High performance concrete recommended extensions to the model code 90 research needs


Book Description

The report has been prepared by the Joint Working Group on High Strength/High Performance Concrete, set up by CEB and FIP and comprising 15 experts from Europe, North America, Japan and Australia. Part one 'Recommended Extensions to Model Code 90' identifies the lacuna in existing regulations and proposes supplementary or alternative solutions to be applied with caution for concrete grades above C 50. In order to facilitate its use the report is edited in two columns following the numbering of the CEB-FIP Model Code 1990. It will be presented for approval to the 30th CEB Plenary Session in Berlin, September 1995. Part two identifies the research needs resulting from those clauses of Model Code 90 which needed amendments. Also more basic research needed for a better understanding of mechanical, physical and chemical processes which cannot be connected directly to a short-term application has been included."--Back cover.




High Performance Concrete


Book Description




Lightweight Aggregate Concrete - Recommended extensions to Model Code 90, Identification of research needs & Case studies


Book Description

"In 1993, the CEB Commission 2 Material and Behavior Modelling established the Task Group 2.5 Bond Models. It's terms of reference were ... to write a state-of-art report concerning bond of reinforcement in concrete and later recommend how the knowledge could be applied in practice (Model Code like text proposal)... {This work} covers the first part ... the state-of-art report."--Pref.




Steel and Composite Structures


Book Description

Over 150 papers representing the most recent international research findings on steel and composite structures. Including steel constructions; buckling and stability; codes; composite; control; fatigue and fracture; fire; impact; joints; maintenance; plates and shells; retrofitting; seismic; space structures; steel; structural analysis; structural components and assemblies; thin-walled structures; vibrations, and wind. A special session is dedicated on codification. A valuable source of information to researchers and practitioners in the field of steel and composite structures.




Constitutive Modelling of High Strength/high Performance Concrete


Book Description

High Strength/High Performance Concrete (HSC/HPC) continues to be the object of particular interest and extensive research, and its use in construction is increasing continuously. fib Bulletin 42 summarises the available information on the material behaviour of HSC/HPC, and develops a set of code-type constitutive relations as an extension of CEB-FIP Model Code 1990. Literature on experimental data and international guidelines, standards and recommendations were reviewed, and already-existing constitutive relations and models were evaluated. In addition to a number of material laws chosen and adjusted for this report, some new constitutive relations were developed based on the collected data. The criteria for the choice of the existing relations as well as the development of the new constitutive relations involved their simplicity and operationality (code-type mathematical formulations). Furthermore, they had to be physically sound and if possible describe the behaviour of both high-performance and normal strength concretes by a unique relation. Finally, compliance with the specifications given in the CEB-FIP Model Code 1990 was examined. This State-of-art report is intended for engineers and represents a summary of the relevant knowledge available to and possessed by the members of the Task Group at the time of its drafting.




Tubular Structures XII


Book Description

Presentation of the latest scientific and engineering developments in the field of tubular steel structures. Covers key and emerging subjects of hollow structural sections, such as: static and fatigue behaviour of connections/joints, concrete filled hollow sections and composite tubular members, offshore structures, earthquake resistance,




Seismic Design and Practice into the Next Century


Book Description

The papers, from 18 countries in Europe and elsewhere, contain discussions of quite radical innovations in material technology, design philosophy, experimental techniques and analytical approaches that will affect seismic design practice into the next century. Papers are organised into 9 sections: Ground motion and seismic hazard studies; Seismic design of foundations; Seismic design of steel, concrete and masonry buildings; Seismic design of offshore, nuclear and petrochemical installations; Seismic design of bridges, dock and power station structures; Repair and strengthening of bridges and buildings; Active and passive methods of seismic control; Dynamic testing methods; Seismic codes of practice. The proceedings will provide essential material for all those from both industrial and research organisations needing to keep in touch with the state-of-the-art in earthquake engineering and related earch sciences.




Bond of Reinforcement in Concrete


Book Description

"In 1993, the CEB Commission 2 Material and Behavior Modelling established the Task Group 2.5 Bond Models. It's terms of reference were ... to write a state-of-art report concerning bond of reinforcement in concrete and later recommend how the knowledge could be applied in practice (Model Code like text proposal)... {This work} covers the first part ... the state-of-art report."--Pref.




8th PhD Symposium in Copenhagen Denmark


Book Description




Ductility of reinforced concrete structures


Book Description