High-Speed Optical Receivers with Integrated Photodiode in Nanoscale CMOS


Book Description

This book describes the design of optical receivers that use the most economical integration technology, while enabling performance that is typically only found in very expensive devices. To achieve this, all necessary functionality, from light detection to digital output, is integrated on a single piece of silicon. All building blocks are thoroughly discussed, including photodiodes, transimpedance amplifiers, equalizers and post amplifiers.




Broadband Opto-Electrical Receivers in Standard CMOS


Book Description

This book opens with the basics of the design of opto-electronic interface circuits. The text continues with an in-depth analysis of the photodiode, transimpedance amplifier (TIA) and limiting amplifier (LA). To thoroughly describe light detection mechanisms in silicon, first a one-dimensional and second a two-dimensional model is developed. All material is experimentally verified with several CMOS implementations, with ultimately a fully integrated Gbit/s optical receiver front-end including photodiode, TIA and LA.




Optoelectronic Circuits in Nanometer CMOS Technology


Book Description

This book describes the newest implementations of integrated photodiodes fabricated in nanometer standard CMOS technologies. It also includes the required fundamentals, the state-of-the-art, and the design of high-performance laser drivers, transimpedance amplifiers, equalizers, and limiting amplifiers fabricated in nanometer CMOS technologies. This book shows the newest results for the performance of integrated optical receivers, laser drivers, modulator drivers and optical sensors in nanometer standard CMOS technologies. Nanometer CMOS technologies rapidly advanced, enabling the implementation of integrated optical receivers for high data rates of several Giga-bits per second and of high-pixel count optical imagers and sensors. In particular, low cost silicon CMOS optoelectronic integrated circuits became very attractive because they can be extensively applied to short-distance optical communications, such as local area network, chip-to-chip and board-to-board interconnects as well as to imaging and medical sensors.




High-Speed Photodiodes in Standard CMOS Technology


Book Description

High-speed Photodiodes in Standard CMOS Technology describes high-speed photodiodes in standard CMOS technology which allow monolithic integration of optical receivers for short-haul communication. For short haul communication the cost aspect is important , and therefore it is desirable that the optical receiver can be integrated in the same CMOS technology as the rest of the system. If this is possible then ultimately a singe-chip system including optical inputs becomes feasible, eliminating EMC and crosstalk problems, while data rate can be extremely high. The problem of photodiodes in standard CMOS technology it that they have very limited bandwidth, allowing data rates up to only 50Mbit per second. High-speed Photodiodes in Standard CMOS Technology first analyzes the photodiode behaviour and compares existing solutions to enhance the speed. After this, the book introduces a new and robust electronic equalizer technique that makes data rates of 3Gb/s possible, without changing the manufacturing technology. The application of this technique can be found in short haul fibre communication, optical printed circuit boards, but also photodiodes for laser disks.




Analog Circuits for Machine Learning, Current/Voltage/Temperature Sensors, and High-speed Communication


Book Description

This book is based on the 18 tutorials presented during the 29th workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, with specific contributions focusing on analog circuits for machine learning, current/voltage/temperature sensors, and high-speed communication via wireless, wireline, or optical links. This book serves as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.




CMOS Receiver Front-ends for Gigabit Short-Range Optical Communications


Book Description

This book describes optical receiver solutions integrated in standard CMOS technology, attaining high-speed short-range transmission within cost-effective constraints. These techniques support short reach applications, such as local area networks, fiber-to-the-home and multimedia systems in cars and homes. The authors show how to implement the optical front-end in the same technology as the subsequent digital circuitry, leading to integration of the entire receiver system in the same chip. The presentation focuses on CMOS receiver design targeting gigabit transmission along a low-cost, standardized plastic optical fiber up to 50m in length. This book includes a detailed study of CMOS optical receiver design – from building blocks to the system level.




Optical Communication over Plastic Optical Fibers


Book Description

This book presents high-performance data transmission over plastic optical fibers (POF) using integrated optical receivers having good properties with multilevel modulation, i.e. a higher sensitivity and higher data rate transmission over a longer plastic optical fiber length. Integrated optical receivers and transmitters with high linearity are introduced for multilevel communication. For binary high-data rate transmission over plastic optical fibers, an innovative receiver containing an equalizer is described leading also to a high performance of a plastic optical fiber link. The cheap standard PMMA SI-POF (step-index plastic optical fiber) has the lowest bandwidth and the highest attenuation among multimode fibers. This small bandwidth limits the maximum data rate which can be transmitted through plastic optical fibers. To overcome the problem of the plastic optical fibers high transmission loss, very sensitive receivers must be used to increase the transmitted length over POF. The plastic optical fiber limited bandwidth problem can be decreased by using multilevel signaling like multilevel pulse amplitude modulation or by using an equalizer for binary data transmission.




High Performance CMOS Integrated Circuits for Optical Receivers


Book Description

Optical communications is expanding into new applications such as infrared wireless communications; therefore, designing high performance circuits has gained considerable importance. In this dissertation a wide dynamic-range variable-gain transimpedance amplifier (TIA) is introduced. It adopts a regulated cascode (RGC) amplifier and an operational transconductance amplifier (OTA) as the feed forward gain element to control gain and improve the overload of the optical receiver. A fully-differential variable-gain TIA in a 0.35[micron] CMOS technology is realized. It provides a bit error rate (BER) less than 10-12 for an input current from 6[mu]A-3mA at 3.3V power supply. For the transimpedance gain variation, from 0.1k[omega] to 3k[omega], -3dB bandwidth is higher than 1.7GHz for a 0.6pF photodiode capacitance. The power dissipations for the highest and the lowest gains are 8.2mW and 24.9mW respectively. A new technique for designing uniform multistage amplifiers (MA) for high frequency applications is introduced. The proposed method uses the multi-peak bandwidth enhancement technique while it employs identical, simple and inductorless stages. It has several advantages, such as tunability of bandwidth and decreased sensitivity of amplifier stages, to process variations. While all stages of the proposed MA topology are identical, the gain-bandwidth product can be extended several times. Two six-stage amplifiers in a TSMC 0.35[micron] CMOS process were designed using the proposed topology. Measurements show that the gain can be varied for the first one between 16dB and 44dB within the 0.7-3.2GHz bandwidth and for the second one between 13dB and 44dB within a 1.9-3.7GHz bandwidth with less than 5.2nV/[square root]Hz noise. Although the second amplifier has a higher gain bandwidth product, it consumes more power and occupies a wider area. A technique for capacitance multiplication is utilized to design a tunable loop filter. Current and voltage mode techniques are combined to increase the multiplication factor (M). At a high input dynamic range, M is adjustable and the capacitance multiplier performs linearly at high frequencies. Drain-source voltages of paired transistors are equalized to improve matching in the current mirrors. Measurement of a prototype loop filter IC in a 0.5[micron] CMOS technology shows 50[mu]A current consumption for M=50. Where 80pF capacitance is employed, the capacitance multiplier realizes an effective capacitance varying from 1.22nF up to 8.5nF.




Nanoscale Networking and Communications Handbook


Book Description

This comprehensive handbook serves as a professional reference as well as a practitioner's guide to today's most complete and concise view of nanoscale networking and communications. It offers in-depth coverage of theory, technology, and practice as they relate to established technologies and recent advancements. It explores practical solutions to a wide range of nanoscale networking and communications issues. Individual chapters, authored by leading experts in the field, address the immediate and long-term challenges in the authors' respective areas of expertise.




Developing and Applying Optoelectronics in Machine Vision


Book Description

Sensor technologies play a large part in modern life as they are present in security systems, digital cameras, smartphones, and motion sensors. While these devices are always evolving, research is being done to further develop this technology to help detect and analyze threats, perform in-depth inspections, and perform tracking services. Developing and Applying Optoelectronics in Machine Vision evaluates emergent research and theoretical concepts in scanning devices and 3D reconstruction technologies being used to measure their environment. Examining the development of the utilization of machine vision practices and research, optoelectronic devices, and sensor technologies, this book is ideally suited for academics, researchers, students, engineers, and technology developers.