Masters Theses in the Pure and Applied Sciences


Book Description

Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.







Masters Theses in the Pure and Applied Sciences


Book Description

Cited in Sheehy, Chen, and Hurt . Volume 38 (thesis year 1993) reports a total of 13,787 thesis titles from 22 Canadian and 164 US universities. As in previous volumes, thesis titles are arranged by discipline and by university within each discipline. Any accredited university or college with a grad




Advanced Control of Power Converters


Book Description

Advanced Control of Power Converters Unique resource presenting advanced nonlinear control methods for power converters, plus simulation, controller design, analyses, and case studies Advanced Control of Power Converters equips readers with the latest knowledge of three control methods developed for power converters: nonlinear control methods such as sliding mode control, Lyapunov-function-based control, and model predictive control. Readers will learn about the design of each control method, and simulation case studies and results will be presented and discussed to point out the behavior of each control method in different applications. In this way, readers wishing to learn these control methods can gain insight on how to design and simulate each control method easily. The book is organized into three clear sections: introduction of classical and advanced control methods, design of advanced control methods, and case studies. Each control method is supported by simulation examples along with Simulink models which are provided on a separate website. Contributed to by five highly qualified authors, Advanced Control of Power Converters covers sample topics such as: Mathematical modeling of single- and three-phase grid-connected inverter with LCL filter, three-phase dynamic voltage restorer, design of sliding mode control and switching frequency computation under single- and double-band hysteresis modulations Modeling of single-phase UPS inverter and three-phase rectifier and their Lyapunov-function-based control design for global stability assurance Design of model predictive control for single-phase T-type rectifier, three-phase shunt active power filter, three-phase quasi-Z-source inverter, three-phase rectifier, distributed generation inverters in islanded ac microgrids How to realize the Simulink models in sliding mode control, Lyapunov-function-based control and model predictive control How to build and run a real-time model as well as rapid prototyping of power converter by using OPAL-RT simulator Advanced Control of Power Converters is an ideal resource on the subject for researchers, engineering professionals, and undergraduate/graduate students in electrical engineering and mechatronics; as an advanced level book, and it is expected that readers will have prior knowledge of power converters and control systems.




Advances of Science and Technology


Book Description

This two-volume set of LNICST 411 and 412 constitutes the refereed post-conference proceedings of the 9th International Conference on Advancement of Science and Technology, ICAST 2021, which took place in August 2021. Due to COVID-19 pandemic the conference was held virtually. The 80 revised full papers were carefully reviewed and selected from 202 submissions. The papers present economic and technologic developments in modern societies in 7 tracks: Chemical, Food and Bioprocess Engineering; Electrical and Electronics Engineering; ICT, Software and Hardware Engineering; Civil, Water Resources, and Environmental Engineering ICT; Mechanical and Industrial Engineering; Material Science and Engineering; Energy Science, Engineering and Policy.




Power Quality - New Insights


Book Description

This Edited Volume Power Quality - New Insights is a collection of reviewed and relevant research chapters, offering a comprehensive overview of recent developments in the field of engineering. The book comprises single chapters authored by various researchers and edited by an expert active in the power quality research area. All chapters are complete in themselves but united under a common research study topic. This publication aims to provide a thorough overview of the latest research efforts by international authors on power quality and open new possible research paths for further novel developments.




Science Abstracts


Book Description




Filter Design for System Modeling, State Estimation and Fault Diagnosis


Book Description

Filter Design for System Modeling, State Estimation and Fault Diagnosis analyzes the latest methods in the design of filters for system modeling, state estimation and fault detection with the intention of providing a new perspective of both theoretical and practical aspects. This book also includes fault diagnosis techniques for unknown but bounded systems, their real applications on modeling and fault diagnosis for lithium battery systems, DC-DC converters and spring damping systems. It proposes new methods based on zonotopic Kalman filtering, a variety of state estimation methods of zonotope and its derived algorithms, a state estimation method based on convex space, set inversion interval observer filtering-based guaranteed fault estimation and a novel interval observer filtering-based fault diagnosis. The methods presented in this text are more practical than the common probabilistic-based algorithms, since these can be applied in unknown but bounded noisy environments. This book will be an essential read for students, scholars and engineering professionals who are interested in filter design, system modeling, state estimation, fault diagnosis and related fields.







Hierarchical Protection for Smart Grids


Book Description

A systematic view of hierarchical protection for smart grids, with solutions to tradition protection problems and complicated operation modes of modern power systems • Systematically investigates traditional protection problems from the bird’s eye view of hierarchical protection • Focuses on multiple variable network structures and complicated operation modes • Offers comprehensive countermeasures on improving protection performance based on up-to-date research