will influence the design community to embrace this technology even for non-communication applications.




Gm-C Filter Synthesis for Modern RF Systems


Book Description

This book discusses synthesis of Gm-C filter for modern radio frequency systems. Analogue filters are an inevitable part of the chain of signal processing in modern radio and telecommunication systems. Among the technologies implemented for these purposes are the so-called Gm-C filters which are built of operational transconductance amplifiers and capacitors. This technology allows for integration of the filter into a CMOS system-on-chip so making it very attractive for application in low-power (battery operated) devices. The objective of this book is to achieve three goals: (1) to fully describe the circuit synthesis procedures for parallel, cascade, and a realization based on LC prototypes; (2) to make a thorough evaluation of the advantages and disadvantages of these methods and to recommend the "preferable" one; and (3) to create an extensive table of element values of cascaded Gm-C filters realizing the best-known low-pass filter functions. The book will influence the design community to embrace this technology even for non-communication applications.







Analog Circuit Design


Book Description

This new book on Analog Circuit Design contains the revised contributions of all the tutorial speakers of the eight workshop AACD (Advances in Analog Circuit Design), which was held at Nice, France on March 23-25, 1999. The workshop was organized by Yves Leduc of TI Nice, France. The program committee consisted of Willy Sansen, K.U.Leuven, Belgium, Han Huijsing, T.U.Delft, The Netherlands and Rudy van de Plassche, T.U.Eindhoven, The Netherlands. The aim of these AACD workshops is to bring together a restricted group of about 100 people who are personally advancing the frontiers of analog circuit design to brainstorm on new possibilities and future developments in a restricted number of fields. They are concentrated around three topics. In each topic six speakers give a tutorial presentation. Eighteen papers are thus included in this book. The topics of 1999 are: (X)DSL and other communication systems RF MOST models Integrated filters and oscillators The other topics, which have been coverd before, are: 1992 Operational amplifiers A-D Converters Analog CAD 1993 Mixed-mode A+D design Sensor interfaces Communication circuits 1994 Low-power low-voltage design Integrated filters Smart power 1995 Low-noise low-power low-voltge design Mixed-mode design with CAD tools Voltage, current and time references vii viii 1996 RF CMOS circuit design Bandpass sigma-delta and other data converters Translinear circuits 1997 RF A-D Converters Sensor and actuator interfaces Low-noise oscillators, PLL's and synthesizers 1998 I-Volt electronics Design and implementation of mixed-mode systems Low-noise amplifiers and RF power amplifiers for telecommunications




Radio Frequency Integrated Circuits and Systems


Book Description

This updated and expanded new edition equips students with a thorough understanding of the state-of-the-art in radio frequency (RF) design and the practical knowledge and skills needed in industry. Introductory and advanced topics are covered in-depth, with clear step-by-step explanations, including core topics such as RF components, signals and systems, two-ports, noise, distortion, low-noise amplifiers, power amplifiers, and transceiver architectures. New material has been added on wave propagation, skin effect, antennas, mixers and oscillators, and digital PAs and transmitters. Two new chapters detail the analysis and design of RF and IF filters (including SAW and FBAR duplexers and N-path filters), phase-locked loops, frequency synthesizers, digital PLLs, and frequency dividers. Theory is linked to practice through real-world applications, practical design examples, and exploration of the pros and cons of various topologies. Over 250 homework problems are included, with solutions and lecture slides for instructors available online. With its uniquely practical and intuitive approach, this is an essential text for graduate courses on RFICs and a useful reference for practicing engineers.




Filter Design Solutions for RF systems


Book Description

This Special Issue focuses on the state-of-the-art results from the definition and design of filters for low- and high-frequency applications and systems. Different technologies and solutions are commonly adopted for filter definition, from electrical to electromechanical and mechanical solutions, from passive to active devices, and from hybrid to integrated designs. Aspects related to both theoretical and experimental research in filter design, CAD modeling and novel technologies and applications, as well as filter fabrication, characterization and testing, are covered. The proposed research articles deal with different topics as follows: Modeling, design and simulation of filters; Processes and fabrication technologies for filters; Automated characterization and test of filters; Voltage and current mode filters; Integrated and discrete filters; Passive and active filters; Variable filters, characterization and tunability.




Innovations in Electrical and Electronic Engineering


Book Description

This book features selected high-quality papers presented at International Conference on Electrical and Electronics Engineering (ICEEE 2022), jointly organized by University of Malaya and Bharath Institute of Higher Education and Research India during January 8–9, 2022, at NCR New Delhi, India. The book focuses on current development in the fields of electrical and electronics engineering. The book one covers electrical engineering topics–power and energy including renewable energy, power electronics and applications, control, and automation and instrumentation and book two covers the areas of robotics, artificial intelligence and IoT, electronics devices, circuits and systems, wireless and optical communication, RF and microwaves, VLSI, and signal processing. The book is beneficial for readers from both academia and industry.




Design of High Frequency Integrated Analogue Filters


Book Description

Sun (communication electronics, U. of Hertfordshire, UK), this volume's editor, also contributed a chapter on the architectures and design of OTA/gm-C filters. The other papers describe on-chip automatic tuning of filters, analog adaptive filters, low voltage techniques for switched-current filters, log domain filters, the MOSFET-C technique and active filters using integrated inductors. The contributors teach electrical engineering in the US, the UK, Thailand, and Canada. Annotation copyrighted by Book News, Inc., Portland, OR




MicroCMOS Design


Book Description

MicroCMOS Design covers key analog design methodologies with an emphasis on analog systems that can be integrated into systems-on-chip (SoCs). Starting at the transistor level, this book introduces basic concepts in the design of system-level complementary metal-oxide semiconductors (CMOS). It uses practical examples to illustrate circuit construction so that readers can develop an intuitive understanding rather than just assimilate the usual conventional analytical knowledge. As SoCs become increasingly complex, analog/radio frequency (RF) system designers have to master both system- and transistor-level design aspects. They must understand abstract concepts associated with large components, such as analog-to-digital converters (ADCs) and phase-locked loops (PLLs). To help readers along, this book discusses topics including: Amplifier basics & design Operational amplifier (Opamp) Data converter basics Nyquist-rate data converters Oversampling data converters High-resolution data converters PLL basics Frequency synthesis and clock recovery Focused more on design than analysis, this reference avoids lengthy equations and instead helps readers acquire a more hands-on mastery of the subject based on the application of core design concepts. Offering the needed perspective on the various design techniques for data converter and PLL design, coverage starts with abstract concepts—including discussion of bipolar junction transistors (BJTs) and MOS transistors—and builds up to an examination of the larger systems derived from microCMOS design.




Emerging Technologies in Computing


Book Description

This book constitutes the refereed conference proceedings of the 4th International Conference on Emerging Technologies in Computing, iCEtiC 2021, held in August 2021. Due to VOVID-19 pandemic the conference was helt virtually. The 15 revised full papers were reviewed and selected from 44 submissions and are organized in topical sections covering Information and Network Security; Cloud, IoT and Distributed Computing; AI, Expert Systems and Big Data Analytics