Book Description
MOP 97 presents the ideas behind model design and use for a broad spectrum of hydraulic modeling methods.
Author : R. Ettema
Publisher : Amer Society of Civil Engineers
Page : 390 pages
File Size : 50,32 MB
Release : 2000
Category : Technology & Engineering
ISBN : 9780784404157
MOP 97 presents the ideas behind model design and use for a broad spectrum of hydraulic modeling methods.
Author : Lori Armstrong
Publisher : ESRI Press
Page : 0 pages
File Size : 33,86 MB
Release : 2012
Category : TECHNOLOGY & ENGINEERING
ISBN : 9781589483019
GIS and hydraulic modeling are complementary technologies. By integrating them with each other, water utility companies can reap substantial time and cost savings. A well-designed integration of the two systems provides ready access to mission-critical data. As a result, risk-of-failure analysis, repair and replacement, capacity assessment, capital improvement planning, and numerous other water utility applications run more efficiently and more effectively. Hydraulic Modeling and GIS identifies the challenges that must be navigated and offers best practices for achieving an integration that will be sustainable over the long term.
Author : David R. Maidment
Publisher : ESRI, Inc.
Page : 232 pages
File Size : 43,65 MB
Release : 2000
Category : Computers
ISBN : 9781879102804
Digital elevation model issues in water resources modeling - Preparation of DEMs for use in environmental modeling analysis - Source water protection project : a comparison of watershed delineation methods in ARC/INFO and arcView GIS - DEM preprocessing for efficient watershed delineation - Gis tools for HMS modeling support - Hydrologic model of the buffalo bayou using GIS - Development of digital terrain representation for use in river modeling - HEC-GeoRAS : linking GIS to hydraulic analysis using ARC/INFO and HEC-RAS - Floodplain determination using arcView GIS and HEC-RAS - The accuracy and efficiency of GIS-Based floodplain determinations.
Author : Taro Arikawa
Publisher : CRC Press
Page : 251 pages
File Size : 49,8 MB
Release : 2024-04-17
Category : Technology & Engineering
ISBN : 1003814719
This edited volume from Japan’s Research Subcommittee on Methodology for Dealing with Geomaterials in Hydraulic Model Experiments presents readers with a state-of-the-art overview of experimental and computational methods used to address similarity scaling incompatibilities present in fluid–sediment flows. Readers will gain an understanding of complex phenomena in the boundary fields of hydraulics and geotechnical engineering. Chapter contributors focus on the phenomena that are affected by the interactions between fluid wave and ground in a complex field, which for many years have been challenging to process and model. In addition to describing the implementation of model tests and the concept of the law of similarity, this book contrasts these phenomena with the laws of similarity, describes models and numeral analysis methods, and explains important considerations using experimental case studies. Each chapter is written by leading researchers in Japan who are members of the Research Subcommittee on Methodology for Dealing with Geomaterials in Hydraulic Model Experiments. The chapters are closely linked but are written so that each can be read individually. Readers will be able to apply this knowledge to their work and to create models that more accurately simulate the interactions between wave and ground, allowing them to better understand these phenomena and devise more appropriate strategies for defense and so on when necessary. This collection provides information that can be used by young researchers and post-graduate students in the boundary fields of hydraulics and geotechnical engineering who aim at becoming civil engineers, and it will be of particular value to practicing engineers of all experience levels who must regularly analyze complex interactions between fluids and ground.
Author : Victor M. Lyatkher
Publisher : John Wiley & Sons
Page : 608 pages
File Size : 13,13 MB
Release : 2016-05-02
Category : Political Science
ISBN : 1118946219
Water. Except for air, it is the most important ingredient to all life on Earth. It surrounds us every day. We are literally bathed in it, we cook our food with it, and we need a steady stream of it in our bodies every single day just to survive. But water, and the study of it, is one of the most important and unheralded branches of engineering, affecting every other aspect of engineering in almost every industry. We harness its power for energy, we inject massive blasts of it into the earth to extract oil, gas, and minerals, and we use it in nearly every single industrial application, including food processing, refining, manufacturing, and waste disposal, just to name a few. Hyraulic modeling is, essentially, the understanding and prediction of fluid flow and its applications in industrial, municipal, and environmental settings, whether in a creekbed, locked in the pores of rocks deep in the earth, or in the ocean. Mathematical models, which started out with mechanical pencils and drafting tables originally, have been increasingly relied upon over the last few decades, due to the invention, growth, and refinement of computers. Physical modeling, however, is still practiced in laboratories, and it is the intersection of physical and mathematical modeling of fluid flow that is most successful in creating models that are safer, less costly, and are better for the environment. Hydraulic Modeling introduces and explores this incredibly important science, from the most basic tenets to valuable real-world applications that are used in industry today. It is the only volume on the market to offer a thorough coverage of the subject without adding lots of useless fluff or inapplicable appendices. It is a must-have for any engineer, scientist, or student working with hydraulic modeling, as a daily reference or a textbook.
Author : Yu-Shu Wu
Publisher : Gulf Professional Publishing
Page : 568 pages
File Size : 14,23 MB
Release : 2017-11-30
Category : Technology & Engineering
ISBN : 0128129999
Hydraulic Fracture Modeling delivers all the pertinent technology and solutions in one product to become the go-to source for petroleum and reservoir engineers. Providing tools and approaches, this multi-contributed reference presents current and upcoming developments for modeling rock fracturing including their limitations and problem-solving applications. Fractures are common in oil and gas reservoir formations, and with the ongoing increase in development of unconventional reservoirs, more petroleum engineers today need to know the latest technology surrounding hydraulic fracturing technology such as fracture rock modeling. There is tremendous research in the area but not all located in one place. Covering two types of modeling technologies, various effective fracturing approaches and model applications for fracturing, the book equips today's petroleum engineer with an all-inclusive product to characterize and optimize today's more complex reservoirs. - Offers understanding of the details surrounding fracturing and fracture modeling technology, including theories and quantitative methods - Provides academic and practical perspective from multiple contributors at the forefront of hydraulic fracturing and rock mechanics - Provides today's petroleum engineer with model validation tools backed by real-world case studies
Author : Ioana Popescu
Publisher : IWA Publishing
Page : 184 pages
File Size : 33,25 MB
Release : 2014-08-14
Category : Science
ISBN : 1780400446
Computational Hydraulics introduces the concept of modeling and the contribution of numerical methods and numerical analysis to modeling. It provides a concise and comprehensive description of the basic hydraulic principles, and the problems addressed by these principles in the aquatic environment. Flow equations, numerical and analytical solutions are included. The necessary steps for building and applying numerical methods in hydraulics comprise the core of the book and this is followed by a report of different example applications of computational hydraulics: river training effects on flood propagation, water quality modelling of lakes and coastal applications. The theory and exercises included in the book promote learning of concepts within academic environments. Sample codes are made available online for purchasers of the book. Computational Hydraulics is intended for under-graduate and graduate students, researchers, members of governmental and non-governmental agencies and professionals involved in management of the water related problems. Author: Ioana Popescu, Hydroinformatics group, UNESCO-IHE Institute for Water Education, Delft , The Netherlands.
Author : Mehmet Selim Yalin
Publisher :
Page : 266 pages
File Size : 17,85 MB
Release : 1971
Category : Hydraulic models
ISBN : 9780333035573
For graduate students, research workers and practising engineers in the design of hydraulic structures and designing water works.
Author : Pavel Novak
Publisher : CRC Press
Page : 614 pages
File Size : 27,74 MB
Release : 2010-01-22
Category : Technology & Engineering
ISBN : 0203861620
Modelling forms a vital part of all engineering design, yet many hydraulic engineers are not fully aware of the assumptions they make. These assumptions can have important consequences when choosing the best model to inform design decisions. Considering the advantages and limitations of both physical and mathematical methods, this book will help you identify the most appropriate form of analysis for the hydraulic engineering application in question. All models require the knowledge of their background, good data and careful interpretation and so this book also provides guidance on the range of accuracy to be expected of the model simulations and how they should be related to the prototype. Applications to models include: open channel systems closed conduit flows storm drainage systems estuaries coastal and nearshore structures hydraulic structures. This an invaluable guide for students and professionals.
Author : Medhat Khalil
Publisher : Compudraulic LLC
Page : 360 pages
File Size : 41,21 MB
Release : 2020-06
Category : Technology & Engineering
ISBN : 9780997763430
The book adopted lumped modeling technique, using Matlab-Simulink, to model discrete hydraulic components that can be re-characterized and used repeatedly in system models.