Heat Transmission in Boilers, Condensers and Evaporators - Primary Source Edition


Book Description

This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book.







Heat Transmission in Boilers, Condensers, and Evaporators (Classic Reprint)


Book Description

Excerpt from Heat Transmission in Boilers, Condensers, and Evaporators It would hardly be necessary to enlarge upon the expensive nature Of boiler experiments. With regard to the measurement of gas temperatures, it might be said that, even in the case Of large boilers, it is the common practice to measure the ue gas temperature by a single thermometer, having the bulb well inserted into the current of gas. Except when the boiler works lightly, such a position is probably sufficient to get an average temperature reading, seeing that the ow of gases is usually more or less turbulent. Quite apart from thermometer errors, however, there is one source of error which is nearly always neglected, and that is, the in uence of radiation from or to the thermometer bulb or cover. Usually the thermometer, whatever its type, is placed where it is more or less subject to the radiations from the comparatively cold boiler tubes or drums, which causes it to read below the true temperature of the gas. Some examples of this are given on p. 18 of Heat Transmission by Radiation, Conduction, and Convection. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works."







Boilers, Evaporators, and Condensers


Book Description

This up-to-date reference covers the thermal design, operation and maintenance of the three major components in industrial heating and air conditioning systems including fossil fuel-fired boilers, waste heat boilers and air conditioning evaporators. Among the distinguishing features covered are: the numerous types of components in use and the features and relative merits of each, overviews of the major technical sections of the book, with suggested approaches to design based on industrial experience, case studies and examples of actual engineering problems, design methods and procedures based on current industrial practice in the United States, Russia, China and Europe with data charts, tables and thermal-hydraulic correlations for design included, and various approaches to design based on experience in the art of industrial process equipment design.




Boilers, Evaporators, and Condensers


Book Description

This up-to-date reference covers the thermal design, operation and maintenance of the three major components in industrial heating and air conditioning systems including fossil fuel-fired boilers, waste heat boilers and air conditioning evaporators. Among the distinguishing features covered are: the numerous types of components in use and the features and relative merits of each, overviews of the major technical sections of the book, with suggested approaches to design based on industrial experience, case studies and examples of actual engineering problems, design methods and procedures based on current industrial practice in the United States, Russia, China and Europe with data charts, tables and thermal-hydraulic correlations for design included, and various approaches to design based on experience in the art of industrial process equipment design.




Combustion


Book Description




Kern's Process Heat Transfer


Book Description

This edition ensures the legacy of the original 1950 classic, Process Heat Transfer, by Donald Q. Kern that by many is held to be the gold standard. This second edition book is divided into three parts: Fundamental Principles; Heat Exchangers; and Other Heat Transfer Equipment/ Considerations. Part I provides a series of chapters concerned with introductory topics that are required when solving heat transfer problems. This part of the book deals with topics such as steady-state heat conduction, unsteady-state conduction, forced convection, free convection, and radiation. Part II is considered by the authors to be the "meat" of the book, and the primary reason for undertaking this project. Other than minor updates, Part II remains relatively unchanged from the first edition. Notably, it includes Kern's original design methodology for double-pipe, shell-and-tube, and extended surface heat exchangers. Part II also includes boiling and condensation, boilers, cooling towers and quenchers, as well as newly designed open-ended problems. Part III of the book examines other related topics of interest, including refrigeration and cryogenics, batch and unsteady-state processes, health & safety, and the accompanying topic of risk. In addition, this part also examines the impact of entropy calculations on exchanger design. A 36-page Appendix includes 12 tables of properties, layouts and design factors. WHAT IS NEW IN THE 2ND EDITION Changes that are addressed in the 2nd edition so that Kern's original work continues to remain relevant in 21st century process engineering include: Updated Heat Exchanger Design Increased Number of Illustrative Examples Energy Conservation/ Entropy Considerations Environmental Considerations Health & Safety Risk Assessment Refrigeration and Cryogenics