Guide to the Agreement on Uniform Vehicle Weights and Dimensions Limits in Atlantic Canada


Book Description

In June 2001, ministers responsible for vehicle weight & dimensions regulations within Atlantic Canada endorsed, in principle, a proposal which will lead to full implementation of uniform regulatory requirements throughout the region by the end of 2009. The proposed agreement includes weight & dimension limit standards and an implementation strategy. This publication is a guide to the provisions of the 2001 agreement and summarizes general dimensional & weight limits as well as limits for the following configurations: tractor semitrailer, tractor & two trailers, straight trucks, truck-pony trailer combinations, truck-full trailer combinations, tandem steering axel truck combinations with full or pony trailers, and intercity buses.




Review of Canadian Experience with the Regulation of Large Commercial Motor Vehicles


Book Description

TRB's National Cooperative Highway Research Program (NCHRP) Report 671: Review of Canadian Experience with the Regulation of Large Commercial Motor Vehicles examines the process used in Canada to harmonize heavy truck size and weight regulations across the country. The report provides insights on how lessons learned from the Canadian experience might be applied in the United States.




Vehicle Weight and Dimension Reform and Mode Choice in Canada


Book Description

The movement of goods across Canada by road is restricted by different combinations of vehicle weight and dimension (VWD) regulations set by the various provincial and territorial governments. Uniform regulations to facilitate truck movement across the country are of prime concern for both federal and provincial levels of government as well as the trucking and railway industries. Proposed VWD regulation scenarios by the Roads and Transportation Association of Canada (RTAC) have been developed towards this purpose, and in February 1988 the national Council of Transportation Ministers adopted a set of uniform regulations to be implemented acroos Canada. In addition, the four western provinces have agreed to further changes in VWD regulations allowing greater weights and dimensions for road transportation in Western Canada. This study will develop and present a mathematical model using the most recent data available, to forecast the effects of changing trucking service characteristics as a result of these agreements on the market share of freight carried by trucking and railway modes in the commodity classification Fabricated materials, inedible. Model development will involve the use of origin/destination socio-economic indicators and modal service variables in combination with published freight tonnage statistics for interprovincial movement in the Statistics Canada classification Fabricated materials, inedible. The developed model will be used to determine the impact on the freight transportation market of the proposed VWD regulations approved by the Council of Transportation Ministers and those approved in the Western Agreement. This study is an attempt to identify the impact of these proposed regulations on the competing railway and trucking modes. Specifically, the impacts of the proposed regulations on the rail transportation industry and the necessary improvements in its service characteristics to retain rail's existing market share of freight will be determined. For the covering abstract of this Conference see IRRD abstract number 853851.













Regulation of Weights, Lengths, and Widths of Commercial Motor Vehicles


Book Description

TRB Special Report 267 - Regulation of Weights, Lengths, and Widths of Commercial Motor Vehicles recommends the creation of an independent public organization to evaluate the effects of truck traffic, pilot studies of new truck designs, and a change in federal law authorizing states to issue permits for operation of larger trucks on the Interstates. In 1991, Congress placed a freeze on maximum truck weights and dimensions. Some safety groups were protesting against the safety implications of increased truck size and weight, and the railroads were objecting to the introduction of vehicles they deemed to have an unfair advantage. Railroads, unlike trucking firms, must pay for the capital costs of their infrastructure. The railroads contend that large trucks do not pay sufficient taxes to compensate for the highway damage they cause and the environmental costs they generate. Although Congress apparently hoped it had placed a cap on maximum truck dimensions in 1991, such has not proven to be the case. Carriers operating under specific conditions have been able to seek and obtain special exceptions from the federal freeze by appealing directly to Congress (without any formal review of the possible consequences), thereby encouraging additional firms to seek similar exceptions. In the Transportation Equity Act for the 21st Century, Congress requested a TRB study to review federal policies on commercial vehicle dimensions. The committee that undertook the study that resulted in Special Report 267 found that regulatory analyses of the benefits and costs of changes in truck dimensions are hampered by a lack of information. Regulatory decisions on such matters will always entail a degree of risk and uncertainty, but the degree of uncertainty surrounding truck issues is uunusually high and unnecessary. The committee concluded that the uncertainty could be alleviated if procedures were established for carrying out a program oof basic and applied research, and if evaluation and monitoring were permanent components of the administration of trucking regulations. The committee recommended immediate changes in federal regulations that would allow for a federally supervised permit program. The program would permit the operation of vehicles heavier than would normally be allowed, provided that the changes applied only to vehicles with a maximum weight of 90,000 pounds, double trailer configurations with each trailer up to 33 feet, and an overall weight limit governed by the federal bridge formula. Moreover, enforcement of trucks operating under such a program should be strengthened, and the permits should require that users pay the costs they occasion. States should be free to choose whether to participate in the permit program. Those that elected to do so would be required to have in place a program of bridge management, safety monitoring, enforcement, and cost recovery, overseen by the federal government. The fundamental problem involved in evaluating proposals for changes in truck dimensions is that their effects can often only be estimated or modeled. The data available for estimating safety consequences in particular are inadequate and probably always will be. Thus, the committee that conducted this study concluded that the resulting analyses usually involve a high degree of uncertainty. What is needed is some way to evaluate potential changes through limited and carefully controlled trials, much as proposed new drugs are tested before being allowed in widespread use. The committee recommended that a new independent entity be created to work with private industry in evaluating new concepts and recommending changes to regulatory agencies. Limited pilot tests would be required, which would need to be carefully designed to avoid undue risks and ensure proper evaluation. Special vehicles could be allowed to operate under carefully controlled circumstances, just as oversize and overweight vehicles are allowed to operate under special permits in many states. Changes in federal laws and regulations would be required to allow states to issue such permits on an expanded network of highways, under the condition that a rigorous program of monitoring and evaluation be instituted.Special Report 269 Summary