Hughes XF-11 Pilot's Flight Operating Instructions


Book Description

The XF-11 was originally conceived as a dedicated reconnaissance aircraft, capable of high-speed penetration of enemy defenses. The plane's design benefited from research work by its builder, the brilliant and sometimes mercurial Howard Hughes. Inspired by an experimental aircraft he had created known as the DX-2, Hughes' XF-11 was a twin-engine, twin-boom, tricycle gear monoplane that featured a pressurized nacelle for its crew and 28-cylinder engines with contra-rotating props. Hughes piloted the XF-11 on its maiden flight, and was nearly killed when one of the props reversed pitch, and the plane crashed. Hughes recovered and piloted a second prototype, this one outfitted with conventional props, but the Air Force had already made up its mind: the XF-11 would never enter service. Originally printed by Hughes and the Air Force this handbook provides a fascinating glimpse inside the cockpit of this plane. This manual is declassified.




U-2 Dragon Lady Pilot's Flight Operating Instructions


Book Description

Conceived during the dark days of the Cold War, the U-2 is a single-engine,single-seat, surveillance aircraft. Designed by aeronautical engineer ¿Kelly¿ Johnson, the plane was used by the C.I.A. to photograph installations deep inside Soviet Russia. Known as the ¿Dragon Lady¿, the U-2 was classified. Its existence remained a secret until 1960, when a U-2 flown by Francis Gary Powers was shot down over Soviet territory. The U-2 went on to have a long and illustrious career. Upgraded airframes remained in use five decades after it first debuted. Originally printed by Lockheed and the U.S. Air Force in the 1960s, this Flight Operating Handbook taught pilots everything they needed to know before entering the cockpit. Classified ¿Restricted¿, the manual was recently declassified and is here reprinted in book form. This affordable facsimile has been slightly reformatted. Care has been taken however to preserve the integrity of the text.




Northrop X-4 Bantam Pilot's Flight Operating Instructions


Book Description

Designed without horizontal stabilizers, the X-4 Bantam had a semi-tailless design that bore some resemblance to Germany¿s Me-163 rocket plane. The small, twin-jet craft relied on combined elevator and aileron surfaces ¿ known as elevons ¿ for pitch and roll control. The role of the X-4 was to explore the transonic speed zone, and to determine whether the design would lessen the stability and control problems affiliated with compressibility. Although two Bantams were built, only one proved mechanically sound. The second was flown over eighty times by Northrop, Air Force and NACA pilots. They learned that the X-4 was sensitive in pitch, and showed a tendency to ¿hunt¿ about all three axes as it approached Mach 1.0. Thus, the X-4¿s design proved a failure. Originally printed by Northrop, NACA and the USAF, this handbook provides a fascinating glimpse inside the cockpit of this experimental plane. The manual was recently declassified and is here reprinted in book form.




T-38 Talon Pilot's Flight Operating Instructions


Book Description

Northrop¿s T-38 Talon was the world¿s first supersonic trainer aircraft, and remains in service today in air forces worldwide. It entered service in 1961, and quickly set climb records, earning it the nickname ¿white rocket¿. Nearly 1200 Talons were produced before the last one rolled off the assembly line in 1972. Capable of a speed of Mach 1.3, and a climb rate approaching 34,000 feet per minute, the T-38¿s performance was sufficient to warrant service as the USAF Thunderbirds¿ aircraft in the mid-1970s. Its primary role however, was as a dedicated training and proficiency platform. More than 50,000 USAF, NASA and NATO pilots have flown the Talon, a record that may never be matched. Originally printed by the U.S. Air Force and Northrop, this handbook for the T-38 provides a fascinating glimpse inside the cockpit of this famous aircraft. Originally classified ¿restricted¿, the manual was recently declassified and is here reprinted in book form.







Chance Vought F7U Cutlass Pilot's Flight Operating Instructions


Book Description

Chance-Vought¿s F7U Cutlass was inspired by design data retrieved from Germany¿s Arado Company at the end of WWII. To avoid extreme nose-down forces, the Cutlass was a ¿tail-less¿ aircraft. Its swept wings had vertical fins and ¿ailevator¿ control surfaces. Although intended to operate at up to Mach .95, the aircraft was hampered by under- powered Westinghouse turbojets, and its nose-up profile made carrier landings dangerous. Although its in-flight performance was acceptable, the Navy initially rejected the plane as unfit for carrier use. While nearly 200 F7U-3s were eventually delivered, they were retired only five years after their introduction. Originally printed by the U.S. Navy, this F7U-3 Flight Operating Manual taught pilots everything they needed to know before entering the cockpit. Classified ¿Restricted¿, it was recently de- classified and is here reprinted in book form. This facsimile has been reformatted. Care has been taken however to preserve the integrity of the text.




Operating Instructions for Pilots


Book Description

Operating instructions for a fighter plane.




North American X-15 Pilot's Flight Operating Instructions


Book Description

North American Aviation's X-15 rocket plane flew at Mach 6.72 and at altitudes above 67 miles -- at the threshold of space. The men who piloted this amazing plane became the USAF's first astronauts. Powered by an XLR-99 engine capable of producing 70,000 pounds of thrust at peak altitude, the X-15 pushed the flight envelope for manned aircraft past the post office. Notably, both Apollo astronaut Neil Armstrong and Space Shuttle commander Joe Engle piloted the X-15. Originally published by North American for the USAF and later NASA, this Flight Operating Handbook represents a 1963 update of the original version first printed in 1961. Just recently declassified, it provides a revealing look into one of history's great planes. Also included in this edition is a rare X-15 rescue manual made for the plane's ground crew. Please note: due to the archival nature of some portions of the original documents, image and text quality may vary. Care has been taken to preserve the integrity of the text.




Howard Hughes and the Spruce Goose


Book Description

Howard Hughes' life ambition was to make a significant contribution to the field of aviation development. But the monumental folly of his endeavours on the H-KI Hercules meant that he came to be known and remembered to a great extent for all the wrong reasons. The 'Spruce Goose' (a name Hughes detested) became a product of his wild fixation on perfection and scale. Once completed, it was the largest flying machine ever built. Its wingspan of 320 feet remains the largest in history. Yet it only completed one flight; flying for a mile on its maiden voyage above Long Beach Harbour, before being consigned to the history books as a failure.Experienced author Graham M. Simons turns his attention to the production process that saw this colossus take shape. In words and images, all aspects of this process are illustrated. We have shots taken during the initial design period, images of the craft under construction, and photographs taken at the test flights. In addition, Simons has been gifted access to the highly prized and rarely seen aircraft manual produced for the aircraft, content from which has been extracted and used to supplement the narrative.The book goes on to explore the political issues that sprung up as a result of Hughes' endeavours, looking into the Senate War Investigations Committee's findings which explored the extent to which government funds had been utilised in the development and construction of the airship, adding a whole new layer of controversy to the proceedings.




Investigation of the National Defense Program


Book Description