Advances in Manufacturing Engineering and Materials II


Book Description

This book reports on cutting-edge research and technologies in the field of advanced manufacturing and materials, with a special emphasis on unconventional machining process, rapid prototyping and biomaterials. It gathers contributions to the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), which was originally planned in June 2020, but will actually take place in 2021, in Nový Smokovec, Slovakia, because of the Covid-19 pandemic. Despite the challenging times, submitted contributions were peer-reviewed, and upon a careful revision, included in this book, which covers advances that are expected to increase the industry’s competitiveness with regard to sustainable development and preservation of the environment and natural resources. Condition monitoring, industrial automation, and diverse fabrication processes such as welding, casting and molding, as well as tribology and bioengineering, are just a few of the topics discussed in the book’s wealth of authoritative contributions. A special emphasis is given to problems connected to climate change and solution manufacturer and engineers may adopt and develop to prevent and cope with them.




Recent Advances in Materials and Manufacturing Technologies


Book Description

International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT 2018) Selected, peer reviewed papers from the 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (ICRAMMT-2018), November 19-20, 2018, Hyderabad, India




Advances in Materials, Mechanics and Manufacturing


Book Description

This book reports on cutting-edge findings concerning characterization of material behavior, material modeling and simulation, and applications in the field of manufacturing. Based on the second International Conference on Advanced Materials Mechanics & Manufacturing, A3M2018, organized by the Laboratory of Mechanics, Modeling and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia, the book covers a variety of topics, such as experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. It offers a timely snapshot on current research and applications, offering a bridge to facilitate communication and collaboration between academic and industrial researchers.




Advances in Materials, Mechanics and Manufacturing II


Book Description

This book reports on innovative materials research with a special emphasis on methods, modeling, and simulation tools for analyzing material behavior, emerging materials, and composites, and their applications in the field of manufacturing. Chapters are based on contributions to the third International Conference on Advanced Materials Mechanics and Manufacturing, A3M2021, organized by the Laboratory of Mechanics, Modeling, and Manufacturing (LA2MP) of the National School of Engineers of Sfax, Tunisia and held online on March 25-27, 2021. They cover a variety of topics, spanning from experimental analysis of material plasticity and fatigue, numerical simulation of material behavior, and optimization of manufacturing processes, such as cutting and injection, among others. Offering a good balance of fundamental research and industrially relevant findings, they provide researchers and professionals with a timely snapshot of and extensive information on current developments in the field and a source of inspiration for future research and collaboration.




Recent Advances in Manufacturing Engineering and Processes


Book Description

This book comprises select papers from the 10th International Conference on Manufacturing Engineering and Processes 2021. The contents of this volume focus on recent technological advances in the field of manufacturing engineering and processes including computer-aided design and manufacturing, environmentally sustainable manufacturing processes, composite materials manufacturing, and nanomaterials and nanomanufacturing. The contents cover latest advances especially in 3D printing and additive manufacturing techniques and processes for sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. This book proves a valuable resource for those in academia and industry.




Cell Culture Engineering


Book Description

Since the introduction of recombinant human growth hormone and insulin a quarter century ago, protein therapeutics has greatly broadened the ho- zon of health care. Many patients suffering with life-threatening diseases or chronic dysfunctions, which were medically untreatable not long ago, can attest to the wonder these drugs have achieved. Although the ?rst generation of p- tein therapeutics was produced in recombinant Escherichia coli, most recent products use mammalian cells as production hosts. Not long after the ?rst p- duction of recombinant proteins in E. coli, it was realized that the complex tasks of most post-translational modi?cations on proteins could only be ef?ciently carried out in mammalian cells. In the 1990s, we witnessed a rapid expansion of mammalian-cell-derived protein therapeutics, chie?y antibodies. In fact, it has been nearly a decade since the market value of mammalian-cell-derived protein therapeutics surpassed that of those produced from E. coli. A common characteristic of recent antibody products is the relatively large dose required for effective therapy, demanding larger quantities for the treatment of a given disease. This, coupled with the broadening repertoire of protein drugs, has rapidly expanded the quantity needed for clinical applications. The increasing demand for protein therapeutics has not been met exclusively by construction of new manufacturing plants and increasing total volume capacity. More - portantly the productivity of cell culture processes has been driven upward by an order of magnitude in the past decade.




Advanced Manufacturing and Materials


Book Description

2nd International Conference on Advanced Manufacturing and Materials (ICAMM 2018) Selected, peer reviewed papers from the 2nd International Conference on Advanced Manufacturing and Materials (ICAMM 2018), June 11-13, 2018, Tokyo, Japan




Advances in Materials and Manufacturing Engineering


Book Description

This book gathers outstanding papers presented at the International Conference on Advances in Materials and Manufacturing Engineering (ICAMME 2019), held at KIIT Deemed to be University, Bhubaneswar, India, from 15 to 17 March 2019. It covers theoretical and empirical developments in various areas of mechanical engineering, including manufacturing, production, machine design, fluid/thermal engineering, and materials.




Proceedings of the International Conference on Industrial and Manufacturing Systems (CIMS-2020)


Book Description

In order to deal with the societal challenges novel technology plays an important role. For the advancement of technology, Department of Industrial and Production Engineering under the aegis of NIT Jalandhar is organizing an “International Conference on Industrial and Manufacturing Systems” (CIMS-2020) from 26th -28th June, 2020. The present conference aims at providing a leading forum for sharing original research contributions and real-world developments in the field of Industrial and Manufacturing Systems so as to contribute its share for technological advancements. This volume encloses various manuscripts having its roots in the core of industrial and production engineering. Globalization provides all around development and this development is impossible without technological contributions. CIMS-2020, gathered the spirits of various academicians, researchers, scientists and practitioners, answering the vivid issues related to optimisation in the various problems of industrial and manufacturing systems.




Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022)


Book Description

This book presents selected, peer-reviewed proceedings of the 3rd International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022), held in the city of Can Tho, Vietnam, from 10 to 13 November 2022. The purpose of the conference is to explore and ensure an understanding of the critical aspects contributing to sustainable development with a focus on advanced mechanical engineering, automation, materials, machines and methods. The contributions published in this book come from authors representing universities, research institutes and industrial companies and reflect the results of a very broad spectrum of research, from micro- and nanoscale materials design and processing, to mechanical engineering technology in industry. Many of the contributions selected for these proceedings focus on materials modeling, eco-material processes and mechanical manufacturing. Volume 1 of this book focuses on topics dedicated to advanced materials and manufacturing technologies, ranging from synthesis of new materials to sustainable development manufacturing technology.