Next Generation Mobile Communications Ecosystem


Book Description

Taking an in-depth look at the mobile communications ecosystem, this book covers the two key components, i.e., Network and End-User Devices, in detail. Within the network, the sub components of radio access network, transmission network, core networks, services and OSS are discussed; component level discussion also features antenna diversity and interference cancellation techniques for smart wireless devices. The role of various standard development organizations and industry forums is highlighted throughout. The ecosystem is strengthened with the addition of the Technology Management (TM) component dealing mostly with the non-technical aspects of the underlying mobile communications industry. Various aspects of TM including technology development, innovation management, knowledge management and more are also presented. Focuses on OFDM-based radio technologies such as LTE & WiMAX as well as MBWA (Mobile Broadband Wireless Access) Provides a vital addition to the momentum of EVDO and its migration towards LTE Emphasis on radio, core, operation, architectural and performance aspects of two next generation technologies - EPS and WiMAX Includes discussion of backhaul technologies and alternatives as well as issues faced by operators switching to 3G and Next Generation Mobile Networks Cutting-edge research on emerging Gigabit Ethernet Microwave Radios and Carrier Ethernet transport technologies Next Generation Mobile Communications Ecosystem serves as a practical reference for telecom associated academia and industry to understanding mobile communications in a holistic manner, as well as assisting in preparing graduate students and fresh graduates for the marketplace by providing them with information not only on state-of-the-art technologies and standards but also on TM. By effectively focusing on the key domains of TM this book will further assist companies with improving their competitiveness in the long run. Importantly, it will provide students, engineers, researchers, technology managers and executives with extensive details on various emerging mobile wireless standards and technologies.




The Read-Out Controller ASIC for the ATLAS Experiment at LHC


Book Description

This thesis presents the complete chain from specifications to real-life deployment of the Read Out Controller (ROC) ASIC for the ATLAS Experiment at LHC, including the design of the FPGA-based setup used for prototype validation and mass testing of the approximately 6000 chips. Long-lasting experiments like the ATLAS at the LHC undergo regular upgrades to improve their performance over time. One of such upgrades of the ATLAS was the replacement of a fraction of muon detectors in the forward rapidities to provide much-improved reconstruction precision and discrimination from background protons. This new instrumentation (New Small Wheel) is equipped with custom-designed, radiation-hard, on-detector electronics with the Read Out Controller chip being a mission-critical element. The chip acts as a clock and control signals distributor and a concentrator, buffer, filter and real-time processor of detector data packets. The described and deployed FPGA-based test setup emulates the asynchronous chip context and employs optimizations and automatic clock and data synchronization. The chip's tolerance to nuclear radiation was evaluated by recording its operation while controlled ultrafast neutron beams were incident to its silicon die. Predictions for the operating environment are made. A proposed implementation of an FPGA Integrated Logic Analyzer that mitigates the observed limitations and constraints of the existing ones is included.




Remote Powering and Data Communication for Implanted Biomedical Systems


Book Description

This book describes new circuits and systems for implantable biomedical applications and explains the design of a batteryless, remotely-powered implantable micro-system, designed for long-term patient monitoring. Following new trends in implantable biomedical applications, the authors demonstrate a system which is capable of efficient, remote powering and reliable data communication. Novel architecture and design methodologies are used to transfer power with a low-power, optimized inductive link and data is transmitted by a reliable communication link. Additionally, an electro-mechanical solution is presented for tracking and monitoring the implantable system, while the patient is mobile.




Radio Receivers for Systems of Fixed and Mobile Communications


Book Description

The textbook acquaints the reader with the architecture of receivers of analog and digital radio systems, helps to study the stages of designing a modern radio receiver and reveals the reasons and methods for its effective operation in networks for various purposes. Particular attention is paid to the methods of generating and processing signals in the receivers of digital systems with multiple access, which make it possible to provide data transfer rates close to the maximum possible (according to Shannon). As a textbook for students studying methods of optimal signal reception, the book will also be useful to specialists in the field of telecommunications involved in the development of radio receivers. The book shows how the development of theoretical, circuitry and integrated technologies led to the active introduction of algorithmic methods for signal processing changed both the design of receivers and the methods of forming the information flow in free space (MIMO, beamforming). The creation of a global 5G network based on heterogeneous networks puts forward new requirements for the architecture of receivers, which are determined by the requirements to achieve high data rates, low time delays or use in networks with coordinated multipoint transmission and reception (CoMP). To consolidate the knowledge gained, the book includes a complete set of materials for online classes, including questions and answers, a guide to solving problems for each chapter, and computer modeling units of receivers in the MicroCAP environment, based on preliminary calculations.




IEEE Guide on Shielding Practice for Low Voltage Cables


Book Description

A concise overview of shielding options for various types of interference and recommendations on shielding practices, including suggestions on terminating and grounding methods, are provided.




Optical Fiber Telecommunications Volume VIA


Book Description

Optical Fiber Telecommunications VI (A&B) is the sixth in a series that has chronicled the progress in the R&D of lightwave communications since the early 1970s. Written by active authorities from academia and industry, this edition brings a fresh look to many essential topics, including devices, subsystems, systems and networks. A central theme is the enabling of high-bandwidth communications in a cost-effective manner for the development of customer applications. These volumes are an ideal reference for R&D engineers and managers, optical systems implementers, university researchers and students, network operators, and investors. Volume A is devoted to components and subsystems, including photonic integrated circuits, multicore and few-mode fibers, photonic crystals, silicon photonics, signal processing, and optical interconnections.







IEEE Recommended Practice for Monitoring Electric Power Quality


Book Description

Abstract: This recommended practice encompasses the monitoring of electrical characteristics of single-phase and polyphase ac power systems. It includes consistent descriptions of conducted electromagnetic phenomena occurring on power systems. This recommended practice describes nominal conditions and deviations from these nominal conditions that may originate within the source of supply or load equipment or may originate from interactions between the source and the load. Also, this recommended practice discusses power quality monitoring devices, application techniques, and the interpretation of monitoring results. Keywords: assessment, compatibility, dip, distortion, electromagnetic phenomena, harmonics, imbalance, instruments, monitoring, power quality, rms variation, sag, swell, transient, unbalance.




A Digital Signal Processor for Particle Detectors


Book Description

To cope with the new running conditions in the ALICE experiment at the Large Hadron Collider at CERN, a new integrated circuit named SAMPA has been created that can process 32 analogue channels, convert them to digital, perform filtering and compression, and transmit the data on high speed links to the data acquisition system. The main purpose of this work is to specify, design, test and verify the digital signal processing part of the SAMPA device to accommodate the requirements of the detectors involved. Innovative solutions have been employed to reduce the bandwidth required by the detectors, as well as adaptations to ease data handling later in the processing chain. The new SAMPA device was built to replace two existing circuits, in addition to reducing the current consumption, and doubling the amount of processing channels. About 50000 of the devices will be installed in the Time Projection Chamber and Muon Chamber detectors in the ALICE experiment.




Electrical Safety Code Manual


Book Description

Safety in any workplace is extremely important. In the case of the electrical industry, safety is critical and the codes and regulations which determine safe practices are both diverse and complicated. Employers, electricians, electrical system designers, inspectors, engineers and architects must comply with safety standards listed in the National Electrical Code, OSHA and NFPA 70E. Unfortunately, the publications which list these safety requirements are written in very technically advanced terms and the average person has an extremely difficult time understanding exactly what they need to do to ensure safe installations and working environments. Electrical Safety Code Manual will tie together the various regulations and practices for electrical safety and translate these complicated standards into easy to understand terms. This will result in a publication that is a practical, if not essential, asset to not only designers and company owners but to the electricians who must put compliance requirements into action in the field. - Best-practice methods for accident prevention and electrical hazard avoidance - Current safety regulations, including new standards from OSHA, NEC, NESC, and NFPA - Information on low-, medium-, and high-voltage safety systems - Step-by-step guidelines on safety audits - Training program how-to's, from setup to rescue and first aid procedures