Geothermal Heat Pumps: Installation Guide
Author : Stephen K. Ewings
Publisher : Stephen K Ewings
Page : 246 pages
File Size : 48,44 MB
Release : 2008-10
Category : House & Home
ISBN : 0646503782
Design of Heat Exchangers for Heat Pump Applications
Author : Marco Fossa
Publisher : MDPI
Page : 172 pages
File Size : 15,28 MB
Release : 2020-12-28
Category : Technology & Engineering
ISBN : 3039435132
Book Description
Heat pumps (HPs) allow for providing heat without direct combustion, in both civil and industrial applications. They are very efficient systems that, by exploiting electrical energy, greatly reduce local environmental pollution and CO2 global emissions. The fact that electricity is a partially renewable resource and because the coefficient of performance (COP) can be as high as four or more, means that HPs can be nearly carbon neutral for a full sustainable future. The proper selection of the heat source and the correct design of the heat exchangers is crucial for attaining high HP efficiencies. Heat exchangers (also in terms of HP control strategies) are hence one of the main elements of HPs, and improving their performance enhances the effectiveness of the whole system. Both the heat transfer and pressure drop have to be taken into account for the correct sizing, especially in the case of mini- and micro-geometries, for which traditional models and correlations can not be applied. New models and measurements are required for best HPs system design, including optimization strategies for energy exploitation, temperature control, and mechanical reliability. Thus, a multidisciplinary approach of the analysis is requested and become the future challenge.
Fundamentals of Geothermal Heat Pump Systems
Author : Louis Lamarche
Publisher : Springer Nature
Page : 301 pages
File Size : 26,38 MB
Release : 2023-10-05
Category : Technology & Engineering
ISBN : 3031321766
Book Description
Fundamentals of Geothermal Heat Pump Systems: Design and Application is written for upper-level undergraduate and graduate courses in renewable energy and heat transfer. This classroom-tested text covers ground heat exchanger modeling, secondary loop ground-source system design, pumping energy, thermal response testing, commercial building applications, and horizontal and groundwater ground heat exchangers. The book is oriented to practical applications, including the economic analysis of ground source heat pump (GSHP) systems, but more theoretical sections are provided covering research-related geothermal applications. Chapters on heat transfer fundamentals and heat pump concepts are included for readers less familiar with thermal engineering concepts. A chapter covering the economic analysis of GSHP systems is also included. All of the examples and problems in the book are solved using the open-source Python programming language. The book will provide students in geothermal energy courses with a solid understanding of the subject. It will also be a valuable reference for professionals working in the field of renewable energy.
Geothermal Heat Pump and Heat Engine Systems
Author : Andrew D. Chiasson
Publisher : John Wiley & Sons
Page : 491 pages
File Size : 39,69 MB
Release : 2016-09-19
Category : Technology & Engineering
ISBN : 1118961943
Book Description
A unique approach to the study of geothermal energy systems This book takes a unique, holistic approach to the interdisciplinary study of geothermal energy systems, combining low, medium, and high temperature applications into a logical order. The emphasis is on the concept that all geothermal projects contain common elements of a "thermal energy reservoir" that must be properly designed and managed. The book is organized into four sections that examine geothermal systems: energy utilization from resource and site characterization; energy harnessing; energy conversion (heat pumps, direct uses, and heat engines); and energy distribution and uses. Examples are provided to highlight fundamental concepts, in addition to more complex system design and simulation. Key features: Companion website containing software tools for application of fundamental principles and solutions to real-world problems. Balance of theory, fundamental principles, and practical application. Interdisciplinary treatment of the subject matter. Geothermal Heat Pump & Heat Engine Systems: Theory and Practice is a unique textbook for Energy Engineering and Mechanical Engineering students as well as practicing engineers who are involved with low-enthalpy geothermal energy systems.
Emerging Technologies and Solutions for the Sustainable Climate Change Challenges
Author : Ji Whan Ahn
Publisher : MDPI
Page : 306 pages
File Size : 46,3 MB
Release : 2021-04-22
Category : Science
ISBN : 3039289950
Book Description
The Special Issue/book introduces advanced techniques and research that have helped to reduce CO2 emissions and to use CO2 for the manufacturing of valuable products. This book refers the research trends and emerging technologies contributing to the mitigation of current climate change. It covers multidisciplinary research topics such as carbon mineralization, solid waste management, and convergence technologies for sustainable solutions for climate change.
Analysis and Design of Energy Geostructures
Author : Lyesse Laloui
Publisher : Academic Press
Page : 1098 pages
File Size : 48,83 MB
Release : 2019-10-19
Category : Technology & Engineering
ISBN : 0128165987
Book Description
Analysis and Design of Energy Geostructures gathers in a unified framework the theoretical and experimental competence available on energy geostructures: innovative multifunctional earth-contact structures that can provide renewable energy supply and structural support to any built environment. The book covers the broad, interdisciplinary and integrated knowledge required to address the analysis and design of energy geostructures from energy, geotechnical and structural perspectives. This knowledge includes (Part A) an introduction to the technology; (Part B) the fundamentals of heat and mass transfers as well as of the mechanics of geomaterials and structures required to address the unprecedented behavior of energy geostructures; (Part C) the experimental evidence characterizing the considered geostructures; (Part D) various analytical and numerical modeling approaches to analyze the response of energy geostructures; and (Part E) the performance-based design and detailing essentials of energy geostructures. - Proposes the theoretical and practical application essentials required to address the analysis and design of energy geostructures from energy, geotechnical and structural perspectives - Presents a substantial amount of resolved exercises on key aspects governing the behavior and performance of energy geostructures to be considered in analysis and design - Summarizes and discusses the most recent scientific and technical knowledge about energy geostructures, including energy piles, energy tunnels and energy walls
Geothermal Heat Pump Systems
Author : David Borge-Diez
Publisher : Springer Nature
Page : 326 pages
File Size : 48,8 MB
Release : 2023-03-21
Category : Technology & Engineering
ISBN : 3031245245
Book Description
This book presents an overview of geothermal heating systems using ground source heat pumps in different countries. It evaluates the emissions and energy costs generated by the operation of low enthalpy geothermal systems, with heat pumps fed by different energy sources, and assesses, from an international point of view, those policies whose aim is a sustainable, low-carbon economy. The use of low-impact energy sources is gradually growing with the aim of reducing greenhouse gases emission and air pollution. The alternatives offered by geothermal systems are one of the key solutions for a future renewable development, enabling the electrification of heating systems and the use of biofuels. The book will be of interest to energy professionals and researchers.
From Fundamentals to Applications in Geotechnics
Author : D. Manzanal
Publisher : IOS Press
Page : 3344 pages
File Size : 42,1 MB
Release : 2015-12-11
Category : Technology & Engineering
ISBN : 1614996032
Book Description
The work of geotechnical engineers contributes to the creation of safe, economic and pleasant spaces to live, work and relax all over the world. Advances are constantly being made, and the expertise of the profession becomes ever more important with the increased pressure on space and resources. This book presents the proceedings of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), held in Buenos Aires, Argentina, in November 2015. This conference, held every four years, is an important opportunity for international experts, researchers, academics, professionals and geo-engineering companies to meet and exchange ideas and research findings in the areas of soil mechanics, rock mechanics, and their applications in civil, mining and environmental engineering. The articles are divided into nine sections: transportation geotechnics; in-situ testing; geo-engineering for energy and sustainability; numerical modeling in geotechnics; foundations and ground improvement; unsaturated soil behavior; embankments, dams and tailings; excavations and tunnels; and geo-risks, and cover a wide spectrum of issues from fundamentals to applications in geotechnics. This book will undoubtedly represent an essential reference for academics, researchers and practitioners in the field of soil mechanics and geotechnical engineering. In this proceedings, approximately 65% of the contributions are in English, and 35% of the contributions are in Spanish or Portuguese.
Heating and Cooling with Ground-Source Heat Pumps in Moderate and Cold Climates, Two-Volume Set
Author : Vasile Minea
Publisher : CRC Press
Page : 841 pages
File Size : 31,38 MB
Release : 2022-07-30
Category : Technology & Engineering
ISBN : 1000564584
Book Description
Heating and Cooling with Ground-Source Heat Pumps in Moderate and Cold Climates, Two-Volume Set focuses on the use of very low-temperature geothermal energy for heating and cooling residential, institutional, and industrial buildings, and aims to increase the design community’s awareness and knowledge of the benefits, design, and installation requirements of commercial/institutional building ground-source heat pumps (GSHP). This set helps readers assess applicability, select a GSHP system type, and estimate building thermal load to ensure proper size for ground-source subsystems, appropriate brine and groundwater flow rates, and apt design of building closed-loops with distributed or central geothermal heat pumps. The first volume addresses fundamentals and design principles of vertical and horizontal indirect and direct expansion closed-loop, as well as ground- and surface-water ground-source heat pump systems. It explains the thermodynamic aspects of mechanical and thermochemical compression cycles of geothermal heat pumps, as well as the energetic, economic, and environmental aspects associated with the use of ground-source heat pump systems for heating and cooling residential and commercial/institutional buildings in moderate and cold climates. The second volume focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects, as well as the most common and uncommon application fields of basic system configurations. The principles of system integrations and applications in moderate and cold climates are also presented, each followed by case studies. This comprehensive work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates
Author : Vasile Minea
Publisher : CRC Press
Page : 443 pages
File Size : 50,63 MB
Release : 2022-04-19
Category : Science
ISBN : 1000564258
Book Description
Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates: Design Principles, Potential Applications and Case Studies focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects (such as materials, thermal fluid carriers and pumping, and drilling/trenching technologies), as well as the most common and uncommon application fields for basic system configurations. The principles of system integrations and applications in moderate and cold climates (such as hybrid, solar-assisted, thermo-syphon, foundation, mines, snow melting, district heating and cooling ground-source heat pump systems, etc.) are also presented, each followed by case studies. Based on the author's more than 30 years of technical experience Discusses ground-source heat pump technologies that can be successfully applied in moderate and cold climates Presents several case studies, including successful energy results, as well as the main lessons learned This work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
